P
Printables
Desktronic HomePro TPU Feets
The original table feet were too slippery, so I drew overshoes and printed them in TPU.
Wyniki wyszukiwania: feets
Liczymy pasujące modele…
P
Printables
Hifi Speaker Feets (compatible Geneva speaker)
A small model for my Geneve XL. Designed for the original countersink screws that came with the stand. I wanted to replace the stand with small feet to have the projector a bit lower. I used the 30 mm version with the original power cord.…
P
Printables
IKEA Skadis Stand Feets Tisch Dish Standfuss Monitor
Wir haben eine Tisch Erhöhung für unseren Esstisch gebraucht um unsere kalten Platten aufzustellen. Werde diese Platten nun weiterverwenden als Monitorerhöhung am Schreibtisch. Die Oberteile werden einfach nur in die Füsse mit eingesteckt…
P
Printables
Lenovo Legion 7 Füsse / Lenovo Legion 7 feets
Dieses Modell ist passend zum Lenovo Legion 7 15IMH. Es ermöglicht dem Notebook durch das abheben von der Tischplatte eine massiv bessere Belüftung vom Gerät. Ich empfehlen den Druck mit TPU da damit das Gerät auch nicht wegrutscht beim…
P
Printables
sealing screws / TPU-feets
Screws for sealing threaded holes, sizes M8, M10, M12, M16. These screws seal threaded holes on the upper edge. This protects them from dirt, paint or similar substances, e.g. when painting workpieces, and also protects unused threaded…
P
Printables
Higher Feets for Ikea Kivik Sofa
I did these to be able to clean under the sofa with the vacuum cleaner. Hight 75mm
P
Printables
Desktronic HomePro TPU Feets
The original table feet were too slippery, so I drew overshoes and printed them in TPU.
P
Printables
Feets for IKEA DRAGAN soap dispenser and toothbrush holder
These functional feet are designed to elevate the IKEA DRAGAN soap dispenser and toothbrush holder slightly above the surface, keeping the bamboo dry and preventing water absorption. This simple addition prolongs the lifespan of the…
P
Printables
REINER SCT // cardreader feets // Kartenleser Füße (*.f3d)
The small arms are a bit weak and broke with PLA. In PETG it worked fine. Fusion file is included so feel free to remix it :)
P
Printables
Decoupling Feets for Prusa Box by Printer Box
I have designed decoupling feets for the orignal feets of the Prusa Box. Just stick a few pads underneath and everything is a little quieter and produces less vibrations.
P
Printables
Feets for Motorhome awnings
This gadget is for camper, who camp there, were the ground is sandy and the normal feets can stuck in the dirt. It gives your marquee more stability.
P
Printables
IKEA Samla feets for felt pads 79x57x18cm / 55L
To secure the feets in place you can use hot glue in the grooves on the top
P
Printables
Prusa MK3 Tall Feets
Designed for short M3 Bolts (M3 x 10 ) combined with T-Nuts. I used my remix of Fallen's model( https://www.prusaprinters.org/prints/127404-3030-m3-drop-in-t-nut-remix ) The feet is 25mm tall, so it raises the printer abit…
P
Printables
Keychron K1 Feets with USB-hub
Foots for the Keychron K1 keyboard with a built-in USB hub. Used parts: Board from ORICO USB Clip Hub 4 Ports Threaded heat inserts M3x4x5 Countersunk head screw M3x7 USB Type-C soldering adapter with screw mount Print Settings Printer…
P
Printables
I:sy Parkstandfeets Ständerfüße Cargobike
Hey hier sind 2 Ständefüße für ein I:sy Cargo mit dem Ständerdurchmesser 22.4 und 22,45 jeh nach dem wie runtergerockt der lack schon ist! :) Hey, here are 2 kickstand feet for an I:sy Cargo with a stand diameter of 22.4 and 22.45,…
P
Printables
Ikea Besta conical feets / legs 10cm M8
Feets / legs for Ikea Besta corpus with a height of 10cm. One feet needs one hexagonal M8 bolt in length of 40mm for mounting. Mounting of the foot: Hold the foot upside down, so that the hexagonal hole show to to top. Insert the M8 bolt,…
P
Printables
Xbox series S Riser Feets
A simple riser plate feets for Xbox series S so it can suck air from below easier improving cooling
P
Printables
Bed springs to rubber feets kit for QIDI Plus 4
This kit made for QIDI Plus 4 with turned-off and removed stock auto z-offset system (QIDI Plus 4 with added Cartographer/Beacon, QIDI Plus 4 modded for bed leveling with inductive sensor only, etc.). Anyway, all modifications you will do…
P
Printables
Desk Shelf Feets
Feets for monitor stand / desk shelf. 2 Seizes avaliable. Avaliable in 30mm (Long) and 26mm (Short) heights. To hold it in place, you can use a 4mm diameter wooden screw.
P
Printables
Hifi Speaker Feets (compatible Geneva speaker)
A small model for my Geneve XL. Designed for the original countersink screws that came with the stand. I wanted to replace the stand with small feet to have the projector a bit lower. I used the 30 mm version with the original power cord.…
P
Printables
SSUPD Meshroom S PC case feets (15, 20, 25, 45, 50, 55 and 60mm height)
SSUPD Meshroom S feets in 15, 20, 25, 45, 50, 55 and 60mm. Should also work well with NCase M2 and M3. Needed hardware (multiply by the number of feets) 1x M3x5x4 heatset 1x M3 bolt of 6, 8 or 10mm length (OPTIONAL) 1x M3 shim/washer,…
P
Printables
Baseplate for Hula Feets for Voron 2.4 Z-Motor Tensioner Mod
Baseplates to fit the Hula Feets on voron 2.4 Printers with the Z-Drive Motortensioner Mod. The Z-Drive Motortensioner Mod is located at Github here:…
P
Printables
M3/M4 Nut/Insert Miniature Vice feets with optional O-Rings
Introducing M3/M4 Nut/Insert Miniature Vice feets with optional O-Rings I used the power of nuts and inserts and added the option of using M3 screws, which are generally more popular. I also added optional O-rings, which improve the grip…
P
Printables
SUNLU FilaDryer S4 Stand adapter 2 rods 4 feets
After purchasing and printing risers for the dryer, it turned out that I have a newer version where the two metal rods are no longer present and have been replaced by four feet. As a result, I had to design an adapter. It should be…
P
Printables
IKEA Skadis Stand Feets Tisch Dish Standfuss Monitor
Wir haben eine Tisch Erhöhung für unseren Esstisch gebraucht um unsere kalten Platten aufzustellen. Werde diese Platten nun weiterverwenden als Monitorerhöhung am Schreibtisch. Die Oberteile werden einfach nur in die Füsse mit eingesteckt…
P
Printables
Open Base for Feets
I removed the inside base of the Feets file. Should still be just as functional and reduce filament and speed up print time. Lite Edit based off the work from @godsci The original files can be found here:
P
Printables
Banggod Feets
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/k5QPTkLg09O Category: 3D Printing
P
Printables
Lenovo Legion 7 Füsse / Lenovo Legion 7 feets
Dieses Modell ist passend zum Lenovo Legion 7 15IMH. Es ermöglicht dem Notebook durch das abheben von der Tischplatte eine massiv bessere Belüftung vom Gerät. Ich empfehlen den Druck mit TPU da damit das Gerät auch nicht wegrutscht beim…
P
Printables
sealing screws / TPU-feets
Screws for sealing threaded holes, sizes M8, M10, M12, M16. These screws seal threaded holes on the upper edge. This protects them from dirt, paint or similar substances, e.g. when painting workpieces, and also protects unused threaded…
P
Printables
Eachine Cvatar feets
Die Originalen Füße von den waren scheiße, hab die vom Green Hornet nachgemacht.
P
Printables
The Transformers - Optimus Prime - 1984 (Corrected Autobots logos/no logos/added flattened feets versions)
Remix of MovieMagic's Optimus Prime model
P
Printables
ABK Case Open Frame Feets
Feets for the ABK Open Frame Case: https://www.etsy.com/de/listing/1247015223/voll-atx-computergehause-open-air
P
Printables
Hatchibabies egg feets
My daughters received Hatchibabies toys for Christmas. They kept the lower half of the egg as a bed or chair but it wasn't stable since the base is rounded (it's an egg, kinda expected!), so I designed this small base to keep the eggs…
P
Printables
FEETS for RatRig Mesh 3030 Enclosure Cuboid
Feets for 3030 Mesh Cuboid enclosure from RatRig I have bought this Mesh 3030 Enclosure Cuboid from RatRig : https://www.ratrig.com/modularenclosuresystem/enclosure-standard.html But it comes without feet… 3030 extruded aluminium can easy…
P
Printables
Hawo Mühle1 Ersatzfüße, grain mill spare feets
Spare feets for a Hawo grain mill. I put some felt stickers on all of them. Happ grinding. Ersatzfüße für eine Hawo Getriedemühle. Ich habe auf alle Teile Filz-Möbelgleiter geklebt. Frohes Schaffen.
P
Printables
Sound dampening feets for Ultimaker 2 & 3
These feet use 50 durometer, 30 and 40mm half-spheres made out of the visco-elastic urethane rubber "Sorbothane" to reduce the amount of conducted vibrations by a lot, without the problems of self-induced oscillation of more springy…
P
Printables
Wyse C10LE feets
You can easily find dirt cheap Via C7 terminals from Wyse. They can work as a retro machine or perform other functions. More often than not you can buy them without power supply and any stand or feets. I designed mine to be easy to print,…
P
Printables
Flsun Super Racer SR Feets
Flsun Super Racer SR Feets for more stability 🦾 The model is at the exact same height as the original feets but you can increase or decrease the height easily in you slicer. Printed in TPU 82A and used in this video: Remixed from:…
P
Printables
Vibration Damping feets for CR10
Vibration damping feet for the Creality CR10 series. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Innofil Innoflex 45 Silver Notes: Any material flexible material…
P
Printables
Antilop chair feets
I wasn't happy when my kid was dragging the chair which was making loud rattling noises so I've decided to use flat feet where I could add floor protectors. And since the legs wasn't perpendicular to the floor and I didn't wanted to deal…
P
Printables
Twotrees TTS55 / TT55S feets extensions 40 & 130 mm
Whenever you want to have your Twotrees laser engraver higher...
P
Printables
Metal rig feets, Füsse für Metallregal
feets for a metal rig FreeCad files added, to allow easy modification Category: Household
P
Printables
Fujitsu Futro s740 feets
Feets for the Fujitsu Futro s740 thin client computer. Just use them in place of the original ones FreeCad files are added, so you are free to midify it to your needs. The repair connector is used in case the original studs are broken…
P
Printables
Feets for solar panel support
MK2.5S ABS 0.2 mm 20% linear advance 1 x hexagonal head screw m8 x 60 3 x flat washer steel M8 3 x Hexa nuts M8
P
Printables
Sound Blaster X Katana replacement feets
Replacement feets for the Sound Blaster X Katana soundbar to raise it a little more from the table. Category: Audio
P
Printables
Feets for Makita AC001 compressor plate
These parts are screwed in a systainer plate and the compressor frame. It allows attaching systainers above the compressor. The top upper front metal bolts are replaced for the front connectors, while 4 ¾'' countersink screws hold the…
P
Printables
Hight adjustable Feets M8
Hi, if you like the Design please leave a like. I had a Storage with Pipes in 30mm inner and 34mm outr Diameter where i needed to deal with uneven floor. In this construdtion you need to put in a 8mm M8 Hex Bolt and in the inner part a…
P
Printables
Feets for Jysk Tistrup desk
I got an older Jysk Tistrup desk that i needed to get 5 mm higher, so it is in level with my second desk. They fit perfect,and doesnt need any glue to hold them in place. Can also be used as replacement if the original rubber feets are…
P
Printables
Prusa Mini damper feets
I made this because of poor stability on foam feet. Print 3x prusa_mini_damper_feet_3x.stl Print 1x prusa_mini_damper_feet_back_1x.stl Print 1x 5th_feet_Z_support.stl Use M5 screws to fit it in profiles. And I used this silentblocks as…
P
Printables
Cougar QBX feets
custom а feets for Cougar QBX. Unlike the stock ones, they do not block the air flow for the video card. I didn't want to make holes in the case to fit the front feets, so I used double-sided tape. Hind feets are installed in stock seats.…
P
Printables
Sonic Pad Feets to hang verticaly on 2020
Feets modified to hang the Sonic Pad verticaly on the 2020 extrusion Category: 3D Printer Accessories
P
Printables
Lenovo P15 (Gen.2) Feets / Stand
To improve cooling and performance, I designed additional feet for my Lenovo P15 (2nd generation). This prevents the warm air from accumulating so much under the motherboard. The keyboard's angle is only changed very slightly, which means…
P
Printables
Hitron CODA-4582 Side Feets
Since I had to put my CODA router sideways I started facing a lot of issues with internet connectivity due to overheating, so I printed some nice feet to increase airflow and my problems were solved. How to use: Just print 4 of there and…
P
Printables
workbench feets holder spring
My workbench has plastic springs to hold the 4 feets after retraction, 3 were broken, so I designed this replacement. printed in PETG for strength: n04 L0,2 6 walls 70% infill in case you have the dame workbench, this may help you too.
P
Printables
DJI Avata Landing Feets
Little Gadged for the DJI Avata. If u need unique landing feets… ;-) i used orange PETG for printing https://amzn.to/3TztjKk If u want a more unobtrusive Landing Gear take a look at this one:…
P
Printables
DJI Avata Landing feets
DJI Avata landing feets I need more space between ground and the avata, so i created this landing feets. i printed it wit PETG https://amzn.to/3TztjKk If u want a more special one u can take a look here…
P
Printables
Ikea Norden 15mm feets with screw holes
Set of Ikea Norden 15mm feets with screw holes. To elevate the Table a little bit. Necessary in my case for my vacuum robot.
P
Printables
Feets for Gusta Garden Equipment
Print it in PETG. Use double sided tape to keep the feets in position.
P
Printables
Füße für Sculpfun; Feets for Sculpfun
Feetattachments with holes for moung it on the Sculpfun S9 and simular frames. It has holes to mount the feets onto the Frame (by M5 screws) and holes to mount it on a Surface like a Table or wooden board. Additional its designt to take…
P
Printables
Desk feets surelevator
i attach the .3df file for mofifying with your own dimentions Printed in PLA with Sidewinder x1 : Layer 0.2 infill 15% …
P
Printables
Monoprice Select Mini Pro Feets for 120mm Fan mod
The stock fan was too loud for my liking, so I replaced it with a 120mm PC fan. to allow for sufficient airflow those feet will lift the printer 35mm + 5mm if you add some cork underneath it. I attached them with hotglue.
P
Printables
Vibration Dampener feets for Prusa MK3/S (30mm extruded profile)
I designed and I am using these feets since the begining with my Prusa MK3S. It was my first conception. Now I can sleep near the printer. VERY EFFICIENT, but you need your spool to be not attached to the frame, because it makes the…
P
Printables
Feets for IKEA childrens office chair
Pull the metal stud out of the wheels and press into the feet. Printed with: 0.15mm layer hight, 6 top and 5 bottom layers, 30% infill and 3 parameters.
P
Printables
Enclosure Container for Printer with Squash Ball feets
This container is designed to fit even if the Squash Ball mod is installed on the printer. The Squash Ball mod can be found here: https://www.printables.com/de/model/447434-squash-ball-mk4mk3smk3s-vibration-damper-v40
P
Printables
Modem Router Feets for TD-W8970
Print 2 of each parts, assemble (it's better to put some glue, but not mandatory), and enjoy ! :) [Last edit] Added a reinforced version of feets for better stability and heat resistance: pied-v1a-h20.stl [/Last edit] Print instructions…
P
Printables
(Un)original Prusa Drybox extended feets
For the (Un)original Prusa Drybox ( https://www.printables.com/de/model/551828-unoriginal-prusa-drybox ) extened feets I had to rise it a bit higher than the original feets to have more clearance underneath for ptfe tubing and an…
P
Printables
25mm Square bar endstop replacement (i.e. IKEA Kramfors leather sofa feets)
Endplug Replacement for 25mm stainless steel square tubes, like the IKEA Kramfors leather sofa. Use PETG or better ASA and 10 vertical walls/perimeters (Alternatively 100% infill). They hold very well and they are slightly higher than the…
P
Printables
Atomstack Laser Feets
Füsse bzw. Halterungen für einen Atomstack-Laser zur Befestigung einer Grundplatte.
P
Printables
Sharkoon Purewriter RGB keyboard feets
verstärkte Füße für die Tastatur. Gedruckt in PLA ist es etwas schwer zu installieren, dafür hält es bei mir ewig. reinforced feet for keyboard. Printed in PLA, it's a little difficult to install, but it lasts forever for me.
P
Printables
2020 extrusion feets
Meant to be a tight fit so you'll need to hammer it softly into place. Feets are intentionally slanted slightly downwards at about a 3.3 angle. Printed at 0.2mm print height
P
Printables
Ferris Sweep case and 10° tenting stand with 8mm diameter rubber feets
After making my sweep bling low profile with choc 1s, I couldn't decide whether I'm going with no case at all, with only the case, or with a stand. So I tried them all, each with their own rubber feets attached. This does make the whole…
P
Printables
Woman Feets - timid pose - pen holder
Feets of a woman sculpture , double as penholders / flower holders use tree supports to build the heels or this print wont be successful For more Naughies 3D models visit my Cult3D profile here :…
P
Printables
Feets Hanging Tree ornament - perfect for spicy xmas tree!
Feets hanging tree ornament - perfect for spicy xmas trees! with ring for easy attachment ( use a small ribbon) Easy print without supports For more interesting 3d models visit my Cult3D profile here :…
P
Printables
(INSIDE FRONT FEETS)SquashBall MK3s/MK3s+ Vibration Damper V3.0 (for toolbox version)
if you love like me the Vibration damper system from Rui Carmo ( https://www.prusaprinters.org/fr/prints/59947-new-version-squashball-mk3smk3s-vibration-damper-v ) and if you also love the Side drawers from djedje_zr7 (…
P
Printables
Prusa MK4 bin with cutouts for anti-vibration feets
I have make cutout for true functional anti-vibration feet model from schuetzi99 . The cutout fits for MK4 standard feet with slip protection version (URL to the right STL). I have used the PrusaSlicer 2.7.0 only so the .3mf file is a bit…
P
Printables
Feets or Stops for anything
I made those cracks for stick in there some doble face tape. It should be printed with TPU
P
Printables
Alcaplast APZ13-DOUBLE9 feets
Alcaplast APZ13-DOUBLE9 feets to replace the factory ones if they break It is a quite fast print and so far it holds I have printed it in PETG Print it on its side layer height 0,2
P
Printables
Adjustable feets
Adjustable feets to be used with anything really! Print without supports!
P
Printables
Anti vibration feets
I've been using the Hofftari feet for my desktop printers, but on some prints it tends to wiggle some, got an idea to try squash balls for vibration damping, since they are made of a rubber used at industrial vibration damping…
P
Printables
Tischtennisplatte Rohreinsatz / Fuß / Rohrstopfen // table tennis table feets/ pipe inserd for wheels
Es wird zusätzlich noch folgendes benötigt: 2x => M3 x 40 Zylinderkopfschraube 2x => M3 Mutter Gedruckt wurde mit Stützenfunktion, Material PETG. Das Original habe ich nur gezeichnet aber nie gedruckt, da die Lamellen, die dazu dienen,…
P
Printables
Squash Ball Feets for Prusa i3 MK3 (3030 profile)
This feet attaches to the Prusa i3 MK3 (or similar 3030 extrusion profiles). It holds a regular squash ball and lowers the amount of vibration going into the ground. The shape resembles the overall design language of the Prusa printers.…
P
Printables
Ender 3/PRO/V2 | Adjustable Silicone Feets - Very Grippy
Reuse your old silicone bed mounts into four very grippy feets. I was tired of my Ender 3 V2 moving on it's own with the stock bad feets. I also needed to raise the whole machine to convert it to the Voron theme. So I took some time in…
P
Printables
big feets for Creality Ender-3 V3 Plus &Ender-3 V3
The feet on my V3 PLUS were not quite flat, I designed this, it fits over the periphery of the original feet, with a flare on the bottom to deform it to release gravity, and now my machine runs very stable! Print settings: material…
P
Printables
ANOTHER feets for Ender 3 KE SE
height adjustable by rotating bottom part top (1) and bottom (2) parts printed in PLA or PETG brim (2) printed with TPU or resin-like plastic
P
Printables
Ender 3 SE/KE wide Feets
After one of my mainboard fans failed I wanted to raise the KE and SE to get more clearance. This is the KE and SE wide feet version. Printed in PLA 0.16mm, 3 walls and 4top and bottom.
P
Printables
Qidi Q1 pro feets
Since my Q1 pro is on a server rack which has a fan in the top that blows air outwards. As the distance between the server enclosure and the Q1 pro was too small, I thought about designing new feet. As it was unfortunately not possible to…
P
Printables
Prusa MK3 hard feet higher UPDATE RubberFeets
Just a bit higher ;-) I've added rubber feets to the hardfeets. Printed in filaflex with 10% Concentric Infill and Top/Bottomlayer fill pattern in Archimedean Chords. UPDATE 29.09.2019: added gcode to use with filaflex. Print instructions…
P
Printables
SD Card Holder with feets
I added some feets, so the box can sit. I printed with Prusa Mini. I used PLA, 15% infill, NO supports.