IKEA SIDORNA noise dampening wall angled connectors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Angled connectors for SIDORNA silent walls
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 318
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SIDORNA walls are delivered with straight connectors if you want to build a longer wall with them, but if you need to go at an angle there is nothing offered.
This replicates the original connector bars, but with adjustable angles.
The stl and 3mf use the 40 degree variant, but I provided my blender file where you can make any angle you wish.
Copy+paste the straight bar, go to edit mode with the new object, select half the mesh inluding the middle seam and use the spin tool to create the angle you need.
The blend file also has 35 and 45 degree versions already in which you can select and export as stl.
If you print this using Marble PLA or Marble PETG it will match the walls perfectly.
Print laying on it's back, no supports required. Use min 20% infill.
I used JAYO PLA marble.