200mm Fan Front for Fractal Node 304
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a custom front design to fit a 200mm Fan with custom 3mm mesh or dust filter for the Fractal Node 304 Case.
- Ocena
- 4,714 / 5
- Polubienia
- 137
- Pobrania
- 2077
- Wydruki
- 7
- Wyświetlenia
- 17 173
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
Featured in “Wolfgang's Channel” channel:
This is a custom front design to fit a 200mm Fan with custom 3mm mesh or dust filter for the Fractal Node 304 Case.
I am using a 200mm Noctua fan (Noctua NF-A20 PWM chromax.black.swap) that only consumes 0.96W of power and replace the three internal fans of the Fractal Node 304 case.
Minor front adjustments (drill/cut) are necessary to optimize airflow.
3mm threaded insets in the front to fix with M3 screws to the Fractal frame.
I also use a standard power button with 16mm thread. (https://www.amazon.de/gp/product/B09FSLP2QQ/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1)
Standard print settings for Prusament PLA.
_______
If you like my uploads buy me a coffee -> https://bit.ly/pwave-donate