Liczymy pasujące modele…
Z axis mount for Creality Nebula Camera. This will alow you to mount the camera upside down, the part is very minimalistic and flush to the frame. May work on other Ender3 variants. I used this screw to hold the camera in the mount.…
I installed this setup on my S1 it is a GREAT MOD! I went to put it on my v2 sprite upgrade and realized it wasn't going to work so I added the endstop mount . You can use this on a S1 as well i made the parts a little thicker and…
My main design consideration was make an easily serviceable hotend assembly. Its made out of 4 main parts: X carriage, belt fix, main body and cooling parts.. I used parts that I could gather for cheap, for example a MGW9HC linear…
Mid low-cost Ender3V2 Direct Drive mod The main benefits here are A. Direct drive, B. Dual fan cooling, and C. Controlled and directed part cooling airflow I will need to actually get parts to test fit first because my printer clearences…
I was gifted this laser module and to my dismay, the X carriage bracket is aluminum ! The included magnets are useless. Here is a simple little bracket to mount the laser. All you need is a few M3s and a couple washers.
This is just a simple 3DTouch/BLTouch mount for the Ender3v2 Carriage. I had originally chopped up someone elses design to make it work for me but decided to complete redesign one from scratch. Print Settings Printer Brand: Creality…
Inspiration for the conversion has come from multiple sources such as (thank you all): Switchwire - https://vorondesign.com/voron_switchwire Enderwire - https://github.com/boubounokefalos/Ender_SW So I'm calling my conversion ‘enCore3XZ’…
Yet another BLtouch mount for Ender3v2. It moves the probe to the front and right as much as Mini-me hotend duct allows.
Hi, there is my first model. I had this case and decided to create a mount and a box so it's not moving around. You can use a 9by9cm fan to cool the pi and I find the design pretty cool. I printed in PLA but it is kind of squishy so maybe…
Project "Endex3" Ender 3 Idex conversion More detailed description: https://github.com/ernisv/Endex3 Prototype: Would like to get a support? Use comments here Ask in below platforms Use Github issues Ask in discord Would like to support?…
Original model is great, but I wanted to use fine thread screws for the tapered screws to hold in the mains power. I drilled hole to get around this. Since I had an LRS-200-24 pulled from a Voron build (PSU was upgraded) I needed another…
Bracket to keep both the bed and gantry cables away from rubbing or getting caught on the PSU. Uses M5 bolts and table ties. This is a remix of PrinterCat64s https://www.printables.com/model/160017-ender-3-v2-rear-cable-guide -Simplified…
Holds a C270 on the end of the x-axis gantry on a Creality Ender 3v2, Ender Neo, Ender Neo Max, maybe others. Adjustable up and down, requires a M3 18mm or 20mm screw.
Vertical Side Mount for the Ender3v2 screen. I have the printer high on a shelf and needed to access the screen from the side. This mount can be used horizontally too, but you need to update the firmware to Marlin to activate landscape…
Tweezer holder and cutter for the Ender3V2 printer
Ender 3v2 Micro Swiss cooler Utilizing 1x 4015mm and 1x 4010 blower fans. 4010 fan requires no screws. BLTouch fixed bracket included. There's a 2-3mm clearance from the printed part to the silicon sock and with testing for 30min at 230°C…
Température à régler selon votre filament habituel. Filament utilisé : Smartmaterials3d Température buse : 215° Température bed : 60 Vitesse : 70mms Remplissage : 15% Qualité : 0,2mms
A support dedicated to the Ender3V2 with Creality Spider Hotend with 2 40x20 Turbo fans. The attachment is done by the pass-through of the bowden connector and can be stronger with a M3 screw but not necessary. The air flow is controlled…
I wanted a very strong support for the powerful LDO motor and it's gearbox. This design ensure absolutely no parasite movement during extrusion and retraction. I wanted also a good and efficient air flow control. I opted for 2 40x20 turbo…
Copy of the original Ender3V2 Knob but with three arms. It makes scrolling through a bloated SD Card or the Settings (Moving etc.) more…fun i guess. Its quite satisfying. You can simply pull the old Knob out and push the new one on the…
All the credit goes to the original creators. StuTravers and Stewpercharged. StuTravers Logitech mount didn't fit my webcam, so I extended it a bit and added a hole for the USB cable which was hanging and moving my webcam all the time.…
This started out being a remix of another model, but ended up being a total re-design since I wanted different things from the cover. The main aim is to get a silent 80MM fan under the main board, have somewhere to mount a Raspberry Pi…
This one is actually a highly changed remix of another model but the original model is not available in printables so I can not add the original one. There is a .skp (sketchup) file so feel free to create your own remixes and please do…
A Beaglecam mount for the Ender3v2 which can be mounted at the front. I have to admit that the Beaglecam is not really suitable to be attached to any printer directly in front, the camera angle just does not fit for it especially for…
i made this for my ender 3 v2 , 3 ,and 3 pro just love it its such useful thing
Корпус выключателя для профиля типа 40x20, 40x40. ДxШxВ 40x40x15 mm. Отверстие: под выключатель 14x8.5mm, под винты 3 mm Рис. Выключатель который я использовал.
Remix from https://www.printables.com/de/model/188898-logitech-c270-camera-holder-for-30x30-aluminium-pr for ender 3v2, vertical part has been extended to rise camera above bed. At the moment, I cannot recommend this model, as the camera…
This case may not be compatible with ender3s with shorter pads. My ender3 measures 45 mm from the underside of the Y-carriage extrusion to the table, while this case measures 42 mm. Additional Hardware 4 M3x16 (Cover) 4 M3x6 or M2.5x6 for…
Update 2024-01-17 - Added the STEP file. Sorry for the delay on this, kept forgetting. I don't have a lot of time to make edits, so feel free to remix - Just make sure you credit the original. Happy tinkering! Update 2023-02-18 - Added…
PLA mit 30% Füllung. Damit man für das ganze Zubehör mehr Platz am Drucker hat.
For those of you who like to design new parts for your Ender 3 v2, but don't have a reference model with all the dimensions. There is a handful of other models, however, they all are distributed as .stl/.step files. Even worse, some of…
remix from https://www.thingiverse.com/thing:4609560 i reuse the frame and added the holder for my dial indicator on ender3v2 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20…
This mount is made for the TP-Link Tapo C100/110 camera in combination with a Creality Ender 3V2 3D-Printer. The mount is screwed with two M5 screws onto the existing y-axis belt tensioner. You will need to swap the original screws, which…
A Satsana with an integrated BLTouch mount that fits unto an Ender3v2. I made this remix because I wanted to have a Satsana duct with an integrated BLTouch mount, but could not find any that had all the holes that are on an Ender3v2…
updates to use: wider 3mm magnets - I have not modified original body, simply remove the outer edge with a knife. wire relief at the top end stops to ensure fan head doesn't slip
petite boite de rangement pour buse et petit matériel(vis, lecteur de carte…) pour ender3v2
Ender 3 V2 front case for BTT TFT35 SPI no support needed, but you do need to tap the aluminum extrusion to accept screws
Just a simple modification to ScaryPug's model to add a M4 heatset insert insted
Hier teile ich meine LED-Streifen Halterung für den Ender3 v2. Bitte achtet auf die Ausrichtung, ich habe Bilder aus Cura beigefügt. Das Bauteil ist 100mm lang. Für den Ender3 v2 werden 3 Stück benötigt. Alternativ kann die Länge auch in…
Hallo zusammen, hier teile ich euch meine Halterung für die Z-Achsen Spindel. Ich habe diese Halterung konstruiert, damit ich kein Wobble mehr in meinen gedruckten Teilen habe. Als Lager habe ich ein 608RS genommen. Welches einen…
This remix makes it possible to get installed on a Ender 3v2neo profile
I'm really like the original miniSatsana Light, but the design interfere with BLTouch steel-mount from Creality that already attached to my Ender3v2, rather than messing with BLTouch offset, I remix the original design so it can be use…
Simple cable bracket (clip) for a Creality Sprite Pro direct drive on Ender 3 V2 to attach it to default bowden extruder bracket. Giving it in 2 versions: one with Ender name on it and clear one. Not sure about other models. Should fit if…
This is useful for hotend mounts that moves the hotend forward (like all of my designs for top mounted hotends, and likely many other), which usually lead to lost printable space, this gains 10mm back, for the full 235mm in Y But does…
This 45° Holder can be screwed under your Desk or can used as a normal Displaystand. The pictures are somewhat outdated. I've made the base slightly wider in the file. I printed out the holder on the side with supports and it worked great…
Stealthburner Mount for Ender3v2, fits a Spider v4 hotend
###Nozzle Brush v1. I made this with parts floating about the workshop using a pancake stepper motor. There is another version coming with a small servo. Keep a look out for this. Designed for the Ender3v2 but more than likely fits other…
This is the remix of great CR6 2020 extrusion end cap by mourix! With this end cap base converter, you can mount well installed Ender3 S1 LED lighting module on your Voxelab Aquila/Ender3V2 or any close or same X extrusion printers. Top…
Ender 3v2 Micro Swiss cooler v2 for BDsensor probe. IMO, this is a much tidier and more compact cooling solution for the Microswiss hotend unitilizing the contactless BDsensor probe. NOTE: THIS DESIGN IS NOT SUITABLE FOR A BLTouch. For…
This a remix from ScaryPug's design which I decided to fix since the original didn't have a hole for an M3 nut
HAMMER FAN SHROUD FOR: ENDER3v2 + SPIDER v3 HOTEND + SPRITE SE EXTRUDER + CR TOUCH Dual 4020 Dual ball bearing blower fans Zero-Y Offset CR Touch Mount -25mm X Offset Hidden Wires Increased rigidity between Extruder and X Carriage Printed…
Bare Bones Fan Duct. Fans slide in, no screws to hold them in place. 2 screws to hold the duct to the carriage. Print out of PETG or greater material. .4 or .6 nozzles are fine. Bridging must be enabled! No structure or rafts are needed.…
Easy to print lightbar support for the top bar of the Ender3v2 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Filament: Any PLA black Category: 3D Printer Accessories
not tested. good luck printing its going to be a nightmare. the mate to the fan on the plate 80 o the overhangs
This is a fully redesigned Y axis setup, meant for ender3pro, ender3v2, ender3max neo and similar 4040 profile Y extrusion, front and back end holes needs to be screw tapped for M5 (already the case on ender3v2, and confirmed to be the…
Fits Raspberry Pi 3&4 Parts Required x4- 3m heat inserts x1- 40mm 5v fan
Since it happened to me again and again that I accidentally bumped into the belt tensioner while working on Ender 3v2 and thus misadjusted it... a lock was needed. Here it is.
