Liczymy pasujące modele…
I liked this command strip mount for the honeycomb wall , but I prefer that the command strips be mounted to the side of the wall (vertical) rather than the top (horizontal). Also, I use 4 wall segments in a grid, and needed a double…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
Scale Sized Bowling Pin Printing Instructions You can achieve the same print without a MM printer by using PrusaSlicer and adding filament changes on the Single model. See screenshot. Versions v2: Added unified stripe STL Reduced print…
Wydruk około 2,80 €–3,43 € nettoWstępna wycena jednego wariantu
Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)
Wydruk około 1,41 €–1,72 € nettoWstępna wycena jednego wariantu
Keyboard Wall Mount Hooks designed to be used with 3M Large Command Strips. Each design has a small lip around the command strip above and to the outside. Works great. Print instructions Printed on Prusa Mini with 0.2mm layer height and…
Wydruk około 2,53 €–3,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
All printable parts for your White LED Strip Add-on. You will also need Basic Board + PSU Add-on, which is shipped automatically with White LED Strip All of the add-ons and community models can be found here . Print instructions You have…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you're anything like me you bought a few wall hooks, used them once, and don't know what to do with all of the extra adhesive strips. This wall hook is designed to fit the small 3M Command strips and hide the pull tabs like the…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Stripe From Gremlins. With or without base.
Wydruk około 13,31 €–16,27 € nettoWstępna wycena jednego wariantu
Enlarged and modified version of @BobMcGlobus_870140 click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.) The original…
Wydruk około 0,97 €–1,18 € nettoWstępna wycena jednego wariantu
A remixed version of user @ianfolds double hook designed to work with the 3m command strip backing for direct attachment. Prints with PLA and no supports. gcode file from prusaslicer for a prusa mini+ and PLA included.
Wydruk około 2,13 €–2,60 € nettoWstępna wycena jednego wariantu
This is a remix of my own LED Strip Clip https://www.printables.com/model/68805-led-strip-clip This one allows you to mount two strips side by side with a single clip/screw. Great for the undeside of a lack table. Printing Print a few of…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Used: Voxalabs Aquila eSUN PLA+ Black 0.2mm layer height 25% infill, more the better really. Used ironing so get a smoother surface, but unsure if this is really needed.
Wydruk około 1,37 €–1,67 € nettoWstępna wycena jednego wariantu
This is a hook to hang a wall calendar on using a medium size command strip. The base is 55 x 16mm with a 4mm peg.
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
I saw some RGB-Stripe lamps and i wanted to create one on my own. So i tried it wth the Marvel-Logo and i think it looks great :) Total printing time approx 100h and 900g PLA. You can use any RGB-Stripe, i bought this:…
Wydruk około 19,47 €–23,79 € nettoWstępna wycena jednego wariantu
Thanks for the original model goes to @SickSadWorld_260233 This printed well for me in PETG at .20mm and 25% infill.
Wydruk około 2,25 €–2,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I couldn't find a wall hook I liked for download so I made one. This is based on a similar product that you can buy. I wanted one that could be printed on edge (for strength) without supports. It also needed to be low profile to sit…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
There were 4 extra strips in the container. Print off clips to get maximum usage. Link:…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I design this model so I could use 4 3M command strips to hang a IKEA Skådis board on my entry door. --- First, I want to thank @6d6178 for the excellent model description and dimensions on…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
NOTE: You find the new and improved version 2 here: https://www.printables.com/de/model/326872-air-traffic-controller-board-v2 Warning: The 60 degrees base seems to be misaligned, I'll remove this message when I've fixed this! Update…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
Adhesive nails compatible with tesa refill strips in various sizes. I print mine in 0.1mm layer height to get a nicer definition on the plate and hook. The model is parametric for use in openSCAD with clear parameters for changing various…
Wydruk około 0,26 €–0,31 € nettoWstępna wycena jednego wariantu
Wanted a Hook to hang my empty backpack on at work. Didn't want to put a hole in the wall. Thought I'd try to use 3M command strips. Wasn't sure if it would be strong enough, but so far, so good.
Wydruk około 2,07 €–2,53 € nettoWstępna wycena jednego wariantu
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Wydruk około 3,13 €–3,82 € nettoWstępna wycena jednego wariantu
Simple LED-Stripe Clip for LED-Stripe width 0,9 mm / height 0,5 mm
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
This diffuser is designed specifically for the 4pin WOWLed magnetic 30cm RGB light strips that you can get from amazon they come in a three pack with a three way adaptor. If you print these with a translucent white filament they diffuse…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
This is a temporary child safety lock that provides a more difficult locking solution, but provides the flexibility to leave open if desired. Print instructions The buckle should be printed vertically (on end) and then the other two parts…
Wydruk około 1,49 €–1,83 € nettoWstępna wycena jednego wariantu
Print optimized construction for a simple cell phone shelf that uses size Small Command Strips. NOTE 1: You will need to duplicate and modify the support in order to have both sides. A suggested print orientation file is included in the…
Wydruk około 5,41 €–6,61 € nettoWstępna wycena jednego wariantu
This bracket is designed to allow a nest temperature sensor to be seamlessly mounted to a wall with a “Mini” 3M Command Strip, while still being easy to remove the sensor for battery changes. Very useful for when you can't, or don't want…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This toothbrush holder attaches to your mirror, or other surface, with a 3M Command Strip. Uses the small 3M Command Strip (1.5cm x 4.6cm) It is in two parts to minimize stringing. The base has two variations, plain and smiley I have…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Prints cleanest on its side with paint on supports in the large holes.
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
I have a sheet holder on the right side and the LED stripe installed. Thus, created this remix which mounts on an additional vertical screw and is mirrored for left use. This remix is inspired by the LED stripe solution provided in this…
Wydruk około 9,62 €–11,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a standardized version of my LED diffuser I built for my enclosure using transparent PLA . It is 240mm long and has holes for M3 countersunk screws. It is for LED strips up to 10mm width. If you need another length just add a…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
Introducing the Pentagonal Flower Pot with Vertical Stripes, a piece that stands at the intersection of avant-garde design and horticultural practicality. This unique pot takes the timeless pentagonal shape and adds a layer of…
Wydruk około 18,68 €–22,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tidy desk, happy brain 🧠✨ This U-shaped holder lets you mount a power strip or similar rectangular item under a desk, on a wall, or inside a cabinet using two countersunk screws. The open top lips keep the strip securely in place while…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
My wife needed a hook, that was easily removeable again, for our Christmas decoration and since I couldn't find any useful design I just quickly made my own. Nothing special, quick and easy print, designed to be used with Tesa…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
Make sure you push in the two triangles close to the short end of the command strip first and tilt down towards the long end to snap into place. Compatable with all the channel models that David D has created. If you have any issues…
Wydruk około 0,30 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This diffuser is upgrade for ‘Sapphire Pro - LED Strip Holder for WS2812b’ This upgrade is easy to print, I used Devil Design transparent PET-G filament, maybe it work great with white filament YOU SHOULD TRY!
Wydruk około 3,39 €–4,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Since i just wanted to try make some vases i would love to get some feed back. Print is ment for prusa mini so if you have diffrent 3d printer you can adjust everything.
Wydruk około 17,05 €–20,84 € nettoWstępna wycena jednego wariantu
I have some old rollerblade rollers. on those i needed to change the buckle strap. But the strap is discontinued. So i maid one. Printed in pla, in extrem detail to have as much layer as possible to ensure the strengh. Unsaw the old…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
Introduction This is a complementary model to the LED Strip Holder for the LED controller of Huemihui LED Strips . Additional Parts Required M3x4 screws (e.g. M3x4 out of your Prusa Enclosure Kit) 2 regular M3 Hex Nuts (e.g. M3n out of…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introduction The motherboard I have does not come with an integrated addressable RGB LED (RGBA) controller, and I wanted one that I could control from the PC directly off of a spare USB header on the motherboard. My natural choice was…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dies ist eine einfache Halterung, mit der sich das Kabel einer LED-Lichtleiste entlang einer Fußleiste verlegen lässt. Das zweiadrige Kabel ist 1,8 mm hoch und 3,7 mm breit und lässt sich einfach befestigen. Durch die Lasche kann die…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printing I printed these in white PETG at 0.2 mm for both the mount and diffuser and it works great. The diffuser is printed flat, and it's thin enough to bend into the curve that's shown. I tried transparent PETG for the diffuser, but…
This is my approach for a mostly 3D-printed Wire Stripper — a functional and robust tool designed to strip wires cleanly and consistently. I wanted to create something that anyone can use, whether you’re a maker, hobbyist, or handling…
Update 9-11-2022: Added a version for 0.8mm nozzles. Tick marks of the old version didn't print correctly with a 0.8mm nozzle. Update 1-20-2022: Added a PDF file with a template, to write down the Live Z values used in the calibration.…
I have designed this profile for LED strips up to max 15mm wide. The beam angle is 45 degrees, making this profile perfect for indirect lighting. The fit is perfect and the diffuser snaps into place on the side without the need to use…
A small and minimalistic bracket for mounting one of my powerstrips. Same bracket will work for both sides. Update: 22.04.2023 - Added drawing with some dimentions. The powerstrip I'm using is a little bit ‘fat around the belly’ 🤭The…
Holder to fix velcro stripe or zip tie by screw or glue. usable for: velcro stripe / zip tie / cable tie width: 10 / 20 mm support: not needed (printed on side -> see picture) material: not defined (PETG/PLA used by me)…
Note: Must already have the new CFS firmware installed for the printer to use the new placement of the “napkin strip” (ver 2.3.5.xx). This mod serves 2 purposes: Takes out any guesswork for the correct placement of the nozzle…
Overview These label strips provide a place to attach a standard 12mm label (e.g. Brother label maker) to take your Packout organization game to the next level. Features Readable when the lid is open or closed Don't get in the road -…
Are your headphones sitting on the floor right now? Are they cluttering up your desk? Do you have too many headphones and don't know where to put them all? No more shall your headphones be treated with such disrespect! Treat them right…
Camo tiger stripe stencil that is heavily inspired by the one created by primary arms.
Welcome to the assembly Steps and thanks for your interest! I’m happy to announce that the assembly instructions are finally here. The assembly guide ''videos'' are ready, and you can now assemble your Wire Stripper Pro (…
Print with the back of the model on the build plate. I used supports on the strip cavity only. I printed with natural ASA, but any material should be fine. I included the .step and .f3d files in case you want to modify the hook for…
Hi there, this is a snap on two pieces wall hook Version 2 inspired by 3M command however following a no-support design. This one is designed to use with a 3M stick strip which can be bought separately. For those who likes the 3M stick…
Hallo zusammen, bei diesem Modell handelt es sich um einen Remix von einem Remix :-) Vielen Dank an Daniel und GamingFaxe!! Original: von Daniel…
I printed this in PETG and will see how long it lasts.
Overview This Philips Sonicare toothbrush holder is designed to allow toothbrush insertion from the top or side. This holder allows toothbrushes to be more easily stored higher on walls, far out of reach from splashing sink water, etc.…
A practical wire stripping tool for all common conductor cross-sections used with Wago 221 Series connectors – always with you as a compact keychain tool. The built-in measuring guide lets you identify your cable’s cross-section quickly…
Hi all, I'm just starting out with my 3D printer and this is my first contribution to Prusaprinters! I've really enjoyed printing the parts from here and learned a lot from you all, so I thought I'd add something I think is useful for the…
Landscape mount for HSW environment. Two choices, one for standard single use command strips and one for use of velcro command strips . Thanks to Spatula for the inspiration.
A simple mount for IKEA KOPPLA outlet power strips as shown in the pictures. Would perhaps also fit the newer model with non-illuminated switch or other brands. When attaching the power strip, slide it into the mount from the side. I…
This is USB cable organizer meant to be wall mounted. There are 3 versions which have different wall mounting options: The first is plain, and can be mounted with double sided tape. The 2nd design is for use with 3M command strips , it…
This is a simple bed leveling test to see if the whole bed is leveled and only prints in a few minutes. I would manually level my bed 4 times with the paper trick and then print this to double-check my leveling. I also used this print to…
This is something I did in Fusion 360 a few years ago during the 2020 shutdown. I originally printed this on my Airwolf Axiom machine and was never really happy with the print quality, but have been using it ever since and the…
Designed this headphone hanger that works with medium sized command strips. Print on its side, no supports needed. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 20% Filament: Prusament…
My little brother wanted a shelf next to the sink in the bathroom, but he didn't want to ask our parents for permission to drill holes in the walls, knowing they would most likely say no. So I designed this shelf to use the 0.75" x 3.65"…
I have seen several tri-color badges for sale online but I didn't like how expensive, flat, and non-customizable they were. Mine has some depth without being super bulky and you can pop them out to swap colors however you want. I also…
These files are intended for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. Category: 2D Art
Hey folks, here is an easy to print hook you can put on your wall and easily remove without any marks. It uses the great 3M Command Strips and costs less than $1 in filament. You can get Command Strips at Amazon-- about 50 cents apiece.…
I hung my honeycomb wall on a cement wall so i needed to use command strips around the entire thing. The original only worked on the top and bottom sides so i rotated the insert piece so that it would fit on the flatt(er) sides as well.
*Component Added - Clip with 11.5mm LED strip gap This is a newly created model for my enclosure to organize and clean up my enclosure wiring and led lights. The conduit can be printed in white to act as a diffuser over top of led strips.…
I didn't have mounting hardware, but an abundance of command strips, so this can be mounted to tile with 2 command strips toward the top. Should not require support. Just beware that adhesives like command strips tend to fail eventually…
Not easy to print nicely as it has no flat bottom surface. Print upright with support. I use also raft layers. Remark: this object is also the JSON Logo.
Living in a small space with many shoes? Put them on the wall with this shoe loop. This shoe storage is designed to be paired with command strips for wall mounting. You can also drill a hole through the mounting faces for a screw mount as…
This is a remix of the holder for Parkside magnetic tool strip . There are three different sizes of the strip. 20, 30 and 50 cm. Original design works with 20 and 50 cm but not with 30 cm version. This design can be used with all…
Wasn't particularly thrilled with most of the LED diffuser channel corners out there, so decided to create my own. These were designed to be as close to an exact fit as the end-caps that come with the channel, and as minimalistic as…
Remix of the original model to delete screw holes and add recess for Command 20 Lb XL Heavyweight Picture Hanging Strips. Turn on supports.
A simple to print yet very sturdy and reliable cable clip for cable management. Designed for Ikea Besta, Billy, and other 18mm wide, or wider, furniture, boards, etc. You can still add and remove everything without catching on the cable…
Hey Guys! This is a Led channel with a light diffuser, The led strip will slide into the channel, no need for glue! Then, the white diffuser will slide on top of the channel. I've made the files 200mm long and you can print multiple parts…
Description: I liked the magnetic rack design by RyanMulqueen for 0.2mL PCR strip which can be used in high or low position, so I reproduced the design with minor changes to fit my needs. Main modifications: Small reduction of the hole…
remixed Photogad's Wall Mail Holder for Letters / Envelopes to remove screw holes since we stuck our mail holder to the wall above our keys with a command strip. Category: Organization
ender 3 v2 PETG .2 20% infill PLA may work haven't tried
I needed a small hook to hang a clock to the wall, but could only find ones that required the wall to be drilled. This hook has been designed with a flat back to stick a 3M Command Strip to, and the round post allows things to be easily…
Both right and left Angled Valve Index Base Station Wall Mounts for use with 3M Large Command Strips. ( https://www.command.com/3M/en_US/command/products/~/Command-Large-Refill-Strips/?N=5924736+3294529207+3294773680&rt=rud ) to save from…
This is a simple but strong shelf that can be used to display a vinyl album with no visible mounting hardware and without needing to drill holes in your wall. This shelf is designed to use 3x poster size 3M Command Strips to mount…
The Helldivers Skull Patch with stripes. 2 version: a simple patch - for like adding to a costume or stuff. a modified version, with a hole-attachment - for wearing as a dogtag.
We keep breaking our command strip hooks at home so I made a compatible base and then decided to change the hook shape to hold my kids' headphones. I have also included a more or less direct replacement which is a bit stronger. Updated…
One of my power strips was wider than normal on the cable end. This design expands the cable opening to just above 3cm.
I have seen a few Command strip mounts, but I did not like how far away from the wall it put the honeycomb frame causing it to flex. I also wanted a way to secure it to the honeycomb frame. There are two mounts for the Medium size command…
Here is a simple shoe hook that mounts to the wall via a large picture hanging command strips. This should work with most low to mid top shoes.
Simple hook that uses a long 3M Command Strip. Easily holds up my heavy wool coat. Very shallow overhang, so you should be able to print with no supports. *** Added second model that is wider/more aesthetically pleasing + has a removable…
Remixed this awesome cable holder by Luki to a smaller size to hold my chonky cable from my Belkin power strip off the floor. I resized the design to fit my cable (should fit about 10mm diameter cable) and filled in the screw holes so I…
This is a hook for 3M Command adhesive strips. If you’re like me you have some extra strips laying around, I have a bag of extra strips. The backing is 75mm x 20mm. I used the large strips, the medium strips are the same width but…
This is a slim, low clearance LED strip holder for RGB/neopixel strips WITH the clear Silicone coating. I found a few diffusers that only fit the PCB strips, but were too small for the ribbons with the waterproof Silicone. Works well.…
I made this for a specific power strip from Harbor Freight (national chain of hardware stores selling cheap (read crappy) hardwares). It works for other small power strips I have. I made it to bolt my power strip to pegboard but you can…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Inspired by the Triple G Workshop 's Cube Background Panels…
I wasn't happy with the other command strip mounting options for opengrid, so I designed one that screws into the opengrid frame from behind. This means that there is a stronger mechanical connection between the grid and the mount itself.…
For holding down the ledstrip use something similar to this wonderfull model. Keep the rotation the same u can print them in batches of 4 as thats how many u need for one side. Step file included. Print Settings : Filament tested : I used…
I have downloaded this file, and it did not fit the Siboor led lights I had purchased, Since I printed them on ABS, as it shrinks by around .5% on this long piece it was 2mm too short, so it was remixed with those tolances in mind, and…
A recreation from scratch of @Hasanen's Multiboard/Underware Koppla power strip brackets , but instead of using push fit Snaps it uses Big Thread screws. I found that due to the weight of the power strip and attached power bricks and…
Designed for 60led/m ws2812b IP30 led strip (250mm section needed) To install, first solder 3 conductor cable to 250mm led strip (15 diodes), then remove top aluminium extrusion, insert the cover with the strip into the slot (its a tight…
![[v2 abailable!] ATC Flight Progress Strip System](https://media.printables.com/media/prints/57584/images/605984_6bf0de79-4719-4c62-8bae-7d132891ef8d/img_20210221_144815.jpg)
![[ REMIX ] Original Prusa Enclosure toolholder (LED stripe compatible, mirrored)](https://media.printables.com/media/prints/554974/images/4457989_f96586f8-1391-49f7-b657-7d8caab999ca/img_2848.jpg)
