194 models
3 Pieces... Actuator prints in place but flip it upside down! Spring should print fine but some people have messaged me saying they needed a raft Threaded cap.
It took me some trial & error to come up with this. It is most certainly not final because I need to tune it with the weight of the car. When loaded it should be partially compressed leaving some room for more compression and also some…
Neue Version verfügbar! / New version available! - Verbessertes design, schneller gedruckt, weniger Filament und Schrauben nötig. Improved design, less printing time, less filament required and fewer screws needed.…
28/02/24: Found a bug ! You need to use the new files… I also improved the overall rigidity by adding a PLA slide. TPU spring printing: I'm providing a “color change” in the print file; start with PLA (less than 1 mn) then put TPU. This…
This shock absorber is compatible to the common Lego axles. The sliding piece is put on the axle together with the pressure springs and blocked at the top. There are two versions, each with a hole at the top and an axle cross at the…
Summary Socket head screw M4x40 or M4x45 -> shorten the hexagon socket screw Front spring -> 0.8x12x40 mm -> is also working for the rear -> more spacers needed Rear spring -> 1.0x12x40 mm I used three spacers for the rear and one for the…
I didn't have any car parts such as shocks, differential and ESC and I didn't spend so much on that. Then I designed rubber band shocks and surprisedly worked well. It provides adjustability for front and back separately with using…
Spring is splitted in two parts (easier to print)
This model is compatible with the lego system.
I was amazed that manufacturers try to save money even on these small stuff. I noticed the other day that 3 of the 4 shock absorbers on the bottom side of the toilet lid were broken, after only 2 years of usage. They are originally a…
This model is compatible with the lego system.
Want to have spare parts without waiting for shipping ? This is the front shock absorber mounting plate for the wltoys 124008. I print it with carbon fiber nylon. Probably stronger than the original part if used with longer bolts. It…
FAQ I have built a X500 size quad-copter and I needed to reduce the vibrations to the MATEKSYS H743-SLIM Flight Controller as much as possible. This module will only fit the MATEKSYS H743-SLIM v2 and v3 flight controllers. To complete…
This is a 88.5 mm full 3d printed shock absorber Print it with support. Category: Robotics
This model is best made of TPU. I made this model for my Duster mk1 fl 2015 and it fits perfectly, now water does not collect in this place.
This model is compatible with the lego system.
I recommend printing the spring out of ABS. The rest can be whatever.
Reproduction of the original part to lock the air pistol during transport
Print with support & TPU filament
The former spring was quite fragile because of the print orientation; it would separate in 2 or 3 parts after a while. This design is basically two small springs similar to my PLA/PETG springs like in this design connected together so…
In the paper Acoustic metasurface-based perfect absorber with deep subwavelength thickness by Yong Li and Badreddine M. Assouar, is presented a “a metasurface-based perfect absorber capable of achieving the total absorption of acoustic…
This is a cap to protect and beautify the shock absorber bolts of my Mercedes W203. I printed on PETG to withstand the heat coming from the engine. Print with 25% infill. No supports needed.
shock absorber performance design
This is a, Capacitor + spike absorber + Vifly finder 2, support for a JeNo 5.1 Frame , remixed from my model for a Vifly finder mini. The JeNo 5.1 frame is an open source frame project design by Nochamo and JeromeFPV from the french…
Quick little shock absorber stand I knocked up. Sized for 1/10 touring car shocks, fits Tamiya TRF, CVA, Yeah Racing and XRay shocks. I've made the holes quite deep so buggy shocks might fit, I have yet to check. The centre hole and the…
Smoke Fume Absorber This project was realized while streaming live at https://www.twitch.tv/chrisfigge. Years ago i started soldering. And every year I'm promising myself to buy a fume absorber, but since today I've never did. So I've…
universal mount for fettec absorber and the 50V capacitor for use with cable ties https://fettec.net/shop/fettec-spike-absorber https://fettec.net/shop/kondensator printed in tpu 0.2 layer without supports I would be happy if you leave a…
Vibration absorbing feet for the Voron 2.4. Those that came with my kit were already flattened. So I printed my own using TPU90 from Polymaker. They work like a charm. I used PIF settings for the print.
Designed these to add some shock absorption to my longboard with TPU risers and reduce the teeth-rattling feeling I had going over cobblestones. These fit standard drop-through trucks and match the hole pattern for mounting. They're 2mm…
If you had to take apart the front/rear shock absorbers, you know that the holes to release the shock absorber are just covered with a sticker and re-sticking is not possible without glue, so I made a simple hole cover. Printed with PETG…
Dukedoks cramer truggy shock absorber https://cults3d.com/es/modelo-3d/juegos/cramer-truggy-rc-4x4-full-3d-printed
After seeing Taekys x axis bumper i also wanted to add one to the y axis so i designed my own. The credits for the x axis bumper belong to https://cults3d.com/de/modell-3d/werkzeuge/sovol-sv06-x-axis-tpu-damper. Print one in TPU. It slots…
3D model dimensions: washer 20mm, washer height 1mm, seat 16.5mm, plug height 6mm, recommended plastic PETG
This vibration damper can help to reduce unwanted vibrations on loudspeakers and other devices. Put one of them on each corner of your device. Print with max. 0.20mm layer height and use a softer material like TPU (hardness should be…
This is a 3D printed shock absorber I made for a future 1:5 scale RC car. the travel is about 40mm. It uses mineral oil (baby oil) as a working fluid and uses a M6x80 bolt with the head cut of and threads cut on the secound end as the…
This is a, Capacitor + spike absorber + Vifly Finder Mini , support for a JeNo 5.1 Frame . The JeNo 5.1 frame is an open source frame project design by Nochamo and JeromeFPV from the french community WeAreFPV . Details : I have a 10mm…
After moving my KOTTO Fume Extractor onto a small shelf, the pipe could no longer reach the solder fumes. So I created this simple right angle pipe to regain a bit of slack lost in the upward arch.
Tento stojan slúži na uloženie tlmičov pri výmene oleja. Priemer dier: 1,3mm ; 2mm; 1,8mm ; 1,5mm This stand is used to store shock absorbers when changing the oil. Diamater holes: 1,3mm ; 2mm; 1,8mm ; 1,5mm
These printable HiFi absorber feet are designed with the spike principle in mind. They have been tested and are currently in use with HECO Superior 840 speakers, which weigh 19 kg each. This specific design can only be achieved through 3D…
Due to its modern look, it will not disfigure our rooms, and additionally, it can have an aesthetic function. The device has a large contact surface of the absorber granules with air - thus the efficiency automatically increases.
APEX HD holder for Spike absorber vifly finder 2 and capacitor Ø10mm
I designed some shock absorber spacers for tamiya dt-03 chassis Neo Fighter They are used to use the maximum spring compression with the original shock absorbers. I noticed that the springs had little compression even with the stock…
I printed it with a 0.25mm nozzle out of PLA. Designed in FreeCAD.
Remember that you make all the changes to the moderator's work and are responsible for all the dangers. Insert for the Korsar pistol moderator. Under 22 caliber. Printed with Petg filament. Even without filling in the original moderator,…
A simple, friction type shock absorber for 1:10 scale RC buggies such as The Marmot and others. Use a M5 allen head bolt for stem. Also requires a metal spring to be used.
Aluminium Water Bottle Cover Shock Absorber - Copri bottiglia alluminio antiurto Dimensional measures: Small (Bottle Cover 1 / 2) inner Ø 66mm Outer Ø69x130mm Big_(Bottle Cover 3) Inner Ø 81.5mm Outer Ø84.7x183mm Resize to adjust…
TPU Printable Shock Absorbers for Padel Rackets Upgrade your comfort and performance on the court with these custom TPU shock absorbers designed for padel rackets. Engineered to minimize the transfer of vibrations from the racket to your…
I've designed this Ikea Lack table feet stabilizer/vibration absorber to build a 3D printer enclosure in the future. I have not tested them yet as can't currently print TPU, but will update this when I can. The measurements were taken…
DE Beschreibung: Ein praktischer Helfer zum bauen, reparieren, befüllen und reinigen von RC Stoßdämpfern. Diese verbesserte Version meines Modularen RC Stoßdämpferständers kann schneller gedruckt werden und benötigt weniger Filament und…
This is a suspension Shock from a go kart/ atv. I have worked on these machines forever, so its only natural I make a CAD for decoration of my garage.
The absorber prevents foam from escaping the skimmer. Other skimmers have this built in, unfortunately the Deltec does not. You can clearly see how well it works in the picture. For me, the part holds without gluing it (clearance ~0.4mm).…
Replacement Shock absorber cap for Alfa Romeo 156. It might fit 147 and GT also. Category: Automotive
worm shock absorber for your tennis racquet printed out of TPU and PLA
Many of the 32181 shock absorbers have a cap that fails over time, rendering the part useless. This part allows it to be repaired and used again. Print with supports (suggested model orientation in photos).
New spring stop for shock absorber for 1:16 RC buggy from XINLEHONG. The original one was lost. Parameters of the shock absorber: length: 77mm, width: 14mm, hole: 45mm. Using various colors can result in attractive modifications.
Borracha tampa de sanita Toilet lid shock absorber
I was looking for a commercial fume extractor but saw the price tag. So I searched for a DIY thing here at Thingiverse and found the fume extractors linked as remix sources. Though being nice, I thought of something more "complete,"…
Expanding on the Rancho Shock Absorber bushing files I made earlier. This set includes the L1 and L3 hourglass bushing shapes as well as the LS straight bushing. Files are OpenSCAD and they allow for user specified height/width, inner…
Printed with PETG 100% Infill
GENERAL: 3D file to protect your Eggs in the American Rocketry 2025 Challenge see The American Rocketry Challenge - World's Largest Student Rocket Contest . This year’s ARC challenge has 2 grade A large eggs horizontally mounted in the…
Toilet lid shock absorber replacement This design was computed for repair the shock absorber that i… stupidly… flush when I was woodcrafting the back furniture. It's a very fast print, which can perfectly fit the toilet lid hole spaced by…
The circular plate that the spring braces on at the bottom of the shock. What do you call this thing? Printed with PLA+ and will likely hold up fine but you're prolly better off with PETG
Will work even if your printer is not tuned well. Use lighter to remove strings.
Die Schockabsorber Füße wurden entwickelt, um die Leistung und Qualität Ihrer 3D-Druckumgebung zu verbessern, indem sie Vibrationen, Geräusche und unerwünschte Bewegungen minimieren. Diese hochwertigen Füße sind speziell für die…
This model consists of (2) 3d parts. They fit snugly one inside the other around a rubber vibration damper. The damper compresses vertically with about 40 psi of applied force per damper. The printed parts provide a rigid wall to prevent…
A container for introducing sodium chloride pellets. Personally, I prefer them over silica ones, but most designs are unsuitable as they are too small and leak liquid.
On my OPEL Meriva A the rear dampfer cap sliped down because of the rusty cap mount. The damper works well and i don't want to replace the whole damper only because of the damaged cap. It craps the cap on the top and snaps onto the damper…
With limited spare on my work bench, I started stacking small parts on top of the KOTTO fume absorber. But I kept bumping the tube coming out of it and every would fall off. So I created this part to attach to the top of the this KOTTO…
For a music room we wanted to install acoustic foam in an appealing form. We liked a few hexagons made of foam covered with felt, but we thought that the exact assembly could be a challenge. That's why we designed this template, which has…
Pajero 3-4 shock absorber strut spacer 10 mm thick.
After the injection moulded ABS clip broke at the screw junction on my shock absorber, I decided that it would be an easy piece to replicate. As a drop-in replacement, the piece reuses the same screws and friction pads. .3MF for printing,…
Italiano Questo design è gratuito a beneficio della comunità, ma se ti piacciono i miei design e vuoi contribuire, puoi fare una donazione a PayPal, che sarà molto apprezzata. Questo è un dumper Nema 17, serve per ridurre le vibrazioni…
Please leave a Like :-) Just my Design for a Shock Absorber Feet with 2 yellow Dot Squash Ball. 1.2 Wallthickness and 30 % Infill is stiff enough for my Printers. On FLSun I had to free some Space because of a Screw - Sapphire and JG…
The feeds are printed with 98A FLEX filament. The absorber under the Z Axis can be made more resistant by adding perimeter layers. I printed all the models with perimeter of 2 and Z axis with 3. For the MK3S, you don't need to print the…
Hello, Welcome to my profile, full of models and miniatures :-) I have for you RC T98 Land Rover Defender shock absorber support. Raises the car by at least 10mm!!!...the lift is really noticeable and the car is also more stable. It…
usefull simple design for avoid the bad view after shock absorber modification.
Models for sealing the Wltoys 12428 shock absorbers to prevent shock oil leakage. Only gasket and bladder are needed for the mod. Piston head is just a bonus part. Gasket and bladder should be printed with flex (TPU, TPE, etc.) filament.…
German Mein Design sorgt dafür, dass die Dämpfer (Shocks) oben an der Befestigung am Shocktower geschützt werden. Es funktioniert beim Team Corally Punisher (MLine) und wahrscheinlich auch bei anderen Modellen von Team Corally. Ich habe…
This is a string tensioner for robotic tendons with adjustable elasticity for series elastic actuators that I made for my projects. On the other end of the string there needs to be a string pulling actuator like a reel or a simple lever.…
*** EN *** I created a set of gauges for simple and precise height adjustment of shock absorbers (nut on the shock body). Print out a simple tray and measuring gauges of different heights. They are graduated from 3mm to 15mm. If a higher…
Dieses Modell ist mehrteilig, damit weniger Stützmaterial benötigt wird. Neu (April 26): Längere Version für 56er Rahmengröße This model is multi-part, so less support material is needed. New (April 26): Longer version for 56cm frame size
As my original shock absorber and o-ring got swollen by silicone oil in a Hydro-modification , I designed these replacements. The shock absorber is compatible with the GBX-100, GBD-100 and GBD-200. The o-ring will only fit the GBX-100, it…
Remix - in case you wanted to show off the filament and use less of it per panel side. Per unit: 1x wall mount, 3x Penal and 6x braces.
This is the lootable epic item from the video game, The Cycle: Frontier. Item Description: A component used for certain weapons with heavy recoil.
Printed in TPU. The side with the silver frame mount might need to have the z height scaled down a little as is slightly smaller (at least in my one). Update: I scaled X & Y to 95% to get a tighter fit on the shackle, over time the tpu…
This is a simple mount for your RC car's shock absorbers so that you can easily change the oil. ----- Dies ist eine einfache Halterung für die Stossdämpfer deines RC Autos, damit du den Ölwechsel ganz einfach erledigen kannst.
Material: TPU Layer height: 0.2mm Infill Pattern: Giroide Infill: 15% Wall loops: 2
Here is a model from Explorer's Guide to Wildemount that I couldn't find on the various printing sites the Aeorian Absorber. If you've been following along you might remember the Aoerian Reverser I made a little while ago. Like that one…
PET-G, infil 100%, it is necessary to work with the temperature so that the lower collar does not become numb....
TPU Three horizontal and three vertical, one shorter than the other. Two are 13mm inner diameter and there are two that are 12mm inner diameter. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200…
clips for non adjustable 1:10 shock absorbers.
Shock absorber for washing machine meant to be printed in TPU V1 - Normal model V2 - Less material needed same strenght
Needed to replace the odor absorber for my diaper genie pail. Had left over activated charcoal and decided to make an odor absorber. I used pla at .2. more wall the better for the snap fit. I printed the lid with the inside up and used…
This is an anti-vibration foot for 40 mm aluminum extrusion. I had good results using semi-flexible filament. I added some anti-sliding pad. They were specifically designed for an Ender-3 printer. It can be printed without support. This…
The landing gear absorbs the shock of rougher landings and spreads the forces onto a point nearer to the middle of the cross. It is spring loaded with common household rubberbands, and cam be clipped on the drone without glue. It can be…
Lyre webs for use with a Rycote INV 7 shock mount, though the adapter plug is a separate print and could be altered to fit other makes/models of shock mounts.
Resonance Absorber IK Multimedia iLoud Micro Monitor made with 85A TPU and 30% infill. Printer Ender 3 V2. Print speed 20mm/s
I've designed these for a simple Ender 3 enclosure I'm building out of 2 Ikea Lack tables. They are very easy to print, they come with 3 small holes to be screwed to the legs of the table. I've printed mine out of Filaticum transparent…
Shockabsorber Fill Table for R/C shocks This little tool takes r/c car shockabsorbers from roughly 1:10/1:8 scale cars with a diameter up to 11,5mm through the filling process. I own a Traxxas TRX-4 and it is tailormade for its…
