1 / 1
Qidi Plus4 Riser print friendly with recirculating carbon filtration vent
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Same as the previous riser with a slanted front but has a recirculating vent holding carbon pellets a hepa filter + fans
- Ocena
- 1 / 5
- Polubienia
- 8
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 477
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (1)Kolekcje (16)Powiązane
I made this because the carbon pellets in the stock machine is too small for high VOC printing like with ABS,
this recirculating vent holds a LOT of carbon pellets and a hepa filter as well as 4020 blower fans if you want.
like the previous version, this is printer friendly,
- use the auto lay flat option for the frame parts
- for the recirculating vents print them standing up, I've chamfered the filter holding ledges so it can be printed with minimal supports,
- Only use supports on the vent output, and the round connecting piece that connects directly to the machine's vent with it's arms.
- you shouldn't need supports on the body parts that hold the carbon pellets even with the screen part, they are small enough to bridge relatively easily.