QIDI Plus4 Handle Covers | Flush with Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flush covers to replace the unsightly lifting handles and holes with a smooth surface matching the case.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 294
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I thought it would be nice to replace the ugly useless handles with simple covers. Remove the screws and handles, and set aside. The covers gently pry out with a small slotted screwdriver if needed. Or, tap a screw hole in the middle and lift out with plyers (print new more stylish ones after moving).
I printed on my older QIDI X-Plus in silver ABS in “Quick” profile (0.25mm) with a 5mm brim. I broke off the brim, then used a metal rasp and an angled foam sponge to clean the bottom edge. I figured PLA would sag so I avoided it. Other filament types might work.
Tip: print upside down on the QIDI Plus 4 PEI plate for nice a textured look, of remix and add a pattern.