Füße für Sculpfun; Feets for Sculpfun
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Feets for Sculpfun S9 and simular frames. With mounting holes and designt to keep a honeycomb-plate in postition.
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 410
- Wydruki
- 1
- Wyświetlenia
- 2130
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Feetattachments with holes for moung it on the Sculpfun S9 and simular frames. It has holes to mount the feets onto the Frame (by M5 screws) and holes to mount it on a Surface like a Table or wooden board.
Additional its designt to take and keept a honey combplate/table of 432x432x20mm.
Smaler dimensions are also possible doue M6 screw holes (Ø5mm is Printed; M6-Threads need to be cut or formed)
I have printed mine with Fiberlogy PA12-CF15 becaus of its stiffnes (High E-modul). Even ASA and PLA would work.
You have to print "Sculpfun Füße V2" twice.