1 / 1
Stronger Quick-swap top for Recreator3D Community Cutter PET bottle cutter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added an extra rib to Dustin's design to help the bearings stay in contact.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 56
- Wydruki
- 2
- Wyświetlenia
- 255
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After printing and assembling Dustin's design I discovered that between my print settings and the thickness of the bottles I was trying to cut the plastic strip was forcing the bearings apart rather than being cut by them. I added a rib between the bearing posts; this will naturally limit the width of strip that can be cut, but it does mean that thicker material can be cut into narrow strips.