Liczymy pasujące modele…
Don't you hate how round pots don't arrange nicely? Annoyed by the fact plants grow and need more space? Want to water multiple plants easily? Enter: A modular, scalable plant pot! Background: I designed these for growing VFTs because I…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Very stable Bitaxe stand with bottom pannel for the Noctua NF-A4x20 5V PWM. Print the stand upside down, no supports needed. To add: 4 Pan head screw M2.5*6 self tapping 4 felt pads 1.5x0.5 cm self sticking.
Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Wydruk około 2,07 €–2,53 € nettoWstępna wycena jednego wariantu
A quick and dirty designed cover for the rear right corner of the PrusaBox. This version comes with holes for cables. You need two 8 x 4 magnets. It looks like this on the left side: It is designed to use with my magnetic cable duct (see…
Wydruk około 0,89 €–1,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After coming across afri.mandjelikian great design for the Dewalt/Stanley/Craftsman TSTAK FATMAX Versastack Organizer Nested Cups , I needed one for storing various sized M3 Button Head Socket Bolts in. I decided it would be more…
This model is similar as HSW hexagonal baskets v2 , but it has full bottom. It is great for pencil holders. The walls of the basket are perforated with the same dimensions as the HSW basket. The walls are 4mm thick, except the back wall.…
A CFS stand with a bottom slide out to access the lower CFS unit easily when needed. ( 10 Print Files Total needed for this print). You will need bolts to attache the plates to the side walls(M4), just screw bolts into the holes, nuts not…
I created a remix for this project: https://www.printables.com/de/model/62043-rgb-double-helix-lamp-easyprint I have add a USB-Micro PCB Socket, because I wanted to save myself the cost of an extra power supply. You can buy the Sockets…
Larger spacing in the bottom so the device can be mounted screen top / ports bottom. Printed in PETG, holds the device really well.
These Bottom Modules are part of the Otto Starter modular ecosystem , designed to let you customize how your robot moves, interacts, and competes. The bottom section of Otto is where the action happens: wheels, sensors, bumpers, arms, and…
Background Information A fully customizable, parametric OpenSCAD remix of the popular SEELE DESIGN build tray. Easily adjust cell sizes, compartment counts, and wall heights to create the perfect stackable parts organizer or sorting tray…
I wanted to make a few cat feeders for the stray cats in my area so I removed the text and hollowed out bottom to make the print a little bit faster, also added an extended 200mm high version of the hopper.
Remade the FlashlightBottomCap since the file is not there for this. I am making this for Christmas, so I needed it :)
Scanned with Revopoint MetroX in laser mode
If you're sitting with the laptop on a comfy frizzy blanket you might be worried that it will inhale some of the fibers or that its air intake gets blocked. Likewise, when you have the laptop directly on your lap, you might feel your legs…
These are variations of the original Gridfinity Bins, with the following optimizations: Flat bottom Thinner bottom in order to maximize storage space and reduce infill waste Thinner walls (but still enough to ensure sturdiness Removed…
Replacement covers for Roto Centro 100 bottom pivot hinge of an old tilt and turn window (Internorm) Deutsch: Ersatzabdeckungen für das untere Ecklager von Roto Centro 100 Beschlägen eines alten Dreh-Kippfensters von Internorm Printing…
Magnetic clipping Doomcube V2 top/bottom panel attachment that allows for panel installation after frame assembly. STLs already in print orientation. there is a 3.25mm bridge for the upper clips but should not require supports. Uses 32…
Versión 2 del esquejero, esta vez con el fondo con agujeros para favorecer la circulación.
Tip: If it does not fit first try you can scale it in the slicer or carefully use a knife to fit it to size. Update: Improved the design and adjusted the tolerances
My tiny printer could not print the big top and bottom parts. So I just split them. Reducing the storage space in the top, but sticking to the concept of stabilizing everything with continuous threaded rods. The model can be printed with…
You can use a bobber to attach to your line while bottom-fishing a river or body of water. The bobber connects after you cast to indicate when a fish strike is happening visually. Bobber twitches with bites, drop if the fish is coming in…
+ longer body to ease the bending of cables. + guide to help bottom to stay in place. Assembly notes DO NOT remove red plastic protection of heatbed cables. Bend is longer so you won't wreck the cables. The rest is like…
Orient w/ open halves on build plate and longest portions sticking up Post-Printing Use super glue (optional) to form a single piece then align horizontal tab to left and twist right to lock into place. How I Designed This Used calipers…
Bottom Connector SMLIGHT SLZB-06 for Modular 10" Server Rack! - Mod10
I must have printed the original case 10 times but I could never get the clips to engage without snapping, I also had a small bulge in the centre of the remote but that could be due to my printer tolerances as the original doesn't give…
this model is not the design file by anycubic, it is reverse engineered, so slight dimensional differences may occure. reference this model with caution. do not print this. this is not meant to be a printable file
Extrutim https://www.printables.com/social/38556-extrutim/about https://www.printables.com/model/69934-helix-test-cube-filament-sample-xyz-calibration THIS DESIGN IS NOT ORIGINAL AND HAS BEEN MODIFIED FROM THE ORIGINAL. THE LICENSOR DOES…
This drawing can be used to cut a bottom panel that fits inside of a RatRig VCore3 500mm printer. This remix allows the installation of the panel without removing the three Z-Axis motors and mounts. The tolerances on this panel are very…
Bottom bumper for Source one frame by Team black sheep.
This is a heavy-duty handle for a Voron printer. These are attached at the bottom, making it easier to handle the heavy machine. In order to have one handle you will need to print both parts: Bottom handle Middle_Fan_Support (Handle…
Core One +/L variable Spool Holder for up to 2Kg spools. Thanks to vnb , providing the step file of his genuine extendable Spool Holder This remix can be used with the original O-ring, provided with the INDX upgrade or the USS Drybox.…
A remix of the SmartThings Hub (Gen2) Wall Mount - Ports on Bottom by neonpolaris. When I sliced the model in S3D it was two objects and the print would have been very weak structurally. I repaired the model so it is only one piece now.…
Bottom Plate for Align T-Rex 600 cfe helicopter. I Have done this model years ago. 1 to 1 detail. I can not confirm if it will fit as i don't own the real machine anymore. No supports needed. I have the whole rc 600 cfe modeled in CAD and…
Mosfet Din rail from https://www.printables.com/model/19385-din-rail-mounts/files PSU DIN Rail edit from https://www.printables.com/model/530181-rsp-500-din-rail-mount/files Wire pannel cover from…
Thinkpad T480s bottom case Still alot of work to be done. Free free to modify to your needs. Print out of ABS or PETG at least...PLA WILL warp after a few days use.
This is a bottom base to a hydroponic garden model I previously used.
This is a bottom panel for your Rook MK1 Printable in 4 pieces on the rook itself. The M3 screws to the skirts hold it in place, so you might want to get those as well. (they are not printable on the Rook MK1 yet, working on it) The M5…
Hold on the bottom of the cardboard insert. Separators for 3+ and 4 players tiles Print time is around 1h with default 0.4mm PLA profile https://boardgamegeek.com/boardgame/323613/luna-capital
Nothing special here just wanted to protect my new bottles a little and figured I would share the files.
Remixed the original to be a little bigger and with a solid bottom.
My mailbox accumulates water at the bottom when it rains or is humid outside, which will damage my mail. So I designed this grid to fit at the bottom of my mailbox that will raise the mail from the humidity. This is a customizable…
Glue top section onto this bottom section of the LEV50 cell. Dimensions are 99% accurate as of 9/15/24. The complete model can be used to help you mock up battery pack modifications.
Modular 10" Server Rack! - Mod10 Top / Bottom Connector Holed for cable manegment https://www.printables.com/model/1225
The first cup in a series of functional and personalized. It looks elegant and has a sturdy feel, depending on the filling.
This is the second version of the foot rest I created. I wanted something a bit more substantial than the source thing to keep my 2 year old's feet from getting stuck between the tire and fork. It worked okay with the foot rest mounted…
The scad uses BOSL2, it has a one line that should install it. I did modify the $fn of the thread to be smoother. Bottle has an od around 51/52/53 depending on where you measure it. I believe it is 53-SP400(M) bottle threads. I tried…
Print with 0.4mm nozzle, 0.2mm speed (or whatever profile your printer does), PLA and default settings (my printer is a Prusa XL 5T) Designed for Narex files and rasps with the handle ferrule at the bottom being 19mm at the bottom of the…
A remix of https://www.printables.com/model/252584-dodecahedron-lampshade
A 1x1x1 Multibin Insert with a 10 mm internal front fillet for easier scooping of content
Deck Post bottom bracket This deck post bottom bracket is to make decorative edge around new 6 x 6 deck posts, where it enters the stone patio. i did not want them out of wood, due to rot, etc. i designed them to have all rounded corners,…
this is a sword with a knife on the handle.
This is a Modular Bottom Plate as well as increased Optic for the Magpul PMAG 10 AK Gen2 that visually increases the 10 round Mag into a longer looking Magazine (for style points). Assembly: Insert 2 M3 Heat set inserts into the modular…
Replacing part for blinds. The original one was weak and snapped. Adjust width accordingly to your window size.
This case has an opening in the back to allow space for the pins for when using it without the flipper.
drinkMate 142L Gas Cylinder bottom https://twitter.com/Tiryoh/status/1410950747143823366 Category: Parts
I like the original storage tubes. I use them for both resistors and capacitors. However, I wanted them to be more portable. I did not change anything about the tubes and lids, only the tray. This tray is taller at 16.6mm and has 2 layers…
Replacement for broken suitcase feet/handle. Printed on .8mm nozzle with PETG. I did have to drill out the old rivets to remove the broken pieces that this replaces.
Nachmodellierung der original Grundplatte PV0075 Remodeling of the original PV0075 base plate
The original bottom cap broke due to tension from the normal twisting the top spout. I used TinkerCad to design and replace that bottom (black) piece. IF you increase it by 05% it will be a looser fit so that it will not keep tension on…
Orientated it correctly and fixed the bottom.
I remixed the “Blank bottom” plate and added a slot for both the Heltec T114 board with display as well as a slot for the gps module. I printed mine in ABS but forgot to snag a pic before assembly and weather sealing. The Any Panel…
Raspberry Pi din rail mount with usb pointing down for stability
Bottom connector remixed from: Allows a cable to pass through. The location where I want to put the rack doesn't have enough height to add feet. This change allows for clear cable run.
Introduction Hello, and thanks for looking at my model! I live own a three decker which means that even though I own my own home I also live in an apartment. This creates problems for hobbies like model making, scratch building and…
Coasters for everyday use. Model is in two parts which allows to print the bottom part in TPU for increased grip. The holder can hold up to four coasters. Materials & Print Settings It's highly recommend to print the top part in a high…
I recently purchased the Elegoo H1 HT to go along with my CC2. Unfortunately I ran in to an issue whereby when using the bottom outlet, the canvas unit could not pull the filament through. When using the top outlet, due to how I have…
I made this to replace lost plugs from my Flow Hive frames. Printed in PETG at 0.15mm it works fine. The ones I made have lasted a couple of years and look like they will last many more.
Bottom case for the DROK 200407 12V to 5V DC USB Buck Converter Dual USB Port Fast Charger Board with an integrated Synta/Vixen-style finder dovetail for mounting on a telescope. Reuse the hardware and top case that came with the product.…
This is a bottom panel for your Rook MK1 Printable in 4 pieces on the rook itself. The M3 screws to the skirts hold it in place, so you might want to get those as well. (they are not printable on the Rook MK1 yet, working on it) The M5…
I printed this pretty hot in PETG so it ended up shiny. I extended the lower buffer skirt and added a slot for a drawer to add desiccant/silica. 0.3mm Layer Height Perimeter min of 3 Avoid crossing Perimeters Solid layers Bottom 4 Fill…
Sandworm 3D printer - Chassis Bottom: Signpost: Main Scheme of Boards Drive Mount XY Axis Z Axis Chassis Top Chassis Middle Chassis Bottom Electronics Extruder Filament and Spool Levelup Addons PrusaSlicer Tools Bill of materials (BOM)…
The first cup in a series of functional and personalized. It looks elegant and has a sturdy feel, depending on the filling.
A simple finger safe guard for the square drive side of the launcher. Now I can trust my child wont get their fingers pinched. Solidworks model included so you can modify if you'd like.
Thanks for @WhiteCliffs_1358902 fantastic Death Star cover for Google Mini I re-mixed the base for wall mounting. Print as the original, I added supports on base-plate only orientated with the flat on the base. Nod to @ThijsMang_316301…
When jumping with the Arrma Typhon Grom the bottom hits to ground, causing some severe use and tear. These pieces are to be mounted on the bottom front and rear, over the existing piece. Just undo the 4 screws and mount this with them.…
This is a poopy bag dispenser for Flexi retractable dog leads. This unit mounts to the accessory slot below the handle. Interior dimensions are 2.5" long by 1.5" diameter. This has only been tested on the Flexi New Classic corded "S" size…
Espresso Puck Prep Station to both level and elevate a Rancilio Silvia Bottomless Portafilter https://amzn.to/4hn7AzP . Modular 2-part print (separate leveler and riser) Leveler levels and stabilizes the naked portafilter so it's…
Lego Duplo kompatibler Bodenverschluss für Duplosteine 0,8 mm hoch. --------------------------------------------------------- Lego Duplo compatible end closure for Duplo bricks. 0.8 mm height.
Lego Duplo kompatibler Bodenverschluss für Duplosteine 0,8 mm hoch. --------------------------------------------------------- Lego Duplo compatible end closure for Duplo bricks. 0.8 mm height.
Lego Duplo kompatibler Bodenverschluss für Duplosteine 0,8 mm hoch. --------------------------------------------------------- Lego Duplo compatible end closure for Duplo bricks. 0.8 mm height.
Can be printed with any material. Upper mount separated for simpler printing process with less supports. Mount ring ment to be glued to the top.
This part aims explicitly at vibration noise damping of the printers bottom plate in a very primitive fashion - by pressing the plate upwards from the outside. In my case a damper between 24mm (minimal) and 25mm (best) does the job. A…
Simple almost sphere shaped bowl with a flat bottom, can be used as a bowl with food safe materials or as a planter for trailing plants.
This is a game piece box with a sliding lid. There are design options for the box bottom and lid to have a mosaic pattern or solid surfaces, and flat or concave/recessed faces (on the lid). All of the lids will fit either of the box…
These Bottom Modules are part of the Otto Starter modular ecosystem , designed to let you customize how your robot moves, interacts, and competes. The bottom section of Otto is where the action happens: wheels, sensors, bumpers, arms, and…
Deck Post bottom bracket This deck post bottom bracket is to make decorative edge around new 6 x 6 deck posts, where it enters the stone patio. i did not want them out of wood, due to rot, etc. i designed them to have all rounded corners,…
Replacing part for blinds. The original one was weak and snapped. Adjust width accordingly to your window size.
Basce created for pi-hole In the future I will create and add the upper part of the case
Dimensions Size: 39x39x36.5 mm^3 Sphere diameter: 35 mm Covers 30 mm of the corner in all axis Print —Tested for Crealty K1 Max w/ standard 0.24mm profile— Filament: Generic ABS—For impact resistance ABS is superior to PLA. Layer Height:…
It includes an integrated hook for guiding or securing the control cord (nylon line). Designed for a snug fit and easy installation—no tools required.
This is a deeper tray that fits the bottom slot of the 3-part storage box. The cut-outs only make it fit the bottom-most position. It will not fit in another slot! I personally use it for tools and parts that I don't need that often. The…
This bracket allows you to mount a 2.5" drive where a 3.5" one normally goes. I'm using it inside a Fujitsu Esprimo E400 case but it's a standard part. It'll fit in many other cases. You'll need 8 screws; 4 to mount the bracket and 4 to…
This is a remix of the original snap fit case bottom as well as the version of the top made for the Armor Lite V5 heatsink. This remix is based on the V3.1 case. I printed this with Sunlu transparent PLA with the 0.25mm Structural…
Airpods pro bottom part of the case with circled form of the holes.
Some extra cooling for the board when too hot inside enclosure. I am using the enclosure Basic Board to power NF-A4x10 24V fan. Based on your power supply, any 4 x 4 x 1 cm fan should fit in. Slicer setting (default presets): Layer height…
Screw design to attach to the bottom of lightsabers purchased/assembled from Savi's workshop. Suggested use is to print two then soldering them together to create a double bladed lightsaber, if not then perhaps use a lighter to slightly…
LEGO®-compatible classic minifigure stand, designed for easy printing with no supports required. Good results with PLA, 100% infill for even texture, and top surface ironing for a smooth finish.
