1 / 2
Sculpfun S9 air assist with Brassnozzle, for Tube Ø12; Sculpfun S9 Air assist mit Messingdüse für Schlauch Ø12 — zdjęcie 1
1 / 2

Sculpfun S9 air assist with Brassnozzle, for Tube Ø12; Sculpfun S9 Air assist mit Messingdüse für Schlauch Ø12

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Model S9 Airassist is redesignt to fit for an Silicone tube Ø12x2 (Inner diameter=8mm).

Ocena
0 / 5
Polubienia
4
Pobrania
104
Wydruki
0
Wyświetlenia
788
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Model for S9 Airassist and an Silicone tube Ø12x2 (Inner diameter=8mm).  After Printing drilling with an 5,0mm Drill and M6 Tap are required.

Additional ab O-Ring 11mm x 2mm (Innder diameter x cord size) is need.

Becaus of Airflow-tests with the Sculpfung pump (30L/min and 0,03Mpa) its recommendet to usw a nozzlediameter of 1 or better 1,5mm.

I prited it with Fiberlogy PA12-CF15 on a Prusa mini+

Addaption of the modell from Martin Arael to fit for an tube Ø12 x2 (Outer Ø12; Ø8 inner diameter)

Tagi