1 / 5
Wyse C10LE feets
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Plastic feets for Wyse C10LE thin client. Just slide from rear of the device and you are ready.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 171
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
You can easily find dirt cheap Via C7 terminals from Wyse. They can work as a retro machine or perform other functions. More often than not you can buy them without power supply and any stand or feets.
I designed mine to be easy to print, just slide in and device is kept in right position, with proper ventilation below.
Printing tips:
- I used PLA, if you plan to use it in closed cabinet or near heat source consider using PET-G or PCTG, device itself gets quite warm
- 0.2mm quality or draft profile
- 3 perimeters (this is important for strength)
- 0% infill (infill does not give any strength here but wastes time for endless retractions)
- print on the side as in a picture to get most of material strength
- Single feet takes around 30 minutes (incl. warm-up), all four takes around 1h 20m