Micro Swiss Cooler v1.2 for Ender3v2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ender 3v2 Micro Swiss cooler
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 0
- Views
- 266
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Ender 3v2 Micro Swiss cooler
Utilizing 1x 4015mm and 1x 4010 blower fans.
4010 fan requires no screws.
BLTouch fixed bracket included.
There's a 2-3mm clearance from the printed part to the silicon sock and with testing for 30min at 230°C no melting occurred with PLA+, so far. Recommend printing in a higher temp resistant filament though like ABS+.
Orientate the stl with teh flatest side down on your slicer of choice with no supports required.
Anyway this design works for me running the extruder fan at 65-75% speed and the part fan at 100% when required.
Generally all fixings are m3 and the Micro Swiss mount requires some thread tapping for this to work where the top two v-slot axels are.
BOM
2/ m6 x8mm BHSC screws - tap holes as explained above.
1/ m3 x6mm BHSC screws - fixing below BLTouch into already theaded hole on MS bracket
2/ m3 x6mm SHCS screws - fixings to mount the BLTouch
2/ m3 x12mm SHCS screws - fixing for the part ducting
3/ m3 x20mm SHCS screws - fixing cap plate and front and back printed parts together
2/ m3 x25mm SHCS screws - upper fan fixing
2/ m2.5 x10mm SHCS self tapping screws - fixing prints together
m3 brass inserts
Have fun and donate if you think my time was worth it.