1 / 4
Recreator3D Ender 3 V2 Fan Shroud Remake — zdjęcie 1
1 / 4

Recreator3D Ender 3 V2 Fan Shroud Remake

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement fan shroud for Recreator3D MK5 if using Ender 3 V2 as a donor.

Ocena
0 / 5
Polubienia
4
Pobrania
37
Wydruki
0
Wyświetlenia
176
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
GNU General Public License v3.0

Motivation

The Recreator3D MK5 build assumes you have an Ender3 V1. In my case the donor printer was V2, so many things had to be adjusted for the V2 parts, including the fan shroud.

The fan cover STEP file taken from Creality GitHub was obviously suitable only for V1 extruder plate, so I had to redesign the shroud mounting clips and openings keeping in mind that the extruder will now be used for pultrusion only.

Printing

Since the Recreator3D extruder mod removes the gap between the heatblock and the radiator, the latter conducts way more heat to the extruder plate than on a printer. Also parts of the shroud are only a few mm apart from the very hot heatblock.

Thus I suggest printing using PC / PC CF or any other heat-resistant plastic.

Suggested printing settings are: 30% infill, 0.2mm layer height, snug supports everywhere.

Assembly

The fan is attached using M3x12mm bolts. The shroud itself is attached to the extruder plate using a single M3x6mm bolt. Fan cable should be kept as far as possible from the hotend.

 

Tagi