1 / 4
Nema 17 bowden extruder 2020 Mount with resonance dampening — image 1
1 / 4

Nema 17 bowden extruder 2020 Mount with resonance dampening

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

If you have ever mounted a bowden extruder directly to a 2020 aluminium profile you most likely know what resonance is…

Rating
0 / 5
Likes
2
Downloads
14
Makes
0
Views
324
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

If you have ever mounted a bowden extruder directly to a 2020 aluminium profile you most likely know what resonance is :-)

To avoid the annoying noise caused by resonance I created this mount which allows you do decouple your nema-17 stepper motor from the aluminium frame it is mounted to.

After printing the parts simply glue some rubber-bands around the nubs of the clamp.

There is around 2mm of space for rubber.

Check if it still fits into the mount before actually gluing the rubber to the clamp.

You will need a 3mm screw and nut for the clamp and two 5mm screws and T-Nuts for attaching the mount to a 2020 aluminium profile.

Edit 2020-12-24: added a slightly stronger clamp as the original one broke.

Note: the stronger clamp requires a longer M3 screw.

Print Settings

Supports:

Yes


Notes:

You need supports for the mount.

No supports are needed for the clamp.

Category: 3D Printer Parts

Tags