Bissell Sweeper Snow Shovel Handle Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter so you can use a snow shovel handle instead of the crappy handle which comes with the Bissell sweeper.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
The handle which comes with the Bissell floor sweeper is pretty crappy. The joints don't stay screwed together well, even with loctite and strong tape. I broke a snow shovel this winter and had the idea to use its handle with the Bissell floor sweeper and designed an insert which screws onto the metal screw attached to the sweeper head and fits inside the snow shovel handle. I used the self-tapping screws which had attached the snow shovel handle to the broken snow shovel blade to attach the insert to the handle. It seems very sturdy.
I printed it with 7 walls, top surfaces and bottom surfaces and 50% infill. It should be super sturdy but if it wears out, I'll print a new one.
Note that the insert is very tight when screwing it onto the sweeper head. This is intentional since this is not locking mechanism.
I've included both the insert I used but also the nut which I created and fused into the insert so if you have a different kind of handle, you can design your own attachment.
I used this thread generator on MakerWorld to create the nut: https://makerworld.com/en/models/1073355-thread-generator-parametric-threaded-rods-nuts#profileId-1063707
I'm afraid that I can't remember the parameters of the thread pitch.