Liczymy pasujące modele…
The original version of this model was uploaded by gawdzilla on Thingiverse. I extended the model, added spaces for 2 more accessories, and relocated the screw holes. Really helps clean up the closet shelves!
Orient w/ open halves on build plate and longest portions sticking up Post-Printing Use super glue (optional) to form a single piece then align horizontal tab to left and twist right to lock into place. How I Designed This Used calipers…
Remix of holder for an extra cleaning head attachment used with the various Bissell spot cleaners like the: SpotClean Pro LittleGreen Pro LittleGreen Pet Pro SpotClean Pro; and SpotClean Pet Pro These all appear to be the same machine and…
My son really loves roombas and I haven't found any real toys out there so I decided to make them with him. There's a whole series on here that you can print. People have put these on birthday cakes, they've printed them to be massive or…
Just a repost of original part. I have use it for my Little Green® ProHeat
This remix increases the opening for cord pass-thru since my power cord didn't fit in the original. It also adds a hole for an M3 set screw. You'll need to download the wall-mounted dock from the original in addition to using the plug…
The handle which comes with the Bissell floor sweeper is pretty crappy. The joints don't stay screwed together well, even with loctite and strong tape. I broke a snow shovel this winter and had the idea to use its handle with the Bissell…
Use 2x M3 bolts to capture charger with 5mm thick tab. I created this around the battery for the bissell prolite stick vacuum with the detachable battery. Not sure what other vacuums this works with.
These wall mount takes 2 screws and has a built in cable management slot for the charge cable. It's a not quite a perfect drop it in from any angle design, but it slides right on the charge cable easily as long as you drop it straight…
Provided only with the "plus" models, the HydroRinse allow to clean the hose after usage. This is a remix of an existing model to add an hose mount. https://www.thingiverse.com/thing:5920816
Accessory for the Bissell portable carpet cleaner with steam. Caps the end of the hose and allows you to steam the inside of the hose and collection bucket for cleaning after use. Printed in ABS, hoping it will stand up to the temperature.
Adapter to allow use of Bissel PowerForce attachments on Milwaukee M18 Vacuum
I designed this to be a replacement for the Bissell Handheld Vacuum's OEM #1614210. Printed on default settings on a Bambu P1S. No supports when printing vertically, but kept the auto generated brim.
Remix of the strain trapper holder for the Bissell Little Green to include a rib so it will hold accessories like the crevice tool.
We have many, many more attachments that fit generic 1.25 inch round vacuum wands/hoses than we do the Bissell Pet Hair Eraser so my roommate requested an adapter similar to what's available for Dyson handhelds that would allow us to use…
This thing is a wall mount for a Bissell Pet Stain Eraser (model 2054). Strangely, Bissell doesn't seem to have one available. Note: This version has small changes from the last one I printed. I added screwdriver access holes and fixed…
Bissell power head latch replacement Recommended Print Settings: PETG 0.15mm layer height Lots of walls and 100% infill Supports only on inside “donut”
I have a Bissell ProHeat 2x Revolution Pet Pro Carpet cleaner. I was experiencing water leaks from where the hose attachment connects to the machine. I looked at the hose attachment closely and the red silicone o-rings that seal the water…
This is a replacement part I designed for a friends Bissell Green Machine. I made it a while back and asked him recently if it has held up. He says it's working just fine.
The crevice tool holder clips on the “stick” part of the vacuum. Print with Vertical Shells Perimeters (Wall Line Count in Cura) value of 6 to create thick, strong walls for the clip. I used generic PLA+ filament with a brim. To use, make…
I think the model name says it all just snap it on and slide the attachment in and you're done.
A ring connector for BISSELL Powerclean Drum Vacuum Wet and Dry (2026E) brush head, mine worked after little pressure, if it does not fit print in 95%. i used Kingroon PLA.
Recomended to print with PETG and 5+ walls and top/bottom layers. IF you are having issues with it not inserting properly, make sure the fresh water O-Rings are lightly lubed with chap stick or something else similarly non reactive with…
Two of my Bissell Smart Clean vacuums were missing the spring loaded bushings that keep the roller brush in place. This plate is attached with double sided tape and keeps the brush from falling out.
Lost mine for my vaccume, designed 3d printed this up and it was a tight fit, but fit well. Designed to slide over hose.
Fits this vacuum Bissell, 1782 Pet Hair Eraser Cordless Hand and Car Vacuum The accessory parts are printed separately and need to be assembled with hardware. Needed Hardware 4x #6 screws to mount the wall 6x m3 nuts 3x m3x16(or just go…
Just a handy spot to clip one of the nozzles to the vacuum's tube. The wall mount only holds 2 of the three provided attachments so I just keep one on the vac. Prints fine without supports. The nozzle attachment is pretty specific to this…
If you have a broken Dustbin latch/catch on your vacuum, I modeled this to be a direct drop-in replacement that works even better and is more reliable. Printed on Prusa MK4S w/MMU3 in Polymaker PolyLite ASA. Print on it's side with the…
I broke the original using the cables as a handle while carrying on my walking stick. My first Purchase was the wrong one and after hours of searching decided i would try and make one.…
Print as a replacement for the power switch pedal on Bissell vacuum cleaners. Minimal support and no post-processing.
Two of my family members wanted the drying rack for their Bissell Crosswave parts, but neither one wanted to mount the wall. I redrew the holder from scratch and integrated a stand that just slides together. There is a 0.1mm gap on the…
This is a slide on sleeve for the Bissel steam mop. As the handle screws have broken off due to brittle plastic inside. The top handle assembly has become loose and wobbly. I designed this so that it slides on the middle stem with the…
This is a replacement button for the Bissell steam mop main unit. In my case the button handles that hold on to the main steam body broke off due to usage. This was modeled closely to the original button. Instructions: Print in PETG or…
Why? I needed to clean heating radiators inside my apartment building. I have a cheaper Bissell PowerForce vacuum that came with ridiculously small crevice tool, so it was almost impossible to reach the insides of radiator. I decided to…
We recently got a Bissel Little Green Mini portable carpet cleaner, however it has a pretty annoying design flaw. The reservoir needs to be taken out of the machine and turned upside down to be filled, and the “top” (bottom) of the…
Bissell PowerGlide Pet - Handle Release Modified stem handle latch release for strength in 3D printed part. Using an M3 nut and bolt for the pivot points. This in my opinion adds strength to the handle release assembly, and withstands the…
Remix of holder for an extra cleaning head attachment used with the various Bissell spot cleaners like the: SpotClean Pro LittleGreen Pro LittleGreen Pet Pro SpotClean Pro; and SpotClean Pet Pro These all appear to be the same machine and…
My son really loves roombas and I haven't found any real toys out there so I decided to make them with him. There's a whole series on here that you can print. People have put these on birthday cakes, they've printed them to be massive or…
Just a repost of original part. I have use it for my Little Green® ProHeat
Modeled and printed this to replace a split drive gear in my Pet TurboEraser tool. I printed out of PET-G with a 0.2mm nozzle, at 0.1mm layer height.
Designed off a broken piece, not exact fit, had to sand it down to make it fit. Found easiest to print with supports on bed only with the roundish part on the bed.
This remix increases the opening for cord pass-thru since my power cord didn't fit in the original. It also adds a hole for an M3 set screw. You'll need to download the wall-mounted dock from the original in addition to using the plug…
The handle which comes with the Bissell floor sweeper is pretty crappy. The joints don't stay screwed together well, even with loctite and strong tape. I broke a snow shovel this winter and had the idea to use its handle with the Bissell…
Use 2x M3 bolts to capture charger with 5mm thick tab. I created this around the battery for the bissell prolite stick vacuum with the detachable battery. Not sure what other vacuums this works with.
Make sure to use supports and a brim. Your slicer's auto orient should correctly place it with the large wedge face-down on the build plate. I used PLA but PETG may be better for more longevity. Reuses the spring from the original part…
These wall mount takes 2 screws and has a built in cable management slot for the charge cable. It's a not quite a perfect drop it in from any angle design, but it slides right on the charge cable easily as long as you drop it straight…
Got a new vacuum, but the power cord enters at the bottom, which means if you drop the cord, you have to go all the way to the floor to grab it up again, which can happen many times during a vacuum cleaning session. This cord keeper will…
Lancia per aspirapolvere Bissell pet hair eraser Materiale: PLA Perimetro: 4
We have a malamute and the stock roller would get plugged very quickly. I designed this to use wiper blades to stop the roller from getting plugged. Different wiper blades have different lengths if they are too long they will hit the…
The Bissell Pet Hair Eraser is a corded hand vacuum with limited mobility but a lot of suction power. The suction is great for pet hair, but the side exhaust is so strong it creates extra work. The exhaust is Blowing in all directions…
The Bissell Pet Hair Eraser is a corded hand vacuum with limited mobility but a lot of suction power. The suction is great for pet hair, but the side exhaust is so strong it creates extra work. The exhaust is Blowing in all directions…
I lost all my attachments for my Bissell vacuum and the hole is a female 35mm. So normal 35mm tools don't work. I made an adapter so other vacuum attachments will work or I can print my own. Works great Print Settings Printer Brand:…
This is rather specific but maybe someone else can use. My new Bissell 3194 Little Green Pro cleaner came with two brushes but nowhere to store the 2nd one. I know myself and knew I would lose it quickly, so I fired up TinkerCAD and…
Based on Todd D´s design I Use CNC Kitchen inserts (short) https://www.prusa3d.com/product/threaded-inserts-m3-short-100-pcs/ 2 x M3 x 8mm
The Bissell Featherweight accessory holder is an easy way to store and transport an extra nozzle with your Featherweight vacuum cleaner. This convenient tool holder enables you to quickly and easily access the tools you need, instead of…
Our Bissell Hard Floor Expert Deluxe Canister Vacuum handle broke after a couple years. Designed this clip in Fusion to keep it together after superglue fix failed me. Print instructions Printed at .2 with a .6 nozzle. Would probably…
It is not always necessary to model and print the whole part, just fix it! This method should be applicable to many other similar repairs. This part fixes a common issue where cord hook clips break off. Instead of remodeling the entire…
Replacement pivot arm retainer parts for Bissell 1699 Proheat Clearview Powersteamer Carpet Cleaner. These retainer clips are components of the replacement part number B-555-9113. Included in the STL files are right and left parts when…
This is the cap for a Bissell Steam Mop Select Water Tank. Just re-use the rubber parts. I used Onyx410 for the print (needs to be water tight and resistant to being submerged in water. Not all resins do that).
This part fixes a Bissell cordless vacuum. My model is bolt pet # 1313T and this is the part which connects from the head to the power unit. I had some issues printing with pla and the part breaking when using the vacuum. I ended up…
This is a holder clip for the vacuum attachment for the Bissell featherweight. All units are in imperial. Category: Household
My Bissel Little Green (model 3353) steam cleaner came with optional accessories that did not have a storage location. Specifically the stain trapper tool. This model attaches to a slot on the hose storage bracket. I remixed the main part…
That clip? that keeps cords neatly coiled. Don't know what exactly it's called. No support needed.
For the Bissell Pet Hair Eraser 2390 Cordless Hand Vacuum: https://www.bissell.com/pet-hair-eraser-lithium-ion-cordless-pet-hand-vacuum-2390.html Model inspired by Etsy listing:…
Ready to slice and print with no adjustment needed afaik, but do you bb. Just ensure the clips get some good infill when slicing. This is the final version of a custom holder I made for the extra head that comes with the BISSELL®…
Bissell pet hair eraser charging station. Print instructions Category: Tool Holders & Boxes Summary Bissell pet hair eraser charging station. Print Settings Printer Brand: Prusa Printer: I3 MK3S </div> Rafts: No Supports: No </div>…
Redirects air from the Bissell vacuum backwards, so you don't blow away the stuff your trying to vacuum! Easily clips in and out of the fan grills. Print in the direction as seen in photos.
Years ago I had a Bissell vacuum that worked great, except fine animal hair would build up in the ends of the beater brush and friction would melt the bearing holder. The replacement part (203-2449) now costs $32 and is a whole assembly,…
Drafted in the finest of CAD programs, TinkerCAD (Which is why somehow the hole is slightly off center despite being aligned in TinkerCAD, I swear, still can't figure that out), this replacement cap for the Bissell 1867 Steam Mop is…
Wall bracket for the Bissell 29869 Mini Vacuum Printed in PETG with 15% infill, 3 walls.
Made to replace the broken release button on the vacuum debris container. Reuse original spring.
Scale up/down as needed! Simple replacement belt that interchanges with Bissel Part Number 3031120 that can be printed in TPE/TPU. This belt is a little thicker than the original, FreeCAD file included if you would like to adjust. Printed…
Wife was steam cleaning and she smacked the head of the steam cleaner against my desk. In doing so the clip broke that holds the head assembly onto the body. With it broken, it makes the steam cleaner basically INOP. The head will fall…
I designed this for a vacuum that was not made to stand up straight or lay down flat, yet remarkably didn't come with a stand or wall mount. The holder provides a good comfortable fit without very little wobble. The screw keyholes fit #8…
Made this small part to replace a broken bissell vacuum part. Not sure what part it is but i have the original part shown as an example. I made it stronger and printed with ABS at a 101% scale and it is exact. If I make more adjustments I…
I created this to replace the plug in a Bissell Steam Mop reservoir tank. Printed in TPU 95A, which is a little stiff, but works. Maybe a softer TPU would work better.
Bottom cord holder for Bissell vacuum. Not sure what all models this fits. I believe ours is a "Cleanview"
Prints without supports. Use any material with any infill as it doesn't really matter. With 20% gyroid infill it took me 2.5 hours to print.
If you own a vac mop cleaner for carpets or hardwood you know that drying the waste tank out helps keep it from getting funky. I recently purchased a Bissell Crosswave Pet Pro and wanted to keep it as fresh as possible by allowing the…
The hose on our Bissell Pet Hair Eraser split right where it joins the tank that holds the dirty bits. That meant no suction at the nozzle end unless I held the split hose by hand. Not so convenient as household work reducers go. I…
Replacement bottom ring cap for a Bissell ProHeat 2X Revolution dirty tank. A stand in for part # 1606415. Best to print in PETG or ABS
Removable nozzles for the Bizzel vacuum cleaner.
Designed this specifically for storing the vacuum head-up so the attachment can stay on.
As the vacuum itself is discontinued and this simple part costs $8 (not including shipping!) I took it upon myself to recreate the part via 3D printing. It's definitely a tight fit so it may take some pushing and very light prying of the…
The hose on my Bissell SpotClean Pro broke right at the wand fitting. The original fitting was glued with some kind of epoxy and was unusable. Remade the connector to the best of my abilities. Make sure to reuse the original oring. I…
Provided only with the "plus" models, the HydroRinse allow to clean the hose after usage. This is a remix of an existing model to add an hose mount. https://www.thingiverse.com/thing:5920816
This is specifically for the Bissell AirRam 19841 (shown in pictures 5 and 6). As far as I know, this is the exact same vacuum as the Gtech AirRAM 2, so it should also work. But I do not have that vacuum, so I cannot guarantee it will…
Intro Sometimes I lose track of the crevice tool so I created this simple one part snap on design. This could also work for other vacuum models if you have a tube that's 16mm in diameter, and a crevice tool that has a width and thickness…
I don't know the official name for this piece. It redirects the flow from the supply hose to the sprayer nozzle. My original part had the input nozzle break off. I figure it may be a common problem. This may be a a tricky part to print…
This latch broke on my vaccum and I didn't want to order a whole new neck for it (~$50) so I designed a replacement.
