QIDI Plus4 Handle Covers | Flush with Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flush covers to replace the unsightly lifting handles and holes with a smooth surface matching the case.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 32
- Makes
- 0
- Views
- 294
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I thought it would be nice to replace the ugly useless handles with simple covers. Remove the screws and handles, and set aside. The covers gently pry out with a small slotted screwdriver if needed. Or, tap a screw hole in the middle and lift out with plyers (print new more stylish ones after moving).
I printed on my older QIDI X-Plus in silver ABS in “Quick” profile (0.25mm) with a 5mm brim. I broke off the brim, then used a metal rasp and an angled foam sponge to clean the bottom edge. I figured PLA would sag so I avoided it. Other filament types might work.
Tip: print upside down on the QIDI Plus 4 PEI plate for nice a textured look, of remix and add a pattern.