Bed springs to rubber feets kit for QIDI Plus 4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Details for mounting QIDI Plus 4 print bed with rubber feets instead of stock springs
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 286
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This kit made for QIDI Plus 4 with turned-off and removed stock auto z-offset system (QIDI Plus 4 with added Cartographer/Beacon, QIDI Plus 4 modded for bed leveling with inductive sensor only, etc.). Anyway, all modifications you will do on your own risk.
Rubber feets you can buy on AliExpress. Fits any of them with outer diameter 16mm, inner diameter 4-5 mm and inner enlargement for M4 nut. You can find some examples below:
Make installation for my pictures as example. Before installation remove factory z-offset sensors, if you don't do yet. Also, for experiment, you can print hard feet model and use it instead of rubber one (i don't recommend do that).
Recommendations:
- Layer height - 0,24 mm
- I recommend to use material with high heat resistance, like PA, PC, PPS, etc
- Use thread lock fluid with nuts