Liczymy pasujące modele…
This is a Fully enclosed 1in riser for the Qidi plus4 printer, Consisting of 6 separate pieces. This has slots done over the grab handles and along the back for material reduction (this is a hefty print as it is) but can be used to put…
This part for the Qidi Plus 4 raises the height of your filament spool with 75mm for extra clearance of riser units like my own design or to use larger spools without a vented riser. It is recommended to use more walls and higher…
Easy way to hang your top cover on the left or right side.
Heatsink Fan Mount Ducted Square modified slightly to fit The Conch Qidi Plus4 hotend with Stew675's carrier plate.
I made this because the carbon pellets in the stock machine is too small for high VOC printing like with ABS, this recirculating vent holds a LOT of carbon pellets and a hepa filter as well as 4020 blower fans if you want. like the…
Made this for my QBox at tangle sensor. Suggest printing: Mat: ABS - PA612-CF or equivalent (NO PLA) Layers: 0.08 ~ 0.12 max full walls and 100% infill or you can try 1 wall-100%infill with ALL SOLID SURFACE ironing SEE VIDEO…
I needed a third hand to hold the tangle sensor tube while I depressed the PTFE holder with one hand and inserted the tube securely with the other. Printed in PETG for flexible strength. Used the Plus4 Strength profile. Added a 8mm brim…
This is a Fully enclosed 1in riser for the Qidi plus4 printer, Consisting of 6 separate pieces. This has slots done over the grab handles and along the back for material reduction (this is a hefty print as it is) but can be used to put…
In order to print PLA, you need to vent the chamber. I designed a quick and simple lid prop. I would print this and in at least PETG, likely higher temp filament like ASA or ABS. No supports, no hassle, quick print.
The stepper motor drivers on my Qidi X-Plus 4 were reaching temperatures of up to 100°C. I mounted a 40mm x 40mm radial fan with a 3D printed mount. This reduced the temperatures by around 30-40°C. You will need a 40mm x 40mm radial fan…
This part for the Qidi Plus 4 raises the height of your filament spool with 75mm for extra clearance of riser units like my own design or to use larger spools without a vented riser. It is recommended to use more walls and higher…
Guarding touchscreen from toddlers that like to push buttons on screen :) Slides from top to bottom and vice versa. Use both hands to do it straight. Print verticaly. I've used 0.6w walls and 0.2 layer height.
This is a Qidi Plus4 rear vent cover which accepts bigger fans (80mm/92mm) and allows attachment of big poop/purge bin - https://www.printables.com/model/1055602-qidi-plus-4-purge-trash-bin
Beacon Simmetric Holder Reworked for QIDI Plus4
The changed fan grille allows for more airflow to be brought in by the fan. I printed mine in ABS and had just a tiny bit of shrinkage.
I needed a third hand to hold the tangle sensor tube while I depressed the PTFE holder with one hand and inserted the tube securely with the other. Printed in PETG for flexible strength. Used the Plus4 Strength profile. Added a 8mm brim…
Made this for my QBox at tangle sensor. Suggest printing: Mat: ABS - PA612-CF or equivalent (NO PLA) Layers: 0.08 ~ 0.12 max full walls and 100% infill or you can try 1 wall-100%infill with ALL SOLID SURFACE ironing SEE VIDEO…
This is an internal board mount for the Qidi Plus4. It fits over a couple of posts near the mainboard. I designed this to hold a raspberry pi and buck converter so I could use the pi as a host for stock klipper. I followed DrFate09's…
Better Tab to hold the top glass Glass is heavy, use ASA or PETG to avoid heat creep issues. I also suggest gluing them in place Mirror model for other side.
A remix of the awesome lid. I printed it in black ASA GF filament.
Mounts in the slot for the carrying handle, hangs the lid by the side of the printer
2mm thickness 330g with 0.2mm layer and tree support narrower≈290g for narrower one, I strongly recommend to use support enforcer as shown in picture I uploaded
Ein Filtersystem, das neben Aktivkohle auch einen Feinfilter enthält, könnte beim Drucken mit ABS von Vorteil sein. Die Aktivkohlepellets werden in das Innere des Filtergehäuses eingefüllt, bis es zu etwa drei Vierteln gefüllt ist. Bevor…
V1.1: much smaller back panel cleaner model PRINT WITH ARACHNE (Orca Slicer: Quality → Wall generator → Arachne). Otherwise the thin support connectors may not print at all. ----------------------------------------------- This is a…
In order to print PLA, you need to vent the chamber. I designed a quick and simple lid prop. I would print this and in at least PETG, likely higher temp filament like ASA or ABS. No supports, no hassle, quick print.
A clip to hold the chamber fan with broken screw closer to the wall. This is to avoid bed tilt errors. Use PETG or ASA for better thermal resistance.
Please only print if you are OK with testing. Coming from the DIY printer world, I am not a big fan of the automatic belt tensioners on the Plus4. I desire too much control. So, I made new mounts and an insert to replace them with…
Summary The Plus4 can sometimes suffer from Heat Creep in certain conditions. This duct/plenum attempts to better route the air from the intake fan over the heatsink to minimise the risk of heat creep for parts with many fine retractions,…
Update 11/10/2024: Uploaded modified parts 1 - 4 You can find them as parts 1 - 4 V2 Resized them in the middle section, where the PTFE tubing was rubbing against it. With these new parts there's no need to print out plug #3, but you need…
UPDATE: RC2: Smaller diameter cylinder so it actually fits through the hole… Smaller length cylinder so you can install it without tension applied to the belts. I only had 30mm long screws at home so I started to design a variant that…
Download TPU printed parts and PETG printed parts from here https://makerworld.com/en/models/417509#profileId-319901 Use the center core for K1 or Voron
Qidi Plus4 Broken Heater Chamber Mount Fix - Nut & Bolt substitute. I made this part instead of using the recommended nut-and-bolt solution proposed by Qidi support when my heater chamber fan snapped off. Made this fix to integrate a…
A simple rear cover panel for upgrading to a 120mm fan instead of the tiny 4010 fan that cools the motherboard. This lowers the temperature of the board and drivers dramatically. I specifically used this fan - https://amzn.to/40oXwB6 but…
Wago 221 (2 connnector) mount for Qidi Plus4 inner wall standoff
I created the adapter standoff for @Sarge013 low profile heatsink SSR mount (FIRST VERSION) . NOTE: There may be a new version available from @Sarge013 now. I had to make these as I was in a slight bind because I had already removed my…
I made a small cover for the right side panel bolt. The bed cable has a tendency to get snagged behind it and this cover prevents that. I made a project file for the QidiPlus4 with height modifiers so the final surface finish is…
Dieser Filamentabfallbehälter für die linke Seite des Druckers besteht aus zwei Komponenten: einer Rutsche und einem Sammelbehälter. Die Rutsche besteht aus dem Hauptkörper und einem Deckel, die nach dem Druck einfach zusammengesteckt und…
Diese Erweiterung für den Glasdeckel des Druckers besteht aus sechs Segmenten, die nach dem Drucken einfach ineinander gesteckt werden können. In den Mittelteilen sind zwei Gehäuse für Sepa-Filter mit den Maßen 81 x 42 x 15 mm integriert,…
Hab mal einen Halter erstellt damit man den Sunlu S2 an der Seite der Qidi Plus4 aufhängen kann. Einfach die 2 Schrauben vom Handgriff abschrauben, den Halter einstecken und die Schrauben wider reinschrauben. Der Haltegriff kann im Gerät…
This is my attempt at making a replacement for the internal chamber circulation fan filter box on the Plus 4 that can accept HEPA filters. I used the same filters as the person who previously designed one, but I designed it a little…
Qidi Plus4 10mm x 3mm Belt Tensioner Shim There have been report(s) of reducing some VFA using either belt tensioners like one by @Jerky_FPV_1021902 or adding spacers (3 stacked M5 washers) in the stock preloaded tensioners and rewracking…
Please only print if you are OK with testing. If you're familiar with my previous replacement for the stock Qidi Plus4 auto belt tensioners here , these are an attempt at an improvment on those. This design utilizes the stock spring…
Replacement for the QIDI Plus4 handle used to lift up the printer. I measured the original one and modeled it in FreeCAD. Now you can make handles in any color you'd like! *Printing I highly recommend printing this laying down to avoid…
Toolhead filament sensor to replace the Qidi hall filament width sensor. Useful for filament changer systems. Uses the wiring and connector of the original filament width sensor. Uses the 6mm collet from the original filament width…
Eine verbesserte Lösung zur Kühlung der Hauptplatine des Druckers, bestehend aus einem Hauptteil und einem Deckel für die Filterseite. Für den Lüfter habe ich mich für dieses Modell entschieden: https://www.amazon.de/dp/B086SKG982 ?. Der…
I have some older PLA spools that are too wide to be held by the original filament holder on the QIDI Plus4. This inserts in place of the cap, with three extension positions. The original cap goes into the end. Print Settings Printer:…
The stepper motor drivers on my Qidi X-Plus 4 were reaching temperatures of up to 100°C. I mounted a 40mm x 40mm radial fan with a 3D printed mount. This reduced the temperatures by around 30-40°C. You will need a 40mm x 40mm radial fan…
Qidi Plus4 Cover Mainboard Abdeckung for Bigger Mainboard Fan Better Cooling and easy swap Cooler Amazon :…
This remix adds 3mm of spacers for the ring and screw holes to slightly reduce fan noise.
I received a request to create a replacement cap for the QIDI Plus4 printer filament holder. This seems to work. I'm using it now to print a second one. I'm printing in generic ABS with a 15% grid in infill. I added a 5mm inside & outside…
Adjusted Bambu Poop Chute for QIDI plus4 & https://www.printables.com/@spi0003_2484647
Guarding touchscreen from toddlers that like to push buttons on screen :) Slides from top to bottom and vice versa. Use both hands to do it straight. Print verticaly. I've used 0.6w walls and 0.2 layer height.
The rear vent shield is contained in two versions altered for 24V-80mm-fans for enhanced airflow: A lasercut model from acryl and a printable model with reinforced structure. Both can be fitted with 80mm fans to replace the original, tiny…
Another poop slide for the Qidi Plus 4. This one can be printed in one part as it comes ready with break away supports. It features detachable trash cans in two sizes. The trash cans are held in place by 5 small magnets on each side (10…
This is a newer ‘drop that can snap onto the input port of the printhead, and has a bevel on the input side of the elbow to ease install of the PTFE tubing. Note it’s intended to be a firm grip on the process so the tube doesn't easily…
Want to keep your toolhead cooler than the chamber? use peltier cooling! now with 95% enclosed toolhead! Why are you here? why are you doing this? do you know what you're doing? what if your machine breaks? what if you start a fire? are…
I thought it would be nice to replace the ugly useless handles with simple covers. Remove the screws and handles, and set aside. The covers gently pry out with a small slotted screwdriver if needed. Or, tap a screw hole in the middle and…
I thought it would be nice to replace the ugly useless handles with simple covers. Remove the screws and handles, and set aside. The covers lift out easily. I printed on my QIDI Plus4 in "burnt titanium" multicolor ABS in “Strength”…
Strong, super-light, minimalist rear tool-head cover for the Qidi Plus 4 Important: Read the Caveats section below even if you read nothing else! Updates 3rd April 2025: I've uploaded a slightly wider model. There was a chance in a very…
The USB port seems rather overexposed and this seems like an obvious upgrade. Should reduce anxiety and keep the USB port and flash drive protected when replacing the cover. Uses the original flush head case screws. To make it easier to…
This is an extended filter basket. The HEPA can sit on top of the filter and then the carbon material can go below it. The HEPA filter is the same as others https://www.amazon.com/gp/product/B0782T7L6P (HEPA Filters Replacement for ILIFE…
This design utilizes the stock spring itself but allows the user to adjust the tension with a screw. I have remolded the original model so that there is more material near the top and have added the correct hole size and depth for the M5…
I was having trouble obtaining a M8 100mm bolt for a reasonable price so I remixed it to use Imperial hardware. Print the aufnahme and mutter STL files from the original. For the spool holder, the following hardware is required 5/16" -…
A design for mounting a Beacon3D H Normal probe onto the tool-head of the Qidi Plus4 Update: 10th April 2025 I have uploaded an M3 screw variant of the mount for later model versions of the Plus 3 that use M3 bolts instead of 2.5mm…
Spool holder for Qidi Plus4 with bearings so that your spool will turn smoothly. Materiel needed : 2 x 6804 bearing.
Update: This design is now on version 3, which is even less tall that some of the previous makes. It is reliably working on my machine. After printing and installing the modified filament cutter block, I noticed that there was still a lot…
Compatibility: A very rigid mount for your eddy current probe. Compatible with - Beacon3D revD, revH - Cartographer3D (the one that has the same shape as beacon revD) NOT compatible with: - BTT Eddy The model allows you to swing the probe…
A part that I attached to my dry box to enable me to mount it to the QIDI Plus4 spool holder. It uses 3mm screws (just because I had some). I printed it in PETG at 2.0 on the QIDI 2.0 strength profile. Look at the photo of it mounted and…
An easy to print, replacement for the Qidi Plus 4 end-stop cutter activation block. Print with a 0.2mm layer height in any material capable of withstanding at least 85C temperatures without going soft Reduces the end-stop exclusion zone…
Eine verbesserte Lösung zur Kühlung der Hauptplatine des Druckers. Für den Lüfter habe ich mich für dieses Modell entschieden: https://www.amazon.de/dp/B086SKG982? (GDSTIME DC 24V Lüfter, 80 x 25mm). Der ausgewählte Lüfter ist bürstenlos,…
Dieser Adapter ist passend für den Spulenhalter des Bambu Lab A1 und besteht aus zwei Teilen, die nach dem Drucken einfach ineinandergesteckt werden. Das Zusammenstecken ist bewusst etwas stramm, um einen sicheren Halt zu gewährleisten.…
我使用了耐高温的双面胶带进行粘合。根据卖家的描述，这种胶带是为连接 LED 灯条而设计的，可长期耐受高达 120 摄氏度的温度和高达 180 摄氏度的短期耐受性。您可以通过在购物网站上搜索“LED 耐高温双面胶带”来找到它。它只能与“Qidi Plus4 超轻后置工具头套”配合使用。
Eine Ersatzkappe für den originalen Filamenthalter des Qidi Plus4. Sie besteht aus zwei Teilen, die nach dem Druck einfach ineinander gesteckt werden. Die Verbindung hält sehr gut ohne Klebstoff, kann aber bei Bedarf mit Kleber fixiert…
Replaces front panel of stock camera mount to add ventilation and adds easy to grip hood to lens for focus adjustment. Existing camera will need glue removed from its lens barrel to permit focusing. Installation is under ten minute…
This alternative shroud requires 4x m3x12 screws, 4x m3(x2.3mm) nuts and 2x 5x2mm neodymium magnets. Printed in TECBEARS PETG it weighs 32g vs original 40g shroud but will vary depending on filament. See images for print orientation and…
Simple build plate holder for 5x 310x310 plates. Printed mine in ABS but should be fine with any material. Hope someone finds it useful.
All prints are with no supports easy prints. draw fit is snug and stay in place when pulled out. prints are all done in pla+ 0.28 25% infill 230c hotend 60c bed.
This is an articulated double hinged door frame seal that I designed some time ago and have only gotten around to testing, it's been up on printables for a while but I minimized tagging it or sharing it to get it to a better releasable…
Some important notes if you're reading this: The deep version of this is a MOSTLY UNTESTED model. I've printed it once, determined it's dimensionally correct, and then got stuck working on something else. I haven't even tested if the back…
Placing the 1 kg spool lower down reduces the impact of having such a heavy item so far from the printer's centre of gravity. As a bonus, it allows one to see at a glance how much filament is left on the spool, instead of having to crane…
This is a Qidi Plus4 rear vent cover which accepts bigger fans (80mm/92mm) and allows attachment of big poop/purge bin - https://www.printables.com/model/1055602-qidi-plus-4-purge-trash-bin
This build plate holder is designed to hold 4 pcs of 310mm build plates. Dimensions: Overall Length: 330mm Main body width: 40mm Overall width: 120mm Overall height: 60mm Print settings (I used PETG, but feel free to print with any…
Please use STEW675 holder https://www.printables.com/model/1253290-modified-for-attach-the-head-front-cover-with-the
Beacon Simmetric Holder Reworked for QIDI Plus4
Follow the same instructions as the model the is remixed off of, and use the new double walled back plate that is posted here https://www.printables.com/model/1237621-draft-beta-double-walled-backplate-for-insulating
This model of the cooling fan moves the fan output nozzle over so that it does not touch the E3D revo High Temp hotend running on a Qidi plus4 Use at your own risk
(Excuse my print quality on my sample image, I was experimenting with a new filament.) This is a monitor housing for the Qidi Plus 4 that replaces the original housing. it does a few things: Adds a hinge so that you can adjust the angle…
A silicone rubber gasket with outer diameter of 100 mm and diameter of 3.5mm is required. This adapter can be connected to a duct with a diameter of 100 mm . Depending on the hardness of the silicone O-ring you use, you may need to cut…
Models of the OEM spool holder and chassis mount for the QIDI Plus4. These are modified versions of the models from QIDI, but slightly more appropriate for 3D printing (vs. injection molding). I haven't printed these yet, and they have a…
The original filament spool holder of the QIDI plus4 printer does an adequate job, but in combination with some spool materials a slip-stick-effect can occur causing quite anoying sound emissions, which can easily be mistaken for a…
I store my printer in a cabinet and due to bad measurement on my part, I can't close the cabinet door properly if I wanted to also have a poop chute and not choke my rear fan. Designed this handle to allow me to place the printer as close…
There are two models here, one is a stock toolhead cover but modded to include a 2510 fan to cool the front PCB The second is my version of toolhead for a 4020 nozzle heatbreak cooling fan that also has a 2510 cooling fan option for the…
This mods the stock fan so that there is a place to mount the Beacon RevH. There is also a hole for the cord to go. Use normal Beacon RevH's not the low profile versions First version mounts on the front, the hole is for the cord to go…
I had heard that the Xmax3 are the same size as the Plus4 and are swappable (with some changes to the plug) (reports are the q1pro hotends are the same length as the plus4) Later on I heard that it is 4mm short. So I Stewy helped me with…
Was inspired by the remixed design, but made a few significant changes such as: - Removeable poop tray, with angle of slide adjusted to suit - I found the slide was a little too short for my setup, or it could of just been my mods, so it…
When seeing the original design, I especially wanted to make a toolhead using Noctua's 24v 4010 fans. I did a test print of the original in ABS and the walls were just too thin. One cracked while removing a support and another cracked…
Made a slight adaptation to the original model to allow it to mount to the front glass of the Qidi Plus4. The original screws are a little tight so I suggest threading them through the mount first and make sure to seat them all the way to…
The changed fan grille allows for more airflow to be brought in by the fan. I printed mine in ABS and had just a tiny bit of shrinkage.
This is a spool holder for QIDI Plus4 that you can hang on the side, utilizing the bolts that hold the left lifting handle. As such, it's probably INCOMPATIBLE with many of the available risers You can use it with the stock filament hook…
I remixed a STEP file of the original spool holder to mount the creality digital spool on it. You'll need two M5 nuts a
