P
PrintablesJoerg Kraemer
Sculpfun iCube jig V2
JIG System for the Sculpfun iCube 3/5 w with Lighburn positioning helpers
- Pobrania
- 95
- Polubienia
- 10
- Ocena
- 0
Wyniki wyszukiwania: sculpfun
Liczymy pasujące modele…
P
Printables
Sculpfun Cable Holder
Simple and minimalist cable holder for sculpfun laser engravingers It uses 2 m3x4 bolts.
P
Printables
Sculpfun S30 Laser Height Adjustment Knob
The inner diameter is 8mm and has a depth of 6mm.
P
Printables
Sculpfun iCube jig V2
JIG System for the Sculpfun iCube 3/5 w with Lighburn positioning helpers
P
Printables
Sculpfun S9 tool rack
This is a minimalist tool rack for the Sculpfun S9 laser engraver. (print as shown on the picture) Enjoy !
P
Printables
Sculpfun S9 Cable Chain Upgrade & Limit Switch Mounts
Upgrade your Sculpfun S9 cable management and safety with this custom-designed mounting kit. Designed entirely in Fusion 360 , these mounts provide a secure foundation for adding drag chains and limit switches to your machine, preventing…
P
Printables
Sculpfun G9 Riser: Engrave Large Tumblers and Cylinders (>65mm)
Sculpfun G9 Riser: Engrave Large Tumblers and Cylinders (>65mm) Unlock the full potential of your laser engraver! This 3D-printable riser stand was specifically designed for the Sculpfun G9 , but its versatile design makes it compatible…
P
Printables
Support pompe air assist sculpfun S30 PRO 20W
Je voulais pouvoir me faire un système sur Silentbloc pour éviter les vibrations dans mon caisson que je suis en train de créer. jai donc créé un support pour mettre la pompe. Ce support est ajusté pour cette dernière. pour fixer le…
P
Printables
Sculpfun TS-1 screen bracket
This is my design of the TS1 screen bracket for use on the Sculpfun S9 (or other models) laser. Layer 0.2 Support Yes Need some M4 or M5 screws and T nuts too
P
Printables
Sculpfun S9 (or other models) U profile support for cable chain
This U profile supports gives you the possibility to better cable management especially for the Sculpfun laser engravers like S9 or S30. It attaches the cable chain (20X10) to the frame legs so all is kept together when lifting the frame…
P
Printables
Sculpfun S9 (or other models) air assist relay box
On my sculpfun S9 there is no way to switch a 230 volt air assist nor do I have a 12V type because of the fact that on an upgrade of the laser it would need a ne air assist because the voltage is different. I designed a simple relay…
P
Printables
Sculpfun S9 switchbox for Rotary or Bed movement
This switchbox is designed to make it possible to choose wether you use the rotary roller or the (honeycomb) bed for engranving or cutting. This way you don't have to everytime pull the plug from the Y motor risking broken cable or…
P
Printables
Soporte para Sculpfun TS1
Es un soporte para fijar la pantalla de control Sculpfun TS1 para grabadoras laser. está diseñado para ser fijado en perfil V-SLOT 20x20 con tornillos y tuercas de martillo M3, pero incluyo los archivos de diseño por si alguien necesita…
P
Printables
wall mount for Sculpfun S9
wall mount for sulfun S9. M4x2 screws are required for each bracket , I just put the top screw in and it works fine. No raft, No supports, filling density greater than 40% recommended . Print the same version for the supports you want to…
P
Printables
Sculpfun Rotary Roller - Rodillo giratorio base
Base to raise the height of the roller by 50 millimeters, useful for thermoses with handles or cups Base para elevar 50 milímetros la altura del rodillo, util para termos con mango o tazas
P
Printables
Sculpfun iCube body rods
All you need is a bit of epoxy glue, to bond these blocks inside the body of the laser, 4 nuts for 2 M6 rods. The lwr nut will secure the rod to not unscrew with vibrations. The rods end, are just a nice way to finish it, but not…
P
Printables
Sculpfun Limit Switch Mounts
Details Use a PCB limit switch (I had these left over from my enders after switching to sensor-less homing) 1xM5 bolt and t-nut to attach to laser cutter extrusion 2xM3 bolts directly into plastic hold limit switch Tried to make these as…
P
Printables
inmovilizadores para grabadora laser sculpfun SF a9 20-40W y para base honey comb
inmovilizadores para dejar fijo tanto la grabadora laser como la base para evitar tener que estar alineando a cada rato. se fijan con tornillos a la base de madera o a la mesa (recomendable una tabla para no romper la mesa). se tendrá que…
P
Printables
Sculpfun iCube Pro Mods
Sculpfun iCube Pro Mods I recently purchased an iCube laser and am quite impressed with the quality of the parts it can produce. However, I am not very impressed with the build quality of the machine itself. It has a lot of design flaws…
P
Printables
Sculpfun Cable Holder
Simple and minimalist cable holder for sculpfun laser engravingers It uses 2 m3x4 bolts.
P
Printables
Sculpfun S30 Laser Height Adjustment Knob
The inner diameter is 8mm and has a depth of 6mm.
P
Printables
Enhanced Knob for Sculpfun S30 Pro – Superior Grip & Precision
This upgraded knob is designed to replace the original on the Sculpfun S30 Pro CNC laser , offering a significant improvement in usability and control. After multiple iterations, this final version provides the perfect balance of size,…
P
Printables
Sculpfun iCube jig
Jig to fasten materials so they are straight and repeatable. Baseplate fits sculpfun icube 3/5w and fences
P
Printables
Cable organiser for LASER Sculpfun S30 remix
Cable retention and free movement when adjusting the laser height. I'll see if it works or adjust it... Uchycení kabelu a volný posun při upravě výšky laseru.
P
Printables
Sculpfun S9 clip on air assist hose holder
Bought myself Sculpfun S9 laser engraver and wanted to have removable hose holder for air assist so I designed it. It is designed for 6mm silicon hose (used for aquariums), if you have any other dimensions of hose I have included Fusion…
P
Printables
Multipurpose nozzle for Sculpfun air assist compressor
This nozzle could be used e.g. for extracting dust from electronics. Supports are needed. Just in a case when nozzle does not have sufficient hole use drill to enlarge a hole.
P
Printables
Legs to elevate the sculpfun laser
Legs to elevate the sculpfun laser when you are going to use it and need the structure to be higher. Without the need to use screws. Quickly and stably. 3 of the legs are the same, but the fourth is different because it corresponds to the…
P
Printables
Base Soporte para pantalla TS1 Sculpfun
Base soporte para la pantalla TS1 de Sculpfun, se puede fijar a una superficie vertical con tornillos de cabeza plana. Se puede imprimir sin soportes pero en algunos arcos presenta defectos, recomiendo usar soportes de arbol o ajustar la…
P
Printables
Sculpfun S9 Air Assist (remix)
This is a remix of a nice model. But I the inner diameter of the air connector was to small to get a good throughput without a high pressure. Additionally i want to have an angled connector, because the silicon tubes are so soft that you…
P
Printables
Cable Chain for Sculpfun S30 Pro (and S-models)
Cable and Air hose Management for Sculpfun S30 (Pro, Max) and S-models. Cable Chain + Gantry Attachment + Rail Support CABLE CHAIN 30x20 (30x20x40mm and 17x15mm internal) CableChain_3020_Start (1pz) CableChain_3020_Link (As needed for…
P
Printables
Eleksmaker A3 PRO/Sculpfun S9 Laser module security screws helper
EleksMakers A3 PRO AND Sculpfun S9 laser module owners can see the point here! If you have big fingers like I have it's almost impossible to tighten/loose those screws each time you change material so I decided to print myself a small…
P
Printables
Sculpfun icube smoke extraction adapter
A smoke extraction adapter for Sculpfun icube. To connect a 44mm internal pipe. You can use the originals screws for install it. I have print it in PETG with 0.4 nozzle.
P
Printables
Sculpfun S30 Ultra 33W Fume Extraction Nozzle
Fume extraction nozzle for the Sculpfun S30 Ultra 33W. Designed for use with a 22 mm CPAP hose to reduce smoke and improve cutting quality. Happy Printing!
P
Printables
Sculpfun S-Series Skadis accesories holder
The model is easy to print, no supports are areneeded. PLA 0,2mm layers STEP and Fusion files uploaded for easy modifications
P
Printables
Sculpfun S9 Laser feet and height extender
This is my design of mounting feet and height extender for the Sculpfun S9. I'm not sure, but I think it should work with the S6 (Pro) as well. These are mounting feet including the possibility to increase the printer, depending on how…
P
Printables
Sculpfun S30 pro max diode module screen replacement
well after scouring the internet for a replacement protective screen for my S30 pro max module and being unsuccessful so the only thing I could do is redesign a replacement based on the S30 ultra module cover design and print it myself…
P
Printables
Sculpfun iCube Ultra Perforated plate
Deutsch: 3D-gedruckter Montagewinkel mit Lochplatte (Pegboard) für den Sculpfun iCube Ultra Lasergravierer. Zur Organisation und Befestigung von Zubehör. Material: PETG/ABS empfohlen. Englisch: 3D-printed angled mounting bracket with…
P
Printables
Sculpfun iCube Ultra clamp & alignment set
The Sculpfun iCube Ultra Laser comes with a non honeycomb cutting plate - this makes it difficult to clamp down wood or other parts. I Found no other solution out there so i made one myself. I Printed the whole set in PETG. 0.2mm no…
P
Printables
Sculpfun S9 tool rack
This is a minimalist tool rack for the Sculpfun S9 laser engraver. (print as shown on the picture) Enjoy !
P
Printables
Sculpfun S9 Silicone Tubing clips
Silicone Tubing clips for Sculpfun S9 Clips are designed for silicone tubing 4mm inner diameter and 6mm outer diameter ( https://amz.run/5CFO ) Print Settings Printer: Qidi X-Max Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill:…
P
Printables
Sculpfun S9 Air Assist
Air Assist for Sculpfun S9. This air assist will compress the pump air flow through a hole of 3mm. This airflow will be driven with the laser beam to improve the cutting quality and remove the burning effect. It keeps also the original…
P
Printables
Sculpfun S9 Mounting feet
Mounting feet for Sculpfun S9. It provides an additional screw to block the Laser Engraver on the feet. Feet increase high of engraver of 20mm (size used by Ortur honeycomb support https://amz.run/5Ba5 ) Needed materials: 16 x : M4 nuts 4…
P
Printables
Sculpfun S9 Frame Mounting Feet
Sculpfun Frame Mounting feet compatible with the following models: S9 S10 S30 The feet slip on to the Sculpfun frame legs and can be secured using a single M5 bolt in each corner. I have included a recess for a nut. Print three copies of…
P
Printables
Sculpfun S9 Cable Chain Upgrade & Limit Switch Mounts
Upgrade your Sculpfun S9 cable management and safety with this custom-designed mounting kit. Designed entirely in Fusion 360 , these mounts provide a secure foundation for adding drag chains and limit switches to your machine, preventing…
P
Printables
Sculpfun S9 Laser cutter/engraver upgrades
I've made several changes to my Sculpfun S9: I made a housing for removing fumes. In this housing I created 4 ‘feet’ which are bolted to the floor of the housing so the laser frame does not move (nice for absolute coordinates) Also I…
P
Printables
Sculpfun G9 Riser: Engrave Large Tumblers and Cylinders (>65mm)
Sculpfun G9 Riser: Engrave Large Tumblers and Cylinders (>65mm) Unlock the full potential of your laser engraver! This 3D-printable riser stand was specifically designed for the Sculpfun G9 , but its versatile design makes it compatible…
P
Printables
Clamp for attaching the LASER TREE laser head to the SCULPFUN S9 laser machine
If you have purchased a SCULPFUN S9 laser machine but are disappointed with its power and are considering purchasing a more powerful laser head, but do not know how to attach it, this 3D printing clamp model can solve your problem by…
P
Printables
Sculpfun icube smoke blower extraction
Sculpfun icube smoke blower extraction. Replaces the original fan, for efficient smokes evacuation, the outlet does this with an inner 44mm pipe. For the assembly, I replaced the original fan with an old fan of the same size, on which I…
P
Printables
Sculpfun S30 Pro Crosshair Laser Mount
1. 5v 12mm diameter laser pointer. The version I use can be found here: https://www.ebay.co.uk/itm/284487018220 2.M3 x 12mm (x2) socket head cap screw 3.M3 heat insert (4mm long) (x2) or M3 hex nut (x2)
P
Printables
Sculpfun S9 Air assist E3D nozzle
For my Sculpfun S9 I designed an air assist nozzle which can hold an E3D nozzle. I tried an 1.0mm nozzle but positioning is rather hard so I drilled it to 1.5mm Tube for air assist is on the side (left or right is on you). I used a copper…
P
Printables
Focuscylinder clip for sculpfun S9
Little clip to store your focuscylinder of the laserengraver
P
Printables
Sculpfun S9 / S6 (Pro) Laser feet and height extender
This is my design of mounting feet and height extender for the Sculpfun S9. I'm not sure, but I think it should work with the S6 (Pro) as well. These are mounting feet including the possibility to increase the printer, depending on how…
P
Printables
Sculpfun S9 Adapter for Laser Engraver 15watts by infectedfpv26
After building the laser engraver by infectedfpv26, I found the Sculpfun S9 on Bangood was on offer, so I bit the bullet and purchased it. only thing then , of course the laser mount was incompatible with the S9 so I designed this.…
P
Printables
![Sculpfun S9 Quick change Air Assist Nozzle (improved version, no air leakage) [small calibration block update]](https://media.printables.com/media/prints/207924/images/1910451_daa0d910-f70f-49da-9182-5d5ebe19aa88/img_20220517_211543.jpg)
Sculpfun S9 Quick change Air Assist Nozzle (improved version, no air leakage) [small calibration block update]
improved version [small update: new version added with 3 cutouts for more places to put the calibration block. Disclaimer: I don't know if the lower nozzle parts are strong enough since material is taken away. Also you might just use the…
P
Printables
Sculpfun Laser Airduct radial fan.
This design is intended for a quieter "air assist" for multiple lasers. I designed it for a Sculpfun but it can also be used with other laser cutters. The best result is with an SLA printer or similar. I will soon add pictures of the…
P
Printables
Sculpfun S9 Laser Centering Helper
I recommend to center the laser from the software, then, using two vertical positioners (printed with different colors), manually center the engraver head as shown in the pictures. Also in the picture: Z-Axis lift:…
P
Printables
Sculpfun Laser head adapter S10 to S9
I've been sick about the bulky "okish" solution for the mounting plate of the Sculpfun S10 laser head to my S9. So I've designed my own, lightweight cover. It only weights 13 g after printing my version, so no much weight added to the…
P
Printables
Glass presser for Sculpfun Rotary Roller
because glasses gave rounded faces, they don't make good contact with the rollers so increasing the presure helps. Inside the glass their is a wheel ( a Plastic Bearing 6200 10x30x9 from ali express ) with a TPU tire. It is connected to…
P
Printables
Sculpfun S9 Air Assist w/E3DV6 Nozzle
Materiales requeridos: O-Ring 16mm x 2.5mm Tubo de silicón de 6mm Boquilla E3dV6 de cualquier diámetro (Requiere desgastar la punta para ampliar el diámetro y rebajar aprox 2mm de la rosca).
P
Printables
Sculpfun S10 limit switch mount
This mount adds limit switches while not losing any length on the X axis and only 3mm on the Y axis so the laser module or the shield doesn't smash up against the frame. I bought these readily available limit switches with LEDs…
P
Printables
Caja para placa mks dlc 32 2.1 para sculpfun s9
Retoque solo la caja para acoplar en laser sculpfun s9 , en el sitio del original , también hice hueco al ventilador
P
Printables
Sculpfun S10 to S30 Focus Cylinder Storage / Tray
After repeatedly searching for my focus cylinder all over the place, I had finally had enough. The holder is so precise that you can hear the last bit of air escaping when you insert the cylinder. You just need to use slightly longer…
P
Printables
Sculpfun Laser S9 to S10 linear rail endstop housing
I upgraded my S9 with the S10 laser head and linear rails and coulnd't find any working holder, so I designed them by my own. I used the red RepRap endstops see in the last picture. For the Y-endstop I made a bracket holder in 2 versions,…
P
Printables
Sculpfun Laser Z-axis lift holder S9 to S10
I used to use the simple yet genious z-axis lift from -Josh- for my S9. The orginal file can be found here: https://www.thingiverse.com/thing:5236996 After upgrading my S9 with the S10 laser head and the linear axis upgrade, i needed to…
P
Printables
Sculpfun S9 to S30 Laser height extender (with lower base)
All models were originally too high for my purpose so here we go: These attachments only raise the laser by 3mm as a first step, which still allows cutting paper or cardboard. Only when you attach the extensions does it get 30mm higher.…
P
Printables
Sculpfun S10 Limit Switch Brackets
Reworked from MB001's design on Thingiverse to allow bolting the limit switches to the Sculpfun S10 brackets. Disclaimer: Always check your wiring and limit switch type. The switches show only require two of three connections, see images.…
P
Printables
Centering circular jig for Sculpfun S6 Pro (v2)
This part is designed for the Sculpfun S6 Pro laser. First, it joins the outer diameter of the laser safety cover. Then, it centers the wooden circle part (the one you want to engrave) to the laser. I spent way less time with this jig to…
P
Printables
Sculpfun S30Pro Modifications
Update 30.11.22: English translation added (scroll down) Ich habe vor ein paar Tagen einen Sculpfun S30Pro Lasergravierer bekommen. Die Maschine ist klasse, benötigt aber meiner Meinung nach ein paar Optimierungen: 1. Cablechain Die lose…
P
Printables
Positioning guide for Atomstack S10 Pro and Sculpfun honeycomb cutting mat (400x400)
Just a remix to use a 400x400 honeycomb cutting board from Sculpfun with the Atomstack S10 Pro to position your material at the real origo point. Had to edit the offset to fit the frame of the honeycomb. Now it is snap-fit to the…
P
Printables
air assist sculpfun s9
Asistencia de aire para sculpfun s9, originalmente la tenia de manera que podia ponerle el protector original pero me dio algunos problemas a la hora de desmontarla y limpiarla y acabe partiendo el protector original de modo que diseñe la…
P
Printables
Sculpfun S9 Air Assist Nozzle
The Sculpfun S9 Laser Diode has threaded holes on the underside of the heatsink to which I've attached this nozzle
P
Printables
Sculpfun S30 calibration cilynder holder
Small simple holder for Sculpfun S30 focus cylinder holder, that attaches to rail.
P
Printables
Improved GT2 Belt End Clip / Holder for Sculpfun S9, S10, and other V-Roller Extrusion Based Machines
I initially tried downloading existing files of GT2 end clips but couldn't find any that met all of my criteria: 1) it had to be a single bolt fixture 2) it had to utilize M4 12mm bolts (which I had a lot of) 3) it had to have an easy way…
P
Printables
Sculpfun S30 (Pro - Pro Max) Screw improvement kit
Hi A small improvement concerning the adjustment screws of the Z axis of the laser, indeed I find the original screws difficult to handle. Simply snap in the originals screws into the printed parts I have also designed an adjustment screw…
P
Printables
Sculpfun S10 (S9) Screw improvement kit
Hi A small improvement concerning the adjustment screws of the Z axis of the laser, indeed I find the original screws difficult to handle. Simply snap in the originals screws into the printed parts I have also designed an adjustment screw…
P
Printables
Caja mks dlc para sculpfun s6
Tuve que diseñar una caja y un soporte de pantalla táctil de la marca makerbase, la mks dlc32 para ponérselo a mi grabador laser sculpfun s6. Esta diseñado para imprimirse con poco soporte. La caja se atornilla aprovechando los agujeros…
P
Printables
Laser Focus SCULPFUN S9
Replacement for the laser focus on the sculpfun s9 Category: Parts
P
Printables
Laser engraver Honeycomb board positioner and "fixation" - Sculpfun S30 ( S10 ?, S9 ? )
General Update how to support different Sculfun products / configurations: If your HoneyComb Board used is NOT the same size like mine: exactly 405 mm ( X-Axis ) by 405 mm ( Y-Axis ) mm we need to adopt the distancers. Measures and sizes…
P
Printables
Sculpfun S9 air assist hose holder
You can easily mount it under the two existing screws. Works with original hose, hole has diameter of 9.5 mm.
P
Printables
Sculpfun S9 drag chain holder - sits on X axis motor
This drag chain holder will “sit” on X axis motor. You will need two M5x12 mm screws with nuts to mount it above the X motor and two M3 screws with nuts to connect it with the drag chain (link below). The other thing is that it will…
P
Printables
Sculpfun S30 Pro Modifications – Revamp !!!
UPDATE March 2025 All please NOTE …. this is valid for all of my Sculpfun related designs: The Sculpfun modells AND accessories incl 3rd party DO COME WITH VARYING SIZE PARAMETERS. My Laser Frame size is: X-Direction 510mm and Laser…
P
Printables
Sculpfun S10 (S9) (S6) Screw improvement kit
A small improvement concerning the adjustment screws of the Z axis of the laser. I found the original screws kit was to thin to handle pressure of insertion. Simply snap in the originals screws into the printed parts and apply equal…
P
Printables
Sculpfun S9 laser feet 60 mm length remix
A friend asked me to print him the feet for his Sculpfun S9 laser engraver/cutter. He also asked me if I could extend the legs a bit more so I made 60 mm versions for him. I attached Fusion 360 files as well if anyone wants to play with…
P
Printables
Sculpfun Tool holder S9; Werkzeughalter f. S9
Remake of a design from Mr. Andre Champoux (https://www.thingiverse.com/thing:5340665): Modifications Removed T-Slot-Profile and added plattes for using M3x8 Screws with M3 Hammerhead-nuts or T-Slot-Nuts like New revison: Increased holde…
P
Printables
Sculpfun air assist Tube holder S9 Ø12; Schlauchhalter für Airassist S9 Ø12
Ähnlich zu Modell von Jardanovak Simular to the modell of Jardanovak , https://www.printables.com/de/model/413546-sculpfun-s9-air-assist-hose-holder but for tube Ø12x2 (Ø12xØ8)
P
Printables
Sculpfun end switch cable clip
You can click a clip into an aluminium profile. It a clip cannot be removed, it could be shifted out from profile end.
P
Printables
Sculpfun S9 air assist with Brassnozzle, for Tube Ø12; Sculpfun S9 Air assist mit Messingdüse für Schlauch Ø12
Model for S9 Airassist and an Silicone tube Ø12x2 (Inner diameter=8mm). After Printing drilling with an 5,0mm Drill and M6 Tap are required. Additional ab O-Ring 11mm x 2mm (Innder diameter x cord size) is need. Becaus of Airflow-tests…
P
Printables
Remix-Update (no coats): Laser engraver Honeycomb board positioner and "fixation" - Sculpfun - for use WITHOUT LegCoats, DIfferent Board Sizes !!!
2nd Update 2025 March ATTENTION: New Insights tell, that Sculpfun FRAMES also might differ . ==> Before Printing, please initially check size of LASER frame My calculations base on the FRAME Size of my Sculpfun Laser. Measurement from the…
P
Printables
Limit switch box for Sculpfun
Please prepare small pliers and remove all supports from inside the box. It is quite unpleasant work. Insert aluminium cylinders into holes. Move printed circuit inside. Just for the case, when you do not have circuits soldered, you are…
P
Printables
Laser engraver Rotary Roller and other purpose Height Adjustment Set - Sculpfun S30 ( S10 ?, S9 ? )
NOTE: The printable part that are mounted to the sculpfun frame ( 2020 extrusion profile ) here are designed to fit to the “coats” around the original legs of a sculpfun laser. For the coats pls refer to one of my other models ! ( The…
P
Printables
Kabelabdeckungen für Sculpfun S30
-Abdeckungen für die beiden Endschalter. -Kabelstaufach Unterteil mit Halterung für Abstandskegel. M5 Gewinde für Innensechskantschraube. -Abdeckung wird am Rahmen Festgeklemmt. Zwei M3 Schrauben mit Mutter und Beilage werden benötigt.…
P
Printables
Sculpfun S10 air assist hose Mounting
Sculpfun S10 air assist hose Mounting for a 6x1,5 mm hose from Hagebaumarkt, work also with the original hose.
P
Printables
S9 Sculpfun Cyclonic Air Assist
Updated 24 November 2023 (improved Thru hole and laser path) Hello Following the studies made on the high power CO2 laser (Trumpf laser) I decided to apply the "Cyclonic" effect to my S9 laser. The cyclonic design avoids interference in…
P
Printables
Sculpfun s10 lens Holder
Remixed from the original on thingiverse. https://www.thingiverse.com/thing:4716051 Original credit to John Wet https://www.thingiverse.com/john_wet/designs I find it easier to swap lenses, then clean a few at a time. This will hold 5…
P
Printables
Sculpfun S10 Cable Chain Top Connector.
Printed magpfpv's chain but the top connector for the S9 does not fit the S10. https://www.printables.com/model/271566-cadena-para-cableado-laser-scuplfun-s9 Took JPG_master's S30 top connector that does fit and merged them in Tinkercad.…