Foam supported dampening feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've created dampening feet for my printer (Metamaquina 2) to reduce its noise and reduce vibrations. I believe that…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I've created dampening feet for my printer (Metamaquina 2) to reduce its noise and reduce vibrations.
I believe that the machine works better if its frame is able to move a little bit, reducing the stress on the structure while printing (kinda like earthquake resistant buildings).
Instructions
I've used a soft foam that is able to hold the weight of the printer on it's four feet without much compression. The foam is about 2 cm thick (3/4") and 3.8 x 3.8 cm. You'll need four pieces.
Print the superior part with supports.
Category: 3D Printer Parts