The "5th leg" for K1C - anti-vibration TPU damper for the bottom plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Soft damper for preventing K1C bottom plate vibrations in a primitive way by placing it under the printer.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 489
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This part aims explicitly at vibration noise damping of the printers bottom plate in a very primitive fashion - by pressing the plate upwards from the outside.
In my case a damper between 24mm (minimal) and 25mm (best) does the job. A 26mm high damper (which would normally be much too high for this application) is provided for some special use cases only or just other purposes.
Printing TPU on a K1C can be tricky. As far as i know it works best if the spool gets positioned above the printer and the filament is being loaded directly into the extruder avoiding the bowden-tube. Also the volumetric speed has to be set to around 2.5mm³/second.
I have used an Ender3-type machine with a "sprite"-extruder for this task, TPU95A and a 0.4mm nozzle. The settings i have applied to get the right quality included:
at least 3 top and bottom layers
2 wall loops + Alternate extra wall
roughly 16% Gyroid infill (i guess this is the most important*)
0.24-0.28mm layer height to speed up the print
printing speed around 30mms,
nozzle temperature between middle and high range for a good adhesion between the layers
only minimal cooling (when printing only one single part cooling could be turned off completely)
This settings should make the damper soft and squishy, so it can also easily be pushed under the bottom edge of the printer frame with no need to lift it up.
Please make sure to position the damper near the center and away from the ventilation holes at the bottom of your printer.
Have a nice print!
ABOUT THIS PROJECT
This project was created with FreeCAD running on GNU/Linux. Thanks a lot to all Free Open Source Software volunteers, who made it all possible.
This model is licensed under GNU GPL v 3.0
Notes regarding the provided image:
In recognition of a great work done by other people and in case someone is interested in fonts/typography: the typeface used for captions in the provided picture belongs to Gillius ADF Font Family (GPL v.2.0 with font exception) from Arkandis project (https://arkandis.tuxfamily.org) and designer Hirwen Harendal, that in turn is based on “Gill Sans” font designed by Eric Gill in 1926 (https://en.wikipedia.org/wiki/Gill_Sans), which has its 100-years anniversary.
“gexographix” logo and company name are property of the author of this 3D model.