Improved GT2 Belt End Clip / Holder for Sculpfun S9, S10, and other V-Roller Extrusion Based Machines
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I couldn't find a GT2 Belt Holder that had all the features I wanted so I made my own design.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 201
- Wydruki
- 0
- Wyświetlenia
- 995
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
I initially tried downloading existing files of GT2 end clips but couldn't find any that met all of my criteria:
1) it had to be a single bolt fixture
2) it had to utilize M4 12mm bolts (which I had a lot of)
3) it had to have an easy way of gripping the belt without damaging it
4) it had to have a 1.5mm spacer underneath to push the GT2 belt down to the exact height of standard V-rollers on the Sculpfun S9 and other similar machines.
-----------
After some fiddling around, I managed to whip up a belt clip that had all of the advantages of the designs I saw online, and none of the disadvantages except being slightly longer.
You'll need M4 12mm bolts to affix these and a matching T-type extrusion nut per clip.