1 / 1
Qidi Plus4 Riser print friendly with recirculating carbon filtration vent
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Same as the previous riser with a slanted front but has a recirculating vent holding carbon pellets a hepa filter + fans
- Rating
- 1 / 5
- Likes
- 8
- Downloads
- 57
- Makes
- 0
- Views
- 480
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this because the carbon pellets in the stock machine is too small for high VOC printing like with ABS,
this recirculating vent holds a LOT of carbon pellets and a hepa filter as well as 4020 blower fans if you want.
like the previous version, this is printer friendly,
- use the auto lay flat option for the frame parts
- for the recirculating vents print them standing up, I've chamfered the filter holding ledges so it can be printed with minimal supports,
- Only use supports on the vent output, and the round connecting piece that connects directly to the machine's vent with it's arms.
- you shouldn't need supports on the body parts that hold the carbon pellets even with the screen part, they are small enough to bridge relatively easily.