RC car shock absorber fully printed #4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Improved version with a visible TPU spring. It is compatible with my Unimog / RCCAR V2 designs (use retrofit adapters)
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 168
- Makes
- 2
- Views
- 821
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial
The former spring was quite fragile because of the print orientation; it would separate in 2 or 3 parts after a while.
This design is basically two small springs similar to my PLA/PETG springs like in this design connected together so they can slide along the piston (you can ease that by putting some lubricant)
Because this time the TPU spring is printed in the other direction, the flexing happens along the perimeters and not along the layers.
To print TPU, to protect your build plate I suggest using masking tape.