52 modeli
Designed with the support and contributions of the “Recreator 3D” Discord community. This design uses a router bit as the main cuter. Has support bearings on both ends of the cutter for added support and tool longevity. Uses a small cheap…
STOP!!! If you don't choose to participate in what is considered a BETA print. Follow this link to known working files. https://www.printables.com/model/179820-the-recreator-3d-mk5kit-ender3-diy-3d-printer-fila BELOW …is the BETA Step…
Original design here: https://www.thingiverse.com/thing:6186432 I really like the design and idea from dalia5. I remixed theirs. Some items in this remix: - Increased tolerances - reinforced cutters - guides 'snap' into place - penny…
MELD: A Filament Joiner September, 2022 After working with Mosaic’s Palette 2 Pro, I wanted to find a cheaper off the shelf method for filament joining that didn’t cost $500. Sticking to Recreator3D’s mission; I started work on, MELD: A…
I really struggled to get the original design with bearings working reliably, so I did this remix using 18mm snap blades, which I have hundreds of. The blade will cut about 10 bottles before you need to snap that section and go to the…
The Official Recreator3D Mascot... Captain Recreator! Created by the Amazing, Wekster! https://www.patreon.com/wekster https://www.thingiverse.com/wekster/designs FACEBOOK: http://facebook.com/groups/recreator3D DISCORD:…
The Recreator3D.com Community Bottle Dryer Prints on a 200x200 Bed Uses a 40MM Fan for Air Circulation To Power the Fan, Use a 5 Volt Fan and Wire it into a 5 Volt Power Cord for a Phone Charger or equivalent. Just make sure to use a…
The Recreator3D.com Community Bottle Dryer V2 is made for smaller build volumes . No longer limited to size! Very interchangeable and easy to alter for your varying bottle sizes . Easy to put together. Some strong glue is suggested to…
The Recreator3D.com - Mini Spooler, Holder and Enclosure.
ENGLISH: Modification of the filament guiding system: - Modification of the system bar by a plain steel bar of 8mm instead of 10mm. - Modification of the support feet of the bar, 8mm hole instead of 10mm - Modification of the guide to…
ENGLISH: Setting up a bearing system on the large wheel : Materials required: 2x 608ZZ bearings 1x threaded rod 8mm diameter, 152mm long This system is added to the original system, avoids waste. 1. Print the bearing holder part in 2…
ENGLISH: Changes in ventilation: - Change of fan for a 40x40x10 Silencer (12v) - Addition of a LM2596 step-down device (model below). - Housing for LM2596 hooked on the side of the aluminum profile FRANCAIS: Modifications de la…
Made to facilitate mounting the lead screw without needing some sort of adapter. Having an early ender 3, the lead screw nut does not feature 4 mounting holes. Therefore, I remixed HumbleDeer's SETP file to accomodate this nut. The…
drill bit has an 8mm “insert” since the torque is relevant, use a 3d infill (recommended gyroid 40%) and 4-5 perimeters, PETG or ASA/ABS are recommended.
I encountered difficulty attaching the original design due to the fastener being positioned beneath the tensioning rod. The use of hex wrenches with a ball end could facilitate this process, but my current set only has flat ends. The…
The switch wires are shorter on the E3V2 so I modified the original housing to comfortably work, as long as you use the switch adapter that I also remixed.
Modified "Bottle Cutter - Top - 8mm" part to fit 5 Forint (HUF) coins. 21,4mm
Plate with ducting to allow the use of 40x40x10mm fans (like the Noctua ones in the photo) for a quieter experience. The step file is available if you wish to edit it for tolerances or to use heatset inserts, for example. By default, the…
-improvement The plastic gear is now not in contact with the motor rod. (this prevents the gear from being blasted by friction and heat.) It now use an aluminium coupler to make the link between the motor rod and the 3D printed gear.…
press-fit 10 cents SGD coins to use this PET plastic Bottle Cutter with the Recreator3D. 6mm size strips
This remix has the model entirely redrawn as a solid body. The model present in the MK5KIT r2 assembly is a converted mesh file, and not a true solid body. This version is a solid model recreated as faithfully as possible with a few…
After printing and assembling Dustin's design I discovered that between my print settings and the thickness of the bottles I was trying to cut the plastic strip was forcing the bearings apart rather than being cut by them. I added a rib…
Using a Creality CR-10S as a driver and LCD? To use it with stock Firmware without reflashing, you’ll need to make sure to have a thermistor connected to the bed as well closing connection on the filament runout sensor. Then the g-code…
The Recreator3D community cutter works well for cutting PET bottles for pultrusion recycling, but normally needs labor-intensive disassembly and reassembly to swap out the top part for different cutting depths, making it difficult to…
!!! Attention !!! This project is still being produced. Please be careful of any possible damage. --- Print Setting 3 walls 20% 3D Honeycomb. The outer gear should not use brim. Aggressive elephant foot compensation is OK. All part not…
modified PET bottle cutter to press-fit Singapore SGD 10 cents coins.
i made this to help quickly wind a spool with stripped down plastic bottles. for PET/HDPE recycling added the mounts, spacers, rod, and spool for a complete set! also has a 9v battery terminal adapter, fits M4 machine screws for…
This remix adds a plate to the left of the hotend on a Recreator3d MK6 Fun Size, replacing the mini spooler. This plate is designed to be used with the V3 Community Bottle Cutter and has the appropriate matching M3 mounting holes, as well…
Motivation The Recreator3D MK5 build assumes you have an Ender3 V1. In my case the donor printer was V2, so many things had to be adjusted for the V2 parts, including the fan shroud. The fan cover STEP file taken from Creality GitHub was…
The original cooling fan wasn't strong enough, so I made this stronger version. Printed parts: holder 1x cover 1x spacer 4x Other parts: 24V* 40x40mm cooling fan 1x M3 bolt 4x M5 bolt 2x M5 T nut 2x *You can also use a fan with a…
This is a remix of Part 5B for the Recreator3D MK5 series of PET Pulltruders. This now uses a 608 bearing in place of the POM wheel. If you wish to remix this to use a different size bearing or for any other reason feel free to find this…
A spacer for the hexagonal hole in the reduction gear that mounts on the wheel bearing. The hexagonal walls are too large to capture the hexagonal locknut, but the standard Ender M5x30mm bolt can be inserted in the well. This spacer makes…
This is a mod for the Recreator3D MK6 that turns it into an Automatic Material System (AMS) which is able to automatically feed new filament into your printer when the filament you started the print with runs out. Purpose: When making…
Laser cut out of 1/8in or 3mm plywood or acrylic and glue together. you can add or subtract inner pieces for different width pet strips.
Adapter plate for the Recreator3D MK6 filament maker. Replaces the power plug used with the internal power supply with a plug for an external one. The power supply I used is liked below.…
You will need to print the plunger, cap, and one of the tubes. I have uploaded two sizes to allow for printing on machines with different Z heights. If you want you can substitute the printed tube with a piece of PVC pipe from the…
I made this to streamline the aesthetics I was looking for
Have you ever wanted to build a Recreator3D MK6 Fun Size with parts from an Ender-3 Pro but don't want to get a 12 volt power supply and heater cartridge? Have you had to settle for having an external PSU hanging out the back of your…
Introducing PrintABlok compatible side panels for your Recreator3D MK6 “FunSize” pulltruder. Now you can bask in the glory, knowing you will be able to build additional storage onto your funsize for your tools such as tweezers to aid in…
Custom Knob for Recreator3D pet pulltruder For instance: Recreator3D mk6 fun size foundable here: https://www.printables.com/model/352729-the-recreator-3d-mk6-fun-size-a-diy-pet1-plastic-b
I had issues printing the “tube” model from the original design. The supports were very hard for me to remove without damage. I had some old PVC pipes lying around, so I chopped them up instead and made some simple fittings. The fittings…
The Recreator3D PET1 Spooler Connector, uses 2x - M3x4 (or taller) screws. Reduces a rough start to your pull. - Connect one side to a draw string (we used some PET1 Filament) and connect it to the spooler. You'll want to use two of the…
Another try for better newcooling. Controlled air, from other direction. Uploaded: Freecad FCStd file and .step and .stl
I really liked the swappable cutter guides but I needed a way to keep them organized. I left a few empty spots so i can make the missing sizes or a couple spares
i printed in abs to avoid deformation. the file is in 3mf to open in prusa slicer, in order to import negative shapes.
I've add some circle shape to controlling the air. Uploaded: Freecad FCStd file and .step and .stl
Here’s an updated description for your Recreator3D wood version motherboard cover : This is a custom motherboard cover for the Recreator3D, designed specifically for the wood version with a 155mm width. This cover ensures your motherboard…
This model is a remix of the original base plate from JRT3D 's " The Recreator 3D : MK6 " I have modified the original base plate to have compatible mounting points for a cheap 24v power supply I found on amazon , the “ Daokai 24V…
This is the Recreator3D Filament Dryer made from Ender3 parts. It is based around the standard Ender3 235mm x 235mm heated bed. I have verified that it is compatible with the original Ender 3, Ender 3 Pro, and Ender 3 V2. It should work…
This is a mount that holds all but one of the different-sized Cutters for one of the community bottle cutters. The Quick Swap Bottle Cutter that these mounts are for was designed by @DustinRange_1202017
Print four of the feet mounts and screw it into a board or shelf to safely mount it to the wall, but if you lift, is still removable for maintenance.
• UnifiedBase • Tube v2 include the joint, • TubeJoint
