1 / 1
Recreator Spool for wide stripes and recreated filament.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Recreator Spool for wider stripes up to 15mm with bracket
- Ocena
- 4 / 5
- Polubienia
- 45
- Pobrania
- 220
- Wydruki
- 2
- Wyświetlenia
- 1360
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (41)Powiązane
I always used JRT3D minispools for the recreator and the new bottle cutter from Ricardo Pereira open up a world of possibilities.
Unfortunately there were no mini spool for wider stripes or longer filaments so I remixed one and resized the bracket.
Any material is viable for the print and Top and Bottom can be connected with flush m3 screws, I recommend m3x10mm.
The bracket requires support and prints better with the provided orientation.