Common Settings to Change for Better Printing v6-27JUL2026
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Common Settings to Change for Better Printing - Flash Forge Creator 5 & 5 Pro Big Fast Square - Speed & PA Test
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 220
- Wydruki
- 0
- Wyświetlenia
- 725
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
The following PDF contains custom settings that work better than the default profile included with the Flashforge Creator 5 and Creator 5 Pro. Most of these settings will also work with the Flashforge AD5X and possibly other printers such as the Creality K1 Max.
Also included is Big Fast Square.stl. This simple print helps track the printer’s speed using the Device Info button in the printer menu. It prints an inner wall, outer wall, and inner wall, allowing you to compare the actual print speed with the slicer settings.
The two square corners can be used to check pressure advance. If the corners are not sharp and square—appearing rounded instead—then the pressure advance value is incorrect. Re‑run the slicer’s pressure‑advance calibration to obtain a new value.