Liczymy pasujące modele…
The build print the necessary parts press fit the Y axis aluminum spar in to “base 2.0” run wires thru the center of the spar screw in a m3-16 bolt in to the base flush against the wires screw 4 m3-20 screws in to the base in holes after…
The Recreator3D.com –MK6 : FUN SIZE - a KB-3D.com Build Kit Experience - Turning PET1 Bottles into Filament! BUY A KIT HERE!!! 🚀 KB-3D's Impact on the MK6 Kits Since 3DPrintopia 2024 , KB-3D has helped take the Recreator3D MK6 from a DIY…
CMIYGL keychain where you an put your own photo or just Tylers one
This mount helps to mount a Corsair Xeneon Edge display to a Moza wheelbase to use it as a dash for simracing. Requires 2x M3x10mm and 2x 10mm 1/4"x20 bolts (AV standard) to secure. The dovetail design allows for removal of the dash when…
Parametric drawer divider creator Parametric drawer divider creator Width --- Drawer width (if the drawer is wider than your printer, you can divide it into two or however many pieces you need) Length --- Drawer length (if the drawer is…
Tyler, the creator's album keychain "Chromakopia"; 3.7cm high, 4cm long and 1mm thick.
I made the Dual motor mount for recreator 3d fun size stronger. You need to print another gear like the original one. It can be used with one or two motors.
top cover with fan mount for my recreator mk6 anycubic vyper version just covers the hole in the top and adds a cooling fan to the mainboard
READ THE INSTRUCTIONS.PDF FILE BEFORE PRINTING! There are three Funnel/Cavity sets you can download and print. You only need the "Size A" set for the this particular ice tray mold. Other words will become available later that will use the…
adapter to use the spooler with mk5 recreator
The original page has become flooded with over 60 files. It is a pain to update both imperial and metric versions, especially since I only use a select few for my personal build. This is what I use to hit 230 fps consistently using the…
Not a whole lot to be said. It uses 4 5x2 magnets. See pic for print orientation, you don't need supports.
UPDATE 3/24/2024: I removed the banana and rocket carts Version 2.0 has been uploaded. Everything has been revamped with the exception of Cube.stl , Slope 1.stl and Slope 2.stl . The new rail system allows the cart to ride along it…
The Recreator3D community cutter works well for cutting PET bottles for pultrusion recycling, but normally needs labor-intensive disassembly and reassembly to swap out the top part for different cutting depths, making it difficult to…
These are a few parts to make a single-extruder conversion for the old FFCP printers. These are very easy to print. No supports needed and you can use all existing screws and mounting positions.
Hi there. We are Hendrik and Andy, and we are trying to develop a stable and efficient tool changer 3d printer. Of course, it is almost impossible to do this without influence of other projects, but we made sure that our printer is fully…
I'm going to CFG dressed up as igor in the earfquake music video. I needed this golden pin, so I made it. works great! I would highly recommend using adhesion for this, AND using as fine resolution as you can. I’d also love to see how…
The hinge bolts that come with the helmet are plastic and very weak. It's too easy to overtighten the helmet (to keep it from slipping down) and break them. Hardware Required 2 * M6x25 Hex Head Bolts Print Settings Infill - 100% Perimeter…
This tool is designed for the music teacher who writes music on a dry-erase board. This tool holds 5 expo markers for drawing perfect bars. Pull the tops off of 5 expo markers, slide them in the holes on the holder and you are ready to…
Equation Creator Spinner with Multiplication, Subtraction, Division, and Addition and numbers 0-9 Create math Equations with this equation spinner! Material: PETG Printer: K1C
Print 2 spacers as the tensioner will slide the filament off the spool
Tyler, The Creator Spotify code keychains. Scan the code on the keychain in Spotify and the song you have chosen will begin playing. If you have any song codes you want to see leave a comment.
Tyler, The Creator "Call Me If You Get Lost" Keychain. Feel free to request any more keychain ideas. Thanks
The difference between 2.0 and 3.0 is that 3.0 has slightly larger lettering (keyring size is the same) Update: 4.0 has been added and has a better keyring
Chromakopia Mask from Tyler the Creator's new Album
Fan art of “The Creator” made in Blender 3.2 Printed on my LONGER LK5 Pro with tree supports in Cura
This is a Spool Holder for flexible filament spools for the Flashforge Creator 4. You directly feed the filament from the top of the printer without the bowden tube friction. This way you do not need to pay 1000 bucks for the original…
i printed in abs to avoid deformation. the file is in 3mf to open in prusa slicer, in order to import negative shapes.
New spool holder for old-type (wooden) Flashforge Creator. Fits standart 1kg filament spools. You should rotate holder model upside-down in your slicer. Print Settings Printer Brand: FlashForge Printer: Creator Pro **Rafts:** No Supports:…
Project: CHROMAKOPIA HueForge.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 210x210mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and…
Adapter for Flashforge Creator Pro 2 original spool holder This adapter mounts to the original spool holder allowing you to use third party filament reels
Flashforge Creator Pro 2 Wildone container holder Windone container : https://www.amazon.it/dp/B07L2QJ5LB?ref=ppx_yo2ov_dt_b_product_details&th=1
This extender serves to insert wider rolls of filament into the Creator3 pro. up to 89mm
this is for making 3d printed models of Occlupanids. as of writing this, it is very basic.
Remixed a version of the large gear of the recreator machine. The difference is that I removed the words along the outside but kept the recycle symbol to simplify the design, use less material, and reduce print time
To you? A ‘like’ may not feel as though it makes much of a difference. To a creator it's a thanks for making the thing and taking the time to share it. Regardless of who created an stl or set, wherever you download from, if it was worth…
For the rest of the MK6 Files go to This Link and download all the files you are going to use + this file and start printing if you have any issues feel free to comment with an image that represents your issue and I will try my best to…
Nice micro shower head replacement. G1/2 thread, which screws into shower hose. Internal design creates a rotation in water flow before going through nozzle - see cross section view. Thus it creates a solid wide mist of water - perfect…
Spacer for MK6 Ender 3 PSU to make the mainboard fit with the chunky Ender 3 PSU because the original model was modeled after the skinny Ender 3 PSU. Some side notes you have to download all other parts from the link above this model uses…
About this mod This mod is designed to be an accessory to other recycling equipment such as an ARTME3D, Filament re-extruder, Injection molding machine or other plastic recycling machines that require re-ground plastic. It uses the same…
This is a case for the Raspberry PI Zero 2w case for mounting it to the back of a flashforge creator pro. It may work for other use cases, but it was designed for that purpose, and the bracket is meant to fit the creator pro, and the…
A mounting bracket for the flash forge creator pro. Mounting will require 2x 50mm M3 machine screws, as well as 2x 10mm M3 machine screws.
I got lots of binding on the original gears for the Mk6 recreator, even without a strip in the machine. So I thought a set of herringbone gears would help keep them from rubbing on each other and binding up. They are based on the stock…
A 4"x4" mini lithophane of the album Chromakopia.
Foot for the FlashForge Creator Pro Printer. STL and SolidWorks files included.
The build print the necessary parts press fit the Y axis aluminum spar in to “base 2.0” run wires thru the center of the spar screw in a m3-16 bolt in to the base flush against the wires screw 4 m3-20 screws in to the base in holes after…
This is a Spotify keychain that if you scan will bring you to Tyler The Creator on spotify.
The original cooling fan wasn't strong enough, so I made this stronger version. Printed parts: holder 1x cover 1x spacer 4x Other parts: 24V* 40x40mm cooling fan 1x M3 bolt 4x M5 bolt 2x M5 T nut 2x *You can also use a fan with a…
Here’s an updated description for your Recreator3D wood version motherboard cover : This is a custom motherboard cover for the Recreator3D, designed specifically for the wood version with a 155mm width. This cover ensures your motherboard…
This piece solves a problem of easily breakable original PTFE aka reverse bowden aka filament tube guide on the toolhead cover. It is recommended to print it in 95A TPU (must be a flexible filament) with 2-3 walls and 15% infill. To…
I made this to streamline the aesthetics I was looking for
We finally upgraded our old first generation Flashforge Creator Pro 3D dual extruder to the quiet control an SKR 1.2 Pro with TMC2209 drivers and a TFT35 E3 to keep tabs on things. I needed to mount the screen after getting everything…
You can use this mount on the Ikea Bekant sit/stand electric desk . Print the 5 parts (Generic print outside part twice). There is a version for a generic square PC casing and one that is adapted to the MSI Creator P100X 11. Also you will…
This remix adds a plate to the left of the hotend on a Recreator3d MK6 Fun Size, replacing the mini spooler. This plate is designed to be used with the V3 Community Bottle Cutter and has the appropriate matching M3 mounting holes, as well…
Have a Creator Pro that want to breathe new life into? This bracket is designed to use the existing mounting points on the printer but allow the installation of an SKR Mini E3 v3 motherboard and a Raspberry Pi 3 / 4 or Bigtreetech Pi…
After printing and assembling Dustin's design I discovered that between my print settings and the thickness of the bottles I was trying to cut the plastic strip was forcing the bearings apart rather than being cut by them. I added a rib…
The model is a set of two trays to organize components of the GoPro Hero 13 Creator Edition within the original case. Top tray has recesses to hold the GoPro camera, Media Mod, Volta, large thumbscrew, magnetic latch, charger and two…
every album made by Tyler the creator these are all single color files make sure to do a layer pause a layer 8 and switch colors there (bright color on dark color, or dark on bright color recommended)
print as many additional chains as you need for your self
Simple spacer for the flashforge creator pro fans as the can get lost very easily. I printed them with a resin printer as resin is more resistant to heat . I have not tried using them with a filament but i would not risk printing them in…
update : I have included a pdf in the files to show assembly with renders to help make building this a bit more smooth. Some parts may have changed since I started putting this together. All uploaded parts are the most recent. Recreator…
After months of 3D printing Star Wars trinkets, Chris Pirillo finally found a need to have his own Maker Coin! After countless attempts, the best he could come up on his own was a flat circle. Thus, he turned to his community and…
I looked at the filament mount my Flashforge Creator Pro came with and thought: What if it had ball bearings? So I did a re-design and later added a guide to prevent filament jamming. For a more detailed description see the pictures and…
A spacer for the hexagonal hole in the reduction gear that mounts on the wheel bearing. The hexagonal walls are too large to capture the hexagonal locknut, but the standard Ender M5x30mm bolt can be inserted in the well. This spacer makes…
Motivation The Recreator3D MK5 build assumes you have an Ender3 V1. In my case the donor printer was V2, so many things had to be adjusted for the V2 parts, including the fan shroud. The fan cover STEP file taken from Creality GitHub was…
The switch that I had was too large for the original model by PackratArt , so I expanded its cutout a bit and moved to the side.
The Recreator3D.com –MK6 : FUN SIZE - a KB-3D.com Build Kit Experience - Turning PET1 Bottles into Filament! BUY A KIT HERE!!! 🚀 KB-3D's Impact on the MK6 Kits Since 3DPrintopia 2024 , KB-3D has helped take the Recreator3D MK6 from a DIY…
really thin model in person but works great
A basic 3d-model of the sword used by Altair from the anime Re:Creators
Parts to replace the Recreator Mk5 circuit board cover section. This allows easier access to the board while testing electronics. This change incidentally makes the parts easier to print.
A basic 3d-model of the lance used by Aliceteria February from the anime Re:Creators This includes a full model as well as one split into 14 parts for assembly using 4mm support rods
A basic 3d-printable model of the submachinegun carried by Altair from the anime Re:Creators This includes a full model as well as one split into 5 parts for assembly using 4mm rods
A basic 3d-model of the sword used by Selesia Upitiria from the anime Re:Creators This includes full model of just the handle as she carries it in a retracted state as well as a full model of the sword and a version of the sword split…
I remixed the Original model, to fit the wider Creator Porsche.You can hang it with the rear axle, to a IKEA Skadis board.
A basic 3d-printable model of the gauntlets worn by Altair from the anime re:creators
I have a rack of filament spools mounted above my printer and after recently restoring my Tunell Filament Monitor to working function )one of the tensioner arms broke awhile back), I needed something to guide the filament to the rear…
Make a simple enclosure for your FFCP printer to help reduce noise output and help retain heat generated by the HBP and hotend. A filter can be fitted to the enclosure to help eliminate odors caused by various filaments during printing.…
FlashForge Creator Pro - SD Card Cover keep junk from getting in the hole Add another file (before slicing) and position it above the card cover file for a different look! Do not print FFCP-SD_cc_assy.stl as it is only for assembly…
Mount set for the Tunel Filament monitor found here... http://www.toybuilderlabs.com/collections/best-selling/products/tunell-3d-printer-filament-monitor?variant=963597848 I rounded a few corners on the main brackets and made the back…
I really liked the original design but I wanted to speed up the print with the rounded corners and I added a peg for hanging my scraper. Thanks to basnettd1 for the original upload in which my design/remix is based. Happy printing! Print…
This is a mod for the Recreator3D MK6 that turns it into an Automatic Material System (AMS) which is able to automatically feed new filament into your printer when the filament you started the print with runs out. Purpose: When making…
just some small changes done to the openScad file: ...so that the created plaque can comply with different standards. support pads can be added for easier printing. 'index' corner cut to gauge correct orientation. the dot shape can be…
This is a model of the side panel on the Axiom Precision AR-Pro / i2R A-series CNC routers. Step file included for remixes, mods, etc.
i messed something up on the models so you gotta print with support
Customized version of http://www.thingiverse.com/thing:1949142 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1949142 Instructions Category: 3D Printer Accessories
English Description: This upgrade kit is an extension of the original Recreator 3D system and is specifically designed to utilize the stock components of the Ender 3 V3 SE. The original design was intended only for the classic Ender 3, so…
Revised version of the 8mm bottle cutter for the mk6 fun size re-creator PET machine
Snap on 40mm nozzle fan holder. I'm using mostly the right extruder so that's what I build this for. But there is also left version and a center one. I'm not sure how good the center version works as the fan is blowing between the two…
### UPDATE: I made a better one: http://www.thingiverse.com/thing:1272643 This is a really simple and functional holder for a 40mm nozzle fan for the Flashforge Creator Pro. It simply snaps into the two small holes on top of the extruder…
A minimalist stand designed for the Samsung Creator S-Pen, like an old-school ink well, but make it modern. Radius: 5mm 0.5cm Diameter: 10mm 1cm Hole Depth: 2.85cm 28.5mm The remaining Pen will be about 12.5cm long when inserted. ‼Don't…
CMIYGL keychain where you an put your own photo or just Tylers one
