1 / 2
Qidi Plus4 10mm x 3mm Belt Tensioner Shim
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Qidi Plus4 10mm x 3mm Belt Tensioner Shim
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 297
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
Qidi Plus4 10mm x 3mm Belt Tensioner Shim
There have been report(s) of reducing some VFA using either belt tensioners like one by @Jerky_FPV_1021902 or adding spacers (3 stacked M5 washers) in the stock preloaded tensioners and rewracking the gantry. Created this simple shim in the even no M5 washer were available.
Would recommend printing in ASA, ABS (PETG would probably work) with 100% infill