Ferris Sweep case and 10° tenting stand with 8mm diameter rubber feets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified 5.8mm height case and 10° tenting stand for the case.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 123
- Wydruki
- 0
- Wyświetlenia
- 1056
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After making my sweep bling low profile with choc 1s, I couldn't decide whether I'm going with no case at all, with only the case, or with a stand. So I tried them all, each with their own rubber feets attached. This does make the whole thing taller and thicker, but now I can choose to type however I want, with or without cases or stands.
If you want the case to be at different angles, well… I tried 30~10°, 10° works best for me. I have STLs of 30 and 20°, but all without holes and acts like small drums. Just draw with Fusion and use project on sketch and loft functions. The outcome will be more meaningful if made yourself, right? 😏
Remember to mirror it if you going for the other side.