Liczymy pasujące modele…
This probably works better as a diffusor, than a Dampening Panel. I thought that it might trap sound in the small chamber. Cant test it for myself because my printer is slow af :( but Ill be happy if someone uploads a make :) The…
I have remixed the Bambulab model for the Prusa XL. You can simply put the shoes under the original ones. The assembly is very easy. You only need to lift the Prusa XL carefully. A nice side effect is that the PrusaXL stands a little…
##### Highly Experimental ##### This model is highly inspired by the sotar shock damping system . It works on the same principles. It allows the variant flow rates based on piston position. The model has parameters defined so you can…
MechSmith's Foot Mount works great to lock the feet into place. I however experimented with it a little bit and used Autodesk Fusion to turn it into a damper / absorber. This was originally meant for the FlashForge AD5X but it should work…
I designed these magnetically preloaded dampening springs to reduce vibration and improve stability in my washing machine. The system uses repelling permanent magnets embedded inside a solid 3D-printed housing to create a contactless…
Material: TPU/TPE. Number of perimeters: 1-3 (for TPU A95) or 2-4 (for softer filaments). For optimal performance, for the "Side feet" model, use 1-2 perimeters up to 18 mm height and 3-6 perimeters above 18 mm. Top layers: at least 5 (1…
Ender 3 V3 SE/KE Dampening Noise Reduction Anti-Vibration Feet - Remixed to fill in the gap on the bottom of the feet. May reduce Dampness but no supports needed.
Would recommend your own print settings. I printed these in tpu and they are made on and for my prusa mini+ howver im sure they could be useful with other printers i would recommend adjusting the infill to have 4 parts with the same…
This is a vibration-damping wall anchor for tables or storage racks. Printers like having a stable platform, and these anchors are a cheap way to add some rigid support. Print with tpu, with the side opening down, without supports. 4…
Blue Snowball Dampening Mount. The elastics are regular sized hair elastics I bought at the dollar store. Mounting Hardware for the stand can be attached via a M3 bold through the middle. The model consists of 3 pieces, outer ring, inner…
Vibration-dampening feet for the MK3/MK4 . Uses 4x double yellow dot squash balls. I wanted to make a version that does not add height to the printer to make it easier to fit into various enclosures. The design is inspired by several…
Important: Does NOT fit on Kobra 3 V2 !!! Wichtig: Passt NICHT am Kobra 3 V2 !!! Deutsche Beschreibung weiter unten. Version 2 is here! With different models for PLA and PETG! I couldn't find any dampening feet specifically for the Kobra…
Important: Does NOT fit on Kobra 3 V2 !!! Wichtig: Passt NICHT am Kobra 3 V2 !!! Deutsche Beschreibung weiter unten. Version 2 is here! With different models for PLA and PETG! I couldn't find any dampening feet specifically for the Kobra…
ASUSTOR AS5304T Vibration Dampening Feet These are vibration dampening feet for the ASUSTOR AS5304T NAS, that are printed in two parts using flexible filament. While the AS5304T NAS from ASUSTOR is a relatively quiet NAS when it comes to…
This design is specifically aimed at reducing vibrations on the Y-axis, particularly the bed, which carries the most inertia and tends to resonate at higher harmonic frequencies. In my tests using Klipper and an ADXL345 sensor, I've been…
Here's my proxy model for the Frosthaven Summons, the Dampening Unit! The artwork for this guy is at https://github.com/any2cards/frosthaven/blob/master/images/art/frosthaven/characters/summons/fh-summon-dampening-unit-front.png. As you…
Dampening feet that fit the Ender-3 V3 Plus feet (40mm round gum pads)
I'm just getting into car audio and decided to sound deaden my car. People keep recommending these rollers/brayers to help adhere the material properly so I decided to make one. Prints best at 0.2mm layer height. I printed it with 5 walls…
Worked with a friend to create custom feet for his Schiit Sol turntable. They are height adjustable, and vibration dampening. The original feet fit inside of the mod, so if you ever want to remove them or resell the turntable, you won't…
This probably works better as a diffusor, than a Dampening Panel. I thought that it might trap sound in the small chamber. Cant test it for myself because my printer is slow af :( but Ill be happy if someone uploads a make :) The…
Remove standard foot, Keep original screw, Fit top half of foot to the machine, Press in the bambu style dampening rubber, Press on bottom of foot. If everything printed correctly then it should fit tightly together and not fall apart if…
I have remixed the Bambulab model for the Prusa XL. You can simply put the shoes under the original ones. The assembly is very easy. You only need to lift the Prusa XL carefully. A nice side effect is that the PrusaXL stands a little…
A set of very simple TPU feet for the Fractal Design North, designed to (barely) fit over the stock feet, depending on your printer calibration it may need to be scaled up slightly, especially when using PETG or PLA. When using TPU print…
Vibration Isolation Dampening Feet There are two manufacturing options for producing these dampening feet: Direct 3D Printing – Utilize TPU or a similar elastomeric polymer. Mold and Cast – 3D print a mold and cast the feet using…
Since I liked the model by Extrutim really much, and wanted its effect for my MK4S, I made a similar model. As dampener I used the green ones by Polysound (I didn't test others), which are available on Amazon…
These are Sound dampening feet for your Core One. Originally designed by Prusa Guy, just shorter and with a cutout for the dampeners. Support is needed for the cutout. As a dampener I used these, but be aware, that the color indicates the…
##### Highly Experimental ##### This model is highly inspired by the sotar shock damping system . It works on the same principles. It allows the variant flow rates based on piston position. The model has parameters defined so you can…
Edit: Photos are now posted, and Mk2.5 is now confirmed to work. Edit 2: There are now files for clarinets with an 80 mm bell, but those have a tab on the side instead of a receiver for the threaded insert. This thing is a system designed…
I was running my printer on a piece of carpet to isolate vibration. I've been looking for a more permanent solution and saw that some people have used tennis balls with attachment mounts. I wanted something smaller and found these foam…
A vibration dampening foot for the MK4/MK4S frame. It is designed to go on the inside of the frame so that the MK4 toolbox (https://www.printables.com/model/508680-mk4-tool-box) can still fit on the outside. It is also designed to use a…
Initially i did not see the original versions with one leg removed, and for the Max it can not have the forth leg as the LAN port is in the way. After printing and removing one leg i found the fan vibration to be resonating really bad and…
Recently, I built the famous Sofle Keyboard (RGB PCB version in my case). I was trying to find even a simple case. I couldn't find anything that would satisfy my needs, since looks like many people design cases without using heat-set…
I was getting a lot of noise from my delta style 3D printer vibrating on top of my wooden workbench so I decided to mold some feet from a silicone recipe I found. I plan on filling the mold with the silicone and then use M4 socket head…
a small insert to help dampen vibration of Viair 380c compressor. Centre hole 3mm, washer needed to stop it from pulling out. tapered for snug fit, short base to minimise clearance height. printed in TPU 90 with 2 wall and 10% infill
Cups which allow Technic's turntable to sit on foam padding cleanly without leaving layers of padding on show. Just add foam as desired and you are good to go.
MechSmith's Foot Mount works great to lock the feet into place. I however experimented with it a little bit and used Autodesk Fusion to turn it into a damper / absorber. This was originally meant for the FlashForge AD5X but it should work…
I designed these magnetically preloaded dampening springs to reduce vibration and improve stability in my washing machine. The system uses repelling permanent magnets embedded inside a solid 3D-printed housing to create a contactless…
If you have ever mounted a bowden extruder directly to a 2020 aluminium profile you most likely know what resonance is :-) To avoid the annoying noise caused by resonance I created this mount which allows you do decouple your nema-17…
Material: TPU/TPE. Number of perimeters: 1-3 (for TPU A95) or 2-4 (for softer filaments). For optimal performance, for the "Side feet" model, use 1-2 perimeters up to 18 mm height and 3-6 perimeters above 18 mm. Top layers: at least 5 (1…
Ender 3 V3 SE/KE Dampening Noise Reduction Anti-Vibration Feet - Remixed to fill in the gap on the bottom of the feet. May reduce Dampness but no supports needed.
Would recommend your own print settings. I printed these in tpu and they are made on and for my prusa mini+ howver im sure they could be useful with other printers i would recommend adjusting the infill to have 4 parts with the same…
This is meant as a vibration dampening gasket that goes between an ATX PSU and the PC case. Print with low infill for extra squishiness. Openscad source included. Print Settings Resolution: .2 Infill: .2 Category: Computer
For best results, use low rebound squash balls (aka super slow balls) If you want dampening + no-slip , then do not print the bottom part (you have to use the split to object function anyway) Bottom part is only if you want it to be…
This is a vibration-damping wall anchor for tables or storage racks. Printers like having a stable platform, and these anchors are a cheap way to add some rigid support. Print with tpu, with the side opening down, without supports. 4…
Hey All. First Off, Thank you Prusa Team, for with out you this and many other things wouldn't have been possible. Second, Born out of Need for me and what I'm doing with the CO1L, So, bare with me, but i wanted to get these live before i…
I noticed that people were using foam, toilet paper, or adhesive putty to fill their spacebars and reduce the hollow sound. This inspired me to create a custom fitting inlay with TPU. Printed with Prusament TPU 95 Shore, but I believe you…
Made these for a used CURT 16900 5th Wheel trailer hitch that was missing its original sound dampening pads, this eliminates the 2mm gap between hitch and rails when towing. The pads fit snug between the hitch and rails eliminating…
I've designed improved feet for the DF54 grinder. The idea was initially inspired by the V-shaped silicone feet from a broken cutting board that I placed under my DF54. Silicone has excellent vibration-dampening properties, and those feet…
Ender 3 / Pro Dampening Feet for noise and vibration reduction I design this "spring like" foot to be attached on printer frame structure without modifications or need to remove the original rubber feet. You just need to print 4 of them…
I did not have anything to fabricate a better solution, so I came up with this. These won't wobble as some of the other printable ones, yet they nicely reduce vibrations transmitted to the surface the printer sits on. It should have a…
These are three designs for vibration dampening feet for 3D printers, incorporating standard 40mm squash balls. The models are designed for 3D printers that have 2020 or 2040 extruded aluminum frameworks (Ender 3, 5 10, etc.). The models…
This are for vibration dampening. You can mount them with adhesive tape on the back side of your flagstone or concrete slab. Settings: Infill: 30% Grid Supports: Yes Material: PETG / PLA Hint: print on the sqare side with supports
I had cut up a yoga mat as as dampers for my Ender 3, but after awhile I found that they were flattened. Not wanting to mess around anymore, I thought I'd do the foot thing right and did some research. I ended with the Sorbothane discs as…
An earplug with a hollow core torus that leads to the earpiece. There are little slits on the outside of the torus that allow sound through. dampening but not blocking it completely. Great to make white noise sounds like AC units and…
Tricopter Camera Vibration Dampening Mount. Using Piano Wire 1.5mm diameter. Also included plate for soft mount rubber dampeners used for flight controllers in combination with standoffs. This version is 10 grams lighter…
These feet use 50 durometer, 30 and 40mm half-spheres made out of the visco-elastic urethane rubber "Sorbothane" to reduce the amount of conducted vibrations by a lot, without the problems of self-induced oscillation of more springy…
A simple design of dampening feet for the Ender 3 and other printers that have the same frame style. This was printed in TPU at 15 mm/sec with a 0.3mm height and zero retraction. The nozzle temperature was 220 with the bed at 60. They…
Dampening feet for square cases, printers, machines etc.. Hull: The hull for the dampeners comes in two versions, normal and heavy duty. It fits on a 2020-frame, but can also be used on other materials. Dampeners: This thing is originally…
Vibration in your MK3S? Making your teeth ache and your head hurt? Found these dampening pads on Amazon. https://smile.amazon.com/dp/B08D9MDKD2?psc=1&ref=ppx_yo2ov_dt_b_product_details Designed a simple holder for them that attaches…
This are remixed (completely new designed, except the Dimension of the Rails) Anti-Vibration Feet to fit in larger Fans for the PSU and Motherboard. They feature different angles and Material strengths to eliminate different Vibration…
Follow the picture on how to assemble, it is pretty straight forward. Just use some 12mm M4 screws to hold them together. Category: 3D Printer Parts
I purchased a BLV enclosure kit (https://www.printables.com/model/73738-blv-enclosure-beta), but didn't want to leave my PSU and electronics inside, so designed a lasercut base for the enclosure to hold the PSU and electronics. It is…
I was using an older model of dampening feet that fit into the extruded aluminum frame of my ender 3, but they would slide up and down the frame. This model builds them into the endplate to keep them at the corners for better vibration…
You can place this pad underneath your speakers to reduce the transfer of vibrations. Note that this design won't help if you print it in rigid materials like PLA, ABS, etcetera. I printed it in ColorFabb nGen Flex, but any…
These are vibration dampening feet for the Prusa i3 MK3(S/S+), that mount directly to your printer without any modifications. You can leave the stock feet on, and slide these underneath your printer. As you can see in the image, there is…
Print from TPU. 15% gyroid infill worked well, feels slightly softer than original foot. Otherwise I just used the Generic TPU and 0.16mm Optimal profile. If you get stringing with TPU it's probably best to print sequentially instead of…
Ender 3 Dampening Feet for noise and vibration reduction. Remixed from rpanachi's Ender 3 Pro Dampening Feet (on Printables and Thingiverse ). I found that design fit great on Ender 3 Pro, which has 6mm thick rubber feet. However the…
This is a fairly simplistic fan holder for Noctua 40mm x 10mm Fans, including noise dampening. The fans are slightly pressed in the slots and make only contact with the rubber already integrated with the fan. It's designed to fit in the…
My 04' Rancilio Silvia's ULKA pump was getting pretty noisy. I opened it up and the vibration dampening holders of the pump were pretty saggy. I replaced them with these and the noisy reduction was quite obvious. Important: print it in a…
IMPORTANT NOTE! I designed this before getting a paver to rest my printer on, and found that with the paver this mod actually increased noise. This mod does definitely reduce noise if you're not using a paver, and just trying to dampen…
Bambu Lab P1P Anti-Vibration AMS Mounts Previously I had my AMS beside my P1P but changed my setup to where I needed to mount it on top, I printed the original mount kit from the Bambu Lab site and soon realised the noise resonating…
Thank you for your interest in my design! even though its simple and crude I feel it is very effective. please let me know your experience with it if you print and use! Updated! 5-20-22 Flush Top version, no supports needed! Original…
Here goes another cover for the original Prusa Enclosure. Wasn't happy with the existing ones, so I quickly sketched and printed this one. I wanted to add some insulation to dampen the microphone like panels. Instead of printing a TPU…
Simple feet for lack tables, using a press-fit solution for typical washing machine dampers. I got my rubber dampers from AliExpress.
Blue Snowball Dampening Mount. The elastics are regular sized hair elastics I bought at the dollar store. Mounting Hardware for the stand can be attached via a M3 bold through the middle. The model consists of 3 pieces, outer ring, inner…
A simple foot for the Bambu Labs X1C. Print the feet with TPU and little infill or use the mold and cheap (Bathroom) Silikon to create nice damping feet. Pictures of the final silikon feet will be added soon.
TPU foot for 3030 profile. Vibration dampening. Print Settings Printer: Hypercube Hevo Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.15 mm Infill: 33% Gyroid Filament: Generic TPU Notes: You can adjust the infill according…
Dampending feet for an Ender 3 that uses Nerf Rival balls. They slide onto the extrusion and have holes for securing with t-nuts. However, they usually don't require t-nuts since they are a secure fit already. I just used CA Glue to keep…
Two variations on a theme - both parts can be used interchangeably depending on your preference and to what you're attaching them. Print two parts and capture a squash ball between them to absorb vibration from one side. I use these to…
This is a GPU Stabilizer in vertical orientation, designed to be put between the GPU and the case. The total height is changeable via a parameter in Fusion360. It consists of three parts, with the stand itself preferrably be printed in…
A simple 3x3 module tile for the CoolerMaster Qube 500 side panels. To help mask some of the fan noise that may happen inside a PC. You may need to print multiple of these to cover the area you need. The inside has a dense come pattern to…
Since the Prusa XL with its quite hard feet transmits vibrations and noise to the ground, I have made a foot which reduces the vibrations through foam pads for speakers and thus makes the printer much quieter. You need a total of 6 pads ,…
The levelling feet can be used with https://www.thingiverse.com/thing:3316671 I have also designed a foot which doesn't have the small holes for the dampeners if you just want them on their own Print Settings Printer Brand: Creality…
Vibration-dampening feet for the MK3/MK4 . Uses 4x double yellow dot squash balls. I wanted to make a version that does not add height to the printer to make it easier to fit into various enclosures. The design is inspired by several…
These feet are designed to mount a self-adhesive, dampening foot to the printer. I've gone with some 1.5" Hemispherical Sorbothane feet from Isolate-it , but you can use anything you'd like. Remove the existing feet, leaving the extrusion…
These feet attach to the 30x30 extrusion and are held in place with M6 x 10mm hex head cap screws. The vibration dampening is done by these 1 ½ inch Vibration Isolation Washer Rubber Isolation Pads:…
Hello, I had to make more room under my ender 3 pro, and had some foam pads laying around for dampening washing machines. I couldnt find a model which support that, so I made my own simpel model. The only requirements being that it had…
These sound dampening feet slip over the Prusa XL's feet and are sized for 1.5" x 0.5" Sorbothane Discs. The 50 duro pads I chose were rated for 10-23 lbs / 4.54-10.43 kg per pad. The XL weighs somewhere between 25 and 35 kg. I plan on…
Quite a fast print, low material usage, stock screws fit perfectly. I tried multiple shapes for the fan shroud and found the one used in this design to be the most effective whilst maintaining good airflow (I managed to get a quieter…
My Synology NAS was making too much noise from vibrations so I remixed a Bambu Lab vibration dampening foot to work with the large Synologies. I printed in 95a TPU, but PETG could be a viable alternative as well if printed without the…
Hi originally made this for the fan that cools the motherboard of my anycubic predator but i guess u can use it for all surface mount fans. just print it one or two times depending on the way you mount your fans. Its meant to be printed…
Really simple solution for a really annoying problem. I wonder why Wesco doesn't supply something like this by default with its trash cans. The inserts out of sheet metal sit directly on the ground, thus making a horrible noise whenever…
When printer my ToolChanger made a lot of noise. It turned out to be coming from the PSU (see video.) I made this vibration dampening mounts for the PSU to make it silent again. I printed the dampener parts (A & B) with NinjaFlex, 0.2 mm…
Hi there! this is my attempt at creating some vibration dampening feet for my ender 3 pro, but this will work with any printer frame that uses 4040 or 4020 extrusions as frames. This design uses small 31mm (diameter) bouncy balls that we…
I found my Prusa XL to be a little bit on the noisy end, and parts of the noise I attributed to resonance coming from the side panels. Ordered some 2mm (80mil) sound deadening mat from Amazon, and cut them to size using this template.
