1 / 5
Wyse C10LE feets
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
You can easily find dirt cheap Via C7 terminals from Wyse. They can work as a retro machine or perform other functions. More often than not you can buy them without power supply and any stand or feets.
I designed mine to be easy to print, just slide in and device is kept in right position, with proper ventilation below.
Printing tips:
- I used PLA, if you plan to use it in closed cabinet or near heat source consider using PET-G or PCTG, device itself gets quite warm
- 0.2mm quality or draft profile
- 3 perimeters (this is important for strength)
- 0% infill (infill does not give any strength here but wastes time for endless retractions)
- print on the side as in a picture to get most of material strength
- Single feet takes around 30 minutes (incl. warm-up), all four takes around 1h 20m