Bissell Crosswave Freestanding Part Drying Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Countertop drying rack for Crosswave canister and parts.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Two of my family members wanted the drying rack for their Bissell Crosswave parts, but neither one wanted to mount the wall. I redrew the holder from scratch and integrated a stand that just slides together. There is a 0.1mm gap on the dovetails on each side and in the radius of the cylinder, but that let me put it together without glue. Also, because it just slides together, it's reversible. I printed this in PETG on a 0.25 SPEED profile without supports on my Core ONE, and that was more than sufficient to hold all the Crosswave pieces. I’m happy to upload step files if desired.