1 / 3
Vibration-dampening feet for a floor fan — zdjęcie 1
1 / 3

Vibration-dampening feet for a floor fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed for a 40 cm diameter fan with a U-shaped metal pipe stand. Will likely fit other fans with a similar stand.

Ocena
5 / 5
Polubienia
3
Pobrania
7
Wydruki
1
Wyświetlenia
48
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Material: TPU/TPE.

Number of perimeters: 1-3 (for TPU A95) or 2-4 (for softer filaments). For optimal performance, for the "Side feet" model, use 1-2 perimeters up to 18 mm height and 3-6 perimeters above 18 mm.

Top layers: at least 5 (1 mm roof thickness).

Infill: gyroid, 8 - 15%.

The printing orientation provided on the slicer screenshot requires no supports (though, you still need your printer to be able to print at least 1 cm bridges in TPU).

After printing, cut out the lower bridging membrane on the side feet.

Theese feet were designed as a replacement for the hard rubber cast feet originally installed on the fan and should work with the original self-tapping screws.

Tagi