3D Printer Foot Mount with Vibration Dampening.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Locks the printer into place while absorbing vibrations
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 25
- Makes
- 0
- Views
- 213
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
MechSmith's Foot Mount works great to lock the feet into place. I however experimented with it a little bit and used Autodesk Fusion to turn it into a damper / absorber. This was originally meant for the FlashForge AD5X but it should work well with any printer with a foot diameter of 24mm or less (or you could simply scale the X/Y axis to fit your printers feet.) I closed up the pass through hole (it's now 5mm deep) and extended the bottom by 10mm. Printed in TPU with a .6 nozzle, 3 walls (2 walls could work for extra flex but might need more infill so it does not sink in too far) and 20% Gyroid infill so it would get a good flex on all axis. Working great so far, you can actually see it move up and down a little while printing.