1 / 4
Nema 17 bowden extruder 2020 Mount with resonance dampening — zdjęcie 1
1 / 4

Nema 17 bowden extruder 2020 Mount with resonance dampening

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

If you have ever mounted a bowden extruder directly to a 2020 aluminium profile you most likely know what resonance is…

Ocena
0 / 5
Polubienia
2
Pobrania
14
Wydruki
0
Wyświetlenia
326
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

If you have ever mounted a bowden extruder directly to a 2020 aluminium profile you most likely know what resonance is :-)

To avoid the annoying noise caused by resonance I created this mount which allows you do decouple your nema-17 stepper motor from the aluminium frame it is mounted to.

After printing the parts simply glue some rubber-bands around the nubs of the clamp.

There is around 2mm of space for rubber.

Check if it still fits into the mount before actually gluing the rubber to the clamp.

You will need a 3mm screw and nut for the clamp and two 5mm screws and T-Nuts for attaching the mount to a 2020 aluminium profile.

Edit 2020-12-24: added a slightly stronger clamp as the original one broke.

Note: the stronger clamp requires a longer M3 screw.

Print Settings

Supports:

Yes


Notes:

You need supports for the mount.

No supports are needed for the clamp.

Category: 3D Printer Parts

Tagi