1 / 2
Kukirin G4 shock absorber hole plug
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Plug for access holes to the shock absorber bolts
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 105
- Makes
- 0
- Views
- 609
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
If you had to take apart the front/rear shock absorbers, you know that the holes to release the shock absorber are just covered with a sticker and re-sticking is not possible without glue, so I made a simple hole cover.
Printed with PETG 0.4 nozzle 1.6 layer height.
The plug should snap in nicely when pushed in and when the plug needs to be removed it is necessary to push it slightly from the back with a screwdriver or something slim a short :D ...