DELL WYSE 5070 wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for DELL WYSE 5070 with power supply
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 88
- Wydruki
- 1
- Wyświetlenia
- 460
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — NoDerivatives
Summary
Wall mount holder for the DELL WYSE 5070 with optional power supply mounting.
The modular design allows the holder to be used with or without the power supply brackets.
Print Settings
Material: PETG (recommended)
Layer height: 0.2 mm
Nozzle: 0.4 mm
Infill: 20–30%
Supports: not required
The model was printed in PETG. Other materials can be used, but PETG provides better heat resistance and durability.
Assembly
The holder consists of three parts: one main holder and two power supply brackets.
The power supply brackets are attached to the main holder.
If you do not plan to mount the power supply, these parts can be skipped.
Parts are assembled using:
2 × M3×8 SHCS
2 × M3 heat inserts
Device installation:
Mount the DELL WYSE 5070 to the main holder using 4 × M4×9 CSK.
Slide the power supply into the dedicated brackets.
BOM
2 × M3×8 SHCS
2 × M3 heat inserts
4 × M4×9 CSK