1 / 2
Customizable 10" Rack Mount for DELL Wyse 5070 Client
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mini server rack mount for DELL Wyse 5070 Client compatible with @MandicReally_151069 's Mod10 Server Rack.
- Ocena
- 4,667 / 5
- Polubienia
- 26
- Pobrania
- 187
- Wydruki
- 2
- Wyświetlenia
- 1236
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 2) (Komentarze: 6)Remiksy (0)Kolekcje (58)Powiązane
🧾 Bill of Materials:
- MAIN PARTS
- Front panel (1x)
- Hex panel (2x)
- Column Support Middle (2x)
- Column Support End (2x)
- OPTIONAL PARTS
- additional Extra Column Supports
- Long Dowel
- Short Dowel
🖨 Printing Tips and Recommendations:
- Material: PETG, ABS (I used PETG)
- Infill: 20% to 30% | Gyroid
- Perimeters: 4-5 layers (I used 5)
- Solid Layers: 6 layers for Top and Bottom
- Supports: N/A
- Print Orientation: as shown below…

🔧 How to Assemble:
- slide 2 hex panels along the front panel guide rails. This has to be a snug fit.
👆 TIP: If it is too tight, use a stick to lightly tap multiple times to drive it in. Equally and alternately tap both sides; lightly and patiently.

- slide 4 column support pieces along the hex panel guide rails; 2 pieces for each side. The end pieces has to be a snug fit as well.
👆 TIP: If it is too tight, use a stick to lightly tap multiple times to drive it in.

- Optional: slide dowels into dowel slots to improve structural strength. You can choose a short dowel or a long dowel.
❗WARNING: Short dowel can be hidden inside the slot but may be impossible to remove afterwards.
👆 TIP: If it is too tight, use a stick to lightly tap multiple times to drive it in.

- Optional: as needed, add extra column supports to strengthen the entire assembly.
👆 TIP: If it is too tight, use a stick to lightly tap multiple times to drive it in.

⚙ If ever you need to Dismantle:
- hold down the top while tapping the column support with a stick until it slides out

- grab the hex panels up while gently tapping the front panel away until the pieces slide out

Thank You!

If you like what I do and want to support my projects, it means a lot. Your support helps me keep making, fixing, and sharing the things I love—no pressure, just gratitude. Thanks for being here.
https://buymeacoffee.com/kraavs
