1 / 2
Customizable 10" Rack Mount for DELL Wyse 5070 Client — image 1
1 / 2

Customizable 10" Rack Mount for DELL Wyse 5070 Client

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mini server rack mount for DELL Wyse 5070 Client compatible with @MandicReally_151069 's Mod10 Server Rack.

Rating
4.667 / 5
Likes
26
Downloads
187
Makes
2
Views
1,236
Reviews
3

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Share Alike

🧾 Bill of Materials:

  • MAIN PARTS
    • Front panel (1x)
    • Hex panel (2x)
    • Column Support Middle (2x)
    • Column Support End (2x)

 

  • OPTIONAL PARTS
    • additional Extra Column Supports
    • Long Dowel
    • Short Dowel

 

 

🖨 Printing Tips and Recommendations:

  • Material: PETG, ABS (I used PETG)
  • Infill: 20% to 30% | Gyroid
  • Perimeters: 4-5 layers (I used 5)
  • Solid Layers: 6 layers for Top and Bottom
  • Supports: N/A
  • Print Orientation: as shown below…

 

 

🔧 How to Assemble:

  • slide 2 hex panels along the front panel guide rails. This has to be a snug fit.
    👆 TIP: If it is too tight, use a stick to lightly tap multiple times to drive it in. Equally and alternately tap both sides; lightly and patiently.

 

 

  • slide 4 column support pieces along the hex panel guide rails; 2 pieces for each side. The end pieces has to be a snug fit as well.
    👆 TIP: If it is too tight, use a stick to lightly tap multiple times to drive it in.

 

 

  • Optional: slide dowels into dowel slots to improve structural strength. You can choose a short dowel or a long dowel.
    ❗WARNING: Short dowel can be hidden inside the slot but may be impossible to remove afterwards.
    👆 TIP: If it is too tight, use a stick to lightly tap multiple times to drive it in.

 

 

  • Optional: as needed, add extra column supports to strengthen the entire assembly.
    👆 TIP: If it is too tight, use a stick to lightly tap multiple times to drive it in.

 

 

⚙ If ever you need to Dismantle:

  • hold down the top while tapping the column support with a stick until it slides out
  • grab the hex panels up while gently tapping the front panel away until the pieces slide out

 

Thank You!

If you like what I do and want to support my projects, it means a lot. Your support helps me keep making, fixing, and sharing the things I love—no pressure, just gratitude. Thanks for being here.

https://buymeacoffee.com/kraavs

https://coff.ee/kraavs

Tags