Prusa MK3/S/+ Dampening feet NEW VERSION
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another vibration reduction feet for the Prusa MK3/S/+
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 88
- Wydruki
- 2
- Wyświetlenia
- 483
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I did not have anything to fabricate a better solution, so I came up with this. These won't wobble as some of the other printable ones, yet they nicely reduce vibrations transmitted to the surface the printer sits on.
It should have a tight enough fit to not fall off on their own, but you can still glue them on or whatever your heart desires. It is 10mm wide, I found that to be enough, but it is easily editable in slicer by changing the Z scale. They make the printer about 15mm higher than the stock rubber feet.
Print it only at .2 mm with PETG, when printed with a bigger layer height, because of its extrusion width, some of the walls get cut in half or completely removed.
UPDATE: Same thing, but snaps onto the extrusions and fits better. Download the UPDATED_Feet.stl