Micro Swiss Cooler v1.2 for Ender3v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ender 3v2 Micro Swiss cooler
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Ender 3v2 Micro Swiss cooler
Utilizing 1x 4015mm and 1x 4010 blower fans.
4010 fan requires no screws.
BLTouch fixed bracket included.
There's a 2-3mm clearance from the printed part to the silicon sock and with testing for 30min at 230°C no melting occurred with PLA+, so far. Recommend printing in a higher temp resistant filament though like ABS+.
Orientate the stl with teh flatest side down on your slicer of choice with no supports required.
Anyway this design works for me running the extruder fan at 65-75% speed and the part fan at 100% when required.
Generally all fixings are m3 and the Micro Swiss mount requires some thread tapping for this to work where the top two v-slot axels are.
BOM
2/ m6 x8mm BHSC screws - tap holes as explained above.
1/ m3 x6mm BHSC screws - fixing below BLTouch into already theaded hole on MS bracket
2/ m3 x6mm SHCS screws - fixings to mount the BLTouch
2/ m3 x12mm SHCS screws - fixing for the part ducting
3/ m3 x20mm SHCS screws - fixing cap plate and front and back printed parts together
2/ m3 x25mm SHCS screws - upper fan fixing
2/ m2.5 x10mm SHCS self tapping screws - fixing prints together
m3 brass inserts
Have fun and donate if you think my time was worth it.