1 / 4
Dell wyse 3040 mount an 80mm USB fan — zdjęcie 1
1 / 4

Dell wyse 3040 mount an 80mm USB fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

my modification only refers to adding the option to mount an 80mm USB fan

Ocena
0 / 5
Polubienia
6
Pobrania
27
Wydruki
0
Wyświetlenia
226
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The model from “mslo321” was modified by me.
The original comes from “Man-in-Black”

This bracket allows you to mount the Dell Wyse 3040 thin client horizontally or vertically on the wall, on surfaces or directly on the gantry.
- you need at least 2 screws for wall or surface mounting

My modification only refers to adding the option to mount an 80mm USB fan.
- you need at least 4 screws or 2-4 fan decoupling (rubber pins) for 80mm fan mounting

In the Prusa Slicer, I recommend placing the model upright on the closed back. Use a 2mm edge and support structures for the lower and upper fan arches.

Tagi