3D Printer Foot Mount with Vibration Dampening.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Locks the printer into place while absorbing vibrations
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 213
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
MechSmith's Foot Mount works great to lock the feet into place. I however experimented with it a little bit and used Autodesk Fusion to turn it into a damper / absorber. This was originally meant for the FlashForge AD5X but it should work well with any printer with a foot diameter of 24mm or less (or you could simply scale the X/Y axis to fit your printers feet.) I closed up the pass through hole (it's now 5mm deep) and extended the bottom by 10mm. Printed in TPU with a .6 nozzle, 3 walls (2 walls could work for extra flex but might need more infill so it does not sink in too far) and 20% Gyroid infill so it would get a good flex on all axis. Working great so far, you can actually see it move up and down a little while printing.