Liczymy pasujące modele…
A desktop nameplate, sweeping around in a circle. Customize it to show your name or text. To do that, use the makerworld customizer (fonts are only Arial currently) or install OpenSCAD on your own computer and follow the customizing…
Wydruk około 5,62 €–6,87 € nettoWstępna wycena jednego wariantu
Designed another super short nozzle for my M18 Fuel blower to help with cleaning tasks around the shop. This one has a sweep/broom/wide opening, especially useful for drying your car. I printed at 1.5mm line width using a 0.8mm nozzle and…
Wydruk około 4,45 €–5,44 € nettoWstępna wycena jednego wariantu
Do not put in the dishwasher, the PLA would not withstand it. Introducing the Table Crumb Sweeper - Kitchen Assistant , your ultimate helper for keeping tables, countertops, and other flat surfaces tidy! This tool combines a sleek dustpan…
Wydruk około 2,04 €–2,49 € nettoWstępna wycena jednego wariantu
I printed some "Trash Bin for Sweeper Car" https://www.printables.com/model/324597-trash-bin-for-sweeper-car-popelnice-pro-cistici-vu). I use them to collect filament poop from changing material, support structures etc. But there is no…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena jednego wariantu
Cleans the T-Slot on a milling table. T-slot size: Tee Width: .700", Tee Height: .280", Slot Width: .406 Used default slicer settings for PETG material.
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bristle deflector for Ryobi Cordless Debris Floor Sweeper 18V ONE+ (R18SW3)
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
Cleans the T-Slot on a milling table. T-slot size: Tee Width: .670", Tee Height: .305", Slot Width: .420 Used default slicer settings for PETG material.
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cleans the T-Slot on a milling table extension. T-slot size: Tee Width: .836", Tee Height: .365", Slot Width: .480 Used default slicer settings for PETG material.
Wydruk około 0,40 €–0,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made this for the NeedItMakeIt fan duct contest and it won! It's a lightweight high performance fan duct for the FLSUN T1. This was a first attempt at a fan duct (for a printer that I don't even own lol) so I'm pleased with the results.…
material PLA a 21 millimeter long piece of filament is used as a pin, which you insert into the hole in the lid and the bin
A street sweeper truck, also known as a street sweeper, is a specialized vehicle designed to clean streets, roads, and other paved surfaces. These trucks are equipped with various cleaning mechanisms, such as brushes, vacuum systems, and…
Roomba Replacement Roller Sweeper fully customizable written using openscad tested with Roomba I4 should work fine with i3 i3+ i4 i6 i6+ i7 i7+ i8 i8+J7 J8 /Plus E5 E6 E7 I,E & J Series Settings Warnings roller_sweeper_aggression - the…
This little crumb sweeper is just like the ones you see at the fancy restaurants, complete with a 3D printed roller brush. A few sweeps back & forth (works in either direction) kick the crumbs up into the little catch tray. The hard part…
The UV Sweeper is Patent Pending and will be sold directly only through www.3DReefing.com Organisms like sand dwelling dinoflagellate's have plagued the aquarium hobby for decades. With the UV Sweeper you will be able to target eliminate…
screw for the side brush of the Kärcher S 4 Twin sweeper
This is a Roomba series 675 side sweeper drive gear replacement. It is perfect for printing if you stripped the screw hole in the original gear or your original gear's teeth started grinding off. Print Instructions Material: PETG, ABS or…
Use it to sweep the interior of the bambu x1.I print with PETG and TPU.no Supports.
material PLA a 25 millimeter long piece of filament is used as a pin, which you insert into the hole in the lid and the bin screw 2x M3x6 37x44x50mm
A simple floor sweeper (Swiffer) with TPU attachment wipes. Can be used with whatever fits like dryer sheets or old rags. There is a small (140x125mm) and wide (180x125mm) version. This file uses the pole attachment parts from the Dryer…
rather than pay a small fortune for the factory replacement, i gave this a shot. tested initially in PLA and didn't have any issues. the hardest part is transferring the rubber tread from the original to the new wheel without breaking the…
I've been inspired by all the various Sweeping name plate templates, but I enjoy modelling as much as printing, so I remade the basic model using FreeCAD. To change the text that is printed, check out the FreeCAD screenshot. Select "NAME…
I remixed this model to be longer and slightly wider to act as a crumb collector to sweep up little bits of wire, insulation, filament, or whatever else. Of course I could have just scaled up the original model in those 2 dimensions, but…
Wheels for a yard commander lawn sweeper. Print solid.
You can screw it with 3x16 Woodscrews to the wardrobe or similar I recommen to print it out of PETG. Printed with 0.4 Nozzle and 0.2 Layerheight.
# Roomba e5 Sweeper Upgrade - Printable Replacement Rollers ## Overview This upgrade provides printable replacement rollers (dredges/sweepers) for Roomba vacuums. Designed for Roomba e5 (purchased from Amazon), but adaptable to most…
Milwaukee blower sweeper nozzle
Our Eufy 11s vacuum needed a sweeper gear. There are a few models already, but they use a different gear pitch with 46 teeth. Ours needed 38 teeth so I designed a new one. I printed with a 0.2 mm nozzle with PLA+. Other nozzles should…
Meet the Pumpkin Skeleton — part pumpkin, part bone, and 100% ready for Halloween mayhem! With his evil grin and trusty broom, he’s here to sweep the competition (and maybe a few cobwebs) away. Perfect for spooky displays, haunted…
Commercially available magnetic sweepers are usually 600mm / 2ft wide and too bulky for my small home workshop. My solution was to design a smaller version (which ended up being approx 235mm wide) that can get into smaller areas and be…
This sweeper attaches to the existing fan holes on the front of the print head, use custom GCODE after the printed part has cooled to sweep off the build plate. Best Material: ABS - Shrinks sufficiently after cooling, leading to easy…
Replace a weak swivel sweeper battery with 6 rechargeable AA batteries. Additional parts: 1 copper wire (approx: 1.5 mm diameter / 38 mm long) 2 spax screws (approx: 3 mm diameter / 12 or 16 mm long) 6 rechargeable AA batteries…
添加中文实例，演示了楷体和微软雅黑的使用示例。
Added support to the Dryer Sheet Swiffer that was created by Julius 3E8 to be used with a standard broomstick handle. Only changed the mount for the sweeper pole. For all other parts see the original model used.
I also used this model for the mounting bracket: https://www.thingiverse.com/thing:2850837 printed in too wet ABS, with still some red PLA in the nozzle lol. as long as it's functional! and I'll experience that very soon :)
Source files for a simple floor sweeper (Swiffer) with TPU attachment wipes. Can be used with whatever fits like dryer sheets or old rags. There is a small (140x125mm) and wide (180x125mm) version. See the public file for more information.
My dad has a couple of floor magnets and over the years the wheels broke. He had made some out of wood, but once I got a printer, I modeled up some replacement wheels. here is a video of the finished parts: I printed with 3 walls, but you…
This is an autonomous robotic dust sweeper. It's not meant to be state-of-the-art, but a fun way to learn about robotics. Nonetheless, it's not totally useless :) Building it might not be the easiest thing in the world, especially since I…
This is an over-powered and over-engineered spring sweeping beast, with a touch of style so that it looks nice on your workbench. 8 true N52 power magnets are arranged in a specific Halbach array to maximize effectiveness. A lot of…
The clips lock the actuators, so that the handle doesn't push them down when you flip the machine upright.
# Swiffer Sweeper H-1960 End Replacement. [Github](https://github.com/myxxmikeyxx/Swiffer-Sweeper-H-1960-End-Replacement) [Thingiverse Link](https://www.thingiverse.com/thing:6842343) [Maker World](https://makerworld.com/en/models/812954)…
3D Sweeping Text You can print the whole plate in a single color or multi-color. If not using an AMS or MMU, you can manually swap the filament at 25th layer, 5mm (printed with 0.2mm layer height). Filament Used: PLA+ AceAddity White PLA+…
Modified the original bucket into a sweeper brush.
Sonntagsprojekt... The power of sweeping... (Eine wirklich TOLLE Funktion!) Fusion f3z-File ist angehangen... Versuch_2 als stl-Files hier zum Download... Der Druck in Originalgröße und mit viel Support dauert viele Stunden... Damit die…
The specs: 8 true N52 high powered magnets (3/8" cubes, ~80 cents a piece) Magnets arranged in a K=1 Halbach array format Field strength measured to be as high as 4,388 Gs 70mm X 69.95mm X 34.66 mm How to use: With the magnets facing the…
INTRO The SweetGum Sweeper was my solution to not only cleaning the yard, but reusing leftover (new) Prusament spools. Other companies in the market for designs like this are charging over $400 USD and I wanted to change that. Thanks to…
TRI-SWEEP Three cleaning tools. One print. No hardware. TRI-SWEEP is a 260 mm equilateral cleaning tool printed entirely in TPU 95A. Each of its three edges performs a different task and can be identified by its engraved label and unique…
Replacement lever for adjustable garden hose nozzle.
This will clip on a 34mm handlebar VERTICAL stem. the holes fit the 32 inches ozark trail bamboo skewers from walmart, just clip the pointy end. I extended mine a bit further as I'm taller than average. The forward angled stops the web…
I also used this model for the mounting bracket: https://www.thingiverse.com/thing:2850837 printed in too wet ABS, with still some red PLA in the nozzle lol. as long as it's functional! and I'll experience that very soon :)
I resized the original model so it doesn’t collide with the Z‑axis bed supports. (Note: the bed will still crash at its maximum extension, so remove the mod if you plan to print at full height.) I also added holes for 8×3 mm magnets.…
The Poop Scoop Sweeper Head is a replacement "broom"/scraper thing for the no-name Amazon Poop Scoop Sweeper my parents use to clean up after the dogs in the backyard. The original metal sweeper head is riveted together out of thin…
The handle which comes with the Bissell floor sweeper is pretty crappy. The joints don't stay screwed together well, even with loctite and strong tape. I broke a snow shovel this winter and had the idea to use its handle with the Bissell…
DOOR BOTTOM SEAL, just like the tittle says IMPORTANTMUST BE PRINTED IN TPU OR OTHER FLEXIBLE FILAMENT Wide bottom offers high surface area for tight sealing against rain, wind, and drafts. should fit any standard door about 48mm thick.…
INTRO The SweetGum Sweeper was my solution to not only cleaning the yard, but reusing leftover (new) Prusament spools. Other companies in the market for designs like this are charging over $400 USD and I wanted to change that. Thanks to…
Master Cooler Radar Cover – Futuristic 3D Printed Mod Give your setup a bold, high-tech upgrade with this custom-designed Master Cooler cover featuring a functional, radar-inspired aesthetic. This model transforms a standard cooling unit…
A spherical planter, perfect for indoor plants. The model features a modern design with sweeping lines that create subtle light and shadow effects. It's excellent for small plants or herbs and adds a unique touch to any room. I've also…
( Please suggest in comment a better title, summary and description , had hard time to explain it. I will update this product infos with your suggestions.) On the picture I finger point the 3D Model. details: Suitable for various…
Sweeping 2-line name plate Like And Subscribe with paly button and thumbs up emoji. Good for Youtubers Please shear your Print
Small name plate for any Ms. Martinez. If you'd like one made under a different name feel free to leave a comment. I personally used tree supports when printing for the floating dot in the letter “I”.
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=3045130 Print instructions Category: Office Instructions Using the following options:…
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=3045130 Print instructions Category: Office Instructions Using the following options:…
Cobra Kai - Sweep the Leg No Mercy, License Plate Frame, Karate Kid Category: Signs & Logos
Middle plate used for the Ferris Sweep. No special instructions for printing.
Vacuum. Attachment for floor sweeping, no glue needed. Made for easy cleaning as it snap together. Made for small shop vacuum. Life is better when we work together. Thank You PRUSA.
I needed to clean ("sweep") my chimney, and when I saw the retail brushes, I knew I could design one too easily myself! (See last picture for sample product I found on Amazon .) This brush head requires a few “post production”…
A Chimney Sweep Brush to be used as a prop. Print using 0.2 resolution. No supports are needed, utilises bridging to create the bristles. Once printed carefully cut off the supporting rim with snips or scissors.
First submission for the 2024 3D Printing Industry Awards! Arched Sweeps
This is a reverse engineered bushing for a SteppIR antenna. SteppIR calls it a Sweep Diverter. Because the thickness of the paint over the fiberglass rods can be inconsistent the printer is encouraged to print one and dry fit it. I had to…
A case with thin walls for the Ferris Sweep. I wanted to make it with a minimal footprint as much as I could.
Three part wireless Sweep Bling LP case inspired by geist's TOTEM . Without any bumpons attached the case retains the same overall height as a naked PCB build. The case is split into three pieces: a top part, a switch plate and a bottom…
I designed and built this magnetic sweeper to tackle the disturbing amount of old nails and screws scattered around my backyard and house. After collecting several pounds by hand, just by walking around and looking, I turned it into a…
CAD Exercise for sweeping a complex profile on a path that follows a non-planer surface Inspired by this question: https://www.reddit.com/r/Fusion360/comments/1hnbmn6/im_new_to_this_and_trying_to_figure_out_how_to/
################### New version that doesn't require the Wuerth adapter: https://www.printables.com/model/1501286-wuerth-hose-adapter-for-shapeoko-5-pro-sweepy-v2 ################### Wuerth vaccum adapter for Shapeoko 5 Pro Sweepy V2…
This is a cover for the Ferris Sweep Bling LP (other Ferris Sweep variants might work too). It is inspired by this model: https://www.printables.com/model/709932-ferris-sweep-controller-cover The main difference being that this version…
Description This case is for Sweep Bling MX keyboard . Tested working for DSA and XDA keycap profile. BOM For the full build you'll need 8x M2: 6mm screws Building Instructions For the bottom part, you will need to print it bottom side…
Creating a sweeping text using Tindercad codeblocks with any text messages. It provides a GIF on how it was generated.
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=3045130 Instructions Using the following options: faces_segment = 6 textstring1 = KIERA…
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=3045130 Instructions Using the following options: faces_segment = 6 textstring1 = \"In God…
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=3045130 Instructions Using the following options: faces_segment = 6 textstring1 = I`m…
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=3045130 Instructions Using the following options: faces_segment = 6 textstring1 = BE CALM…
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=3045130 Instructions Using the following options: faces_segment = 10 textstring1 =…
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=3045130 Instructions Using the following options: faces_segment = 6 textstring1 =…
If you sweep a profile that's “bigger” than radius of corners, you will get an error. It is possible to get what you would expect sweep to do using pipe or extrude combined with revolve or loft. This CAD model shows the technique.
Hi there! This case allows you to transport your Ferris Sweep keyboard. It fits perfectly my Ferris Sweep Bling LP, equiped with the nice case of @prolucker23 . If you prefer a thinner (but longer) case, check my other travel case design…
A lot of crafts create dust or other mess that needs to be vacuumed or swept up. I wanted an easy way to keep my desk tidy by having an integrated solution that makes clean up quick! It was very important to keep any elements of the…
This will only fit the Ferris Sweep sold by mechboards.co.uk https://github.com/mechboardsguides/mbuk-ferris-sweep-readme since this model has a different screw spacing than normal
removable travel case ring for the model https://www.printables.com/model/1190552-ferris-sweep-case
12 degrees tenting ring for the ferris sweep case model https://www.printables.com/model/1190552-ferris-sweep-case
Print on the flat back side, no supports needed. If you are going to slide the brush in, PLA will work fine. If you are going to try and snap it in, PETG might work better.
Based on the 2002 Xbox game by the same name. This model was ripped from the game by someone else, then posed by me to give him some attitude. added: separate models for head and body Don't forget to add supports!
A replacement for the failing point of the Scotts Lawn Sweeper. Got this lawn sweeper as a gift and it was just useful enough to keep around. Only problem was that the connector piece of the leaf collector broke almost immediately. For a…
This 3d print allows you to purchase the following camera and attach it to SnapLok chimney sweep rods for chimney sweep flue inspections. Requires a grub screw to hold camera tight.
Widened the USB C port hole (modded type c variants) Blocked the trrs jack hole (wireless variant) Added holes for tenting to the bottom plates.
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3045130 Instructions Using the following options: faces_segment = 6 textstring1 = Dr.Taly…
New connector for a shark sweeper, with a 2 piece, or just the connector for future use
Heres a spacer/extender I made for my Shapeoko 5 pro's dust boot. I have a few cutters that are too long for the boot to effectively collect the dust. Because of the two part magnetic assembly of the Sweepy 2.0, it makes it very simple to…
