DOOR BOTTOM SEAL / DOOR SWEEP
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DOOR BOTTOM SEAL/ SWEEp
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
DOOR BOTTOM SEAL, just like the tittle says
IMPORTANTMUST BE PRINTED IN TPU OR OTHER FLEXIBLE FILAMENT
Wide bottom offers high surface area for tight sealing against rain, wind, and drafts.
should fit any standard door about 48mm thick.
Should fill a gap between about 4 and 11mm wide.
Designed to take minimal filament for the task.
features reenforced screw holes to resist tear out.
there is a longer and shorter version to fit different widths of doors, should take about 4 pieces per door.
HIGHLY RECCOMENDED to print the sets, instead of the singles, the sets are specifically designed to support each other during printing to avoid the tall print being knocked over.
print, trim supports, and screw in place
NOTE - i don not have a good picture of the seal in use, so i just have a screen shot of the model..... but if you use clear/transparent TPU it will let light in ( this can be cool if wanted, if not use a solid color filament)