1 / 3
Hose End repair for Bissell Vacuum Cleaner - EASY TPU — zdjęcie 1
1 / 3

Hose End repair for Bissell Vacuum Cleaner - EASY TPU

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The hose split right where it joins the tank.

Ocena
0 / 5
Polubienia
0
Pobrania
34
Wydruki
0
Wyświetlenia
517
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

The hose on our Bissell Pet Hair Eraser split right where it joins the tank that holds the dirty bits.  That meant no suction at the nozzle end unless I held the split hose by hand.  Not so convenient as household work reducers go.  I noticed that the part that held the hose (epoxied in of course) was a soft material and I was able to use a screwdriver to free it from it's hard plastic hose end flange.  After cutting the hose end clean again, I measured the old part, measured the hose end flange, and designed a part that would fit.  Printed it in FlexFill 98A because that's the hardest TPU that I have.

After it was printed, I removed the supports in the groove with my trusty needle nose plier (only stabbed myself in the finger one time).  Then I slid it back on the flange - perfect fit and it grips really tight just like it is supposed to.  Then I glued the hose into the new hose end part and let that set.  The vacuum is back in business.

How to print - A hard plastic won't work because you have to fit the hose end adapter over the flange that holds it.  Only a flexible filament will do.  The size is such that the grooves in the hose end part mate cleanly with the ridges on the flange.  All you have to do is wiggle it on and since the FlexFill 98a is soft-ish, it stretches just enough and voila - a working part.

Tagi